Cu Atomic Clusters on N-doped Porous Carbon with Tunable Oxidation State for the Highly-Selective Electroreduction of CO2

Jin Gao,Hui Wang,Kun Feng,Chensheng Xiang,Huibo Wang,Huihui Qi,Yang Liu,He Tian,Jun Zhong,Zhenhui Kang

DOI: https://doi.org/10.1039/d0ma00433b

2020-01-01

Materials Advances

Abstract:Cu atomic clusters supported on an N-doped porous carbon matrix show excellent catalytic activity and superior selectivity for the CO2RR.

What problem does this paper attempt to address?

Ni Single-Atom Catalysts for Highly Efficient Electrocatalytic CO2 Reduction: Hierarchical Porous Carbon As a Support and Plasma Modification

Qiulin Ye,Yaqi Peng,Dongdong Wang,Jiabao Lv,Yaoyue Yang,Yue Liu,Zhifu Qi,Songqiang Zhu,Chunliang Ge,Yan Yang,Angjian Wu,Shengyong Lu

DOI: https://doi.org/10.1039/d3se00858d

IF: 6.813

2023-01-01

Sustainable Energy & Fuels

Abstract:Ni-single atom catalysts with nitrogen-doped porous carbon as the support and plasma modification were adopted for efficient CO2RR to CO.
Stimulating the C-C Coupling Ability of Ultrafine Copper Nanoclusters Via Nitrogen Coordination for Electrocatalytic CO2 Reduction

Yanan Cao,Guodong Sun,Mingzhen Hu,Zhe Wang,Xiaoxin Yang,Xinhu Liang,Zengjian Cai,Hao Ren,Fengyi Shen,Dan Cheng,Kebin Zhou

DOI: https://doi.org/10.1016/j.apcatb.2024.124704

2025-01-01

Abstract:Cu-based materials are widely regarded as the most effective electrocatalysts for selectively reducing CO2 to multi-carbon products. Nevertheless, the ultrafine Cu nanoclusters are generally inefficient in electro-reducing CO2 to multi-carbon products because of their exceptionally high d-band center, which leads to binding with the CO intermediates strongly and impeding the C-C coupling. Herein, we report that a nitrogen coordination strategy can significantly stimulate the ultrafine copper nanoclusters' C-C coupling ability. Strikingly, the Faradaic efficiency (FE) of CO2-to-C(2)H(4 )over the N-coordinated Cu nanoclusters on nitrogen-modified carbon support (Cu-N/NC) is up to 61.4 % with a current density of-208 mA cm(-2) at-1.05 V (vs RHE), which is much superior to the pure copper nanoclusters/nanoparticles (FE(C2H4)<5 %). Theoretical calculations unveil that the N coordination can optimize the d-band center of copper clusters and its adsorption energy toward *CO, which largely reduces the energy barrier of the C-C coupling step (from 1.28 eV to 0.35 eV) and thus improves the C2H4 selectivity. In-situ Raman spectra and CO-TPD tests prove that the Cu-N/NC catalyst exhibits the best CO adsorption strength to benefit C-C coupling. Moreover, the CO(2 )reduction current density of the Cu-N/NC catalyst remains stable at about 210 mA cm(-2) with the FE(C2H4) remaining at about 60 % during a 12-hour durability test, showing excellent catalytic stability.
Stimulating the C−C coupling ability of ultrafine copper nanoclusters via nitrogen coordination for electrocatalytic CO 2 reduction

Yanan Cao,Guodong Sun,Mingzhen Hu,Zhe Wang,Xiaoxin Yang,Xinhu Liang,Zengjian Cai,Hao Ren,Fengyi Shen,Dan Cheng,Kebin Zhou

DOI: https://doi.org/10.1016/j.apcatb.2024.124704

IF: 24.319

2024-10-17

Applied Catalysis B Environmental

Abstract:Cu-based materials are widely regarded as the most effective electrocatalysts for selectively reducing CO 2 to multi-carbon products. Nevertheless, the ultrafine Cu nanoclusters are generally inefficient in electro-reducing CO 2 to multi-carbon products because of their exceptionally high d-band center, which leads to binding with the CO intermediates strongly and impeding the C−C coupling. Herein, we report that a nitrogen coordination strategy can significantly stimulate the ultrafine copper nanoclusters' C−C coupling ability. Strikingly, the Faradaic efficiency (FE) of CO 2 -to-C 2 H 4 over the N-coordinated Cu nanoclusters on nitrogen-modified carbon support (Cu-N/NC) is up to 61.4 % with a current density of −208 mA cm −2 at −1.05 V (vs RHE), which is much superior to the pure copper nanoclusters/nanoparticles (FE(C 2 H 4 )<5 %). Theoretical calculations unveil that the N coordination can optimize the d-band center of copper clusters and its adsorption energy toward *CO, which largely reduces the energy barrier of the C−C coupling step (from 1.28 eV to 0.35 eV) and thus improves the C 2 H 4 selectivity. In-situ Raman spectra and CO-TPD tests prove that the Cu-N/NC catalyst exhibits the best CO adsorption strength to benefit C−C coupling. Moreover, the CO 2 reduction current density of the Cu-N/NC catalyst remains stable at about 210 mA cm −2 with the FE(C 2 H 4 ) remaining at about 60 % during a 12-hour durability test, showing excellent catalytic stability.

chemistry, physical,engineering, chemical, environmental
Metal Oxide Clusters on Nitrogen-Doped Carbon Are Highly Selective for CO2 Electroreduction to CO

Jingkun Li,Andrea Zitolo,Felipe A. Garces-Pineda,Tristan Asset,Mounika Kodali,PengYi Tang,Jordi Arbiol,Jose Ramon Galan-Mascaros,Plamen Atanassov,Iryna Zenyuk,Moulay Tahar Sougrati,Frederic Jaouen

DOI: https://doi.org/10.1021/acscatal.1c01702

IF: 12.9

2021-01-01

ACS Catalysis

Abstract:The electrochemical reduction of CO2 (eCO(2)RR) using renewable energy is an effective approach to pursue carbon neutrality. The eCO(2)RR to CO is indispensable in promoting C-C coupling through bifunctional catalysis and achieving cascade conversion from CO2 to C2+. This work investigates a series of M/N-C (M = Mn, Fe, Co, Ni, Cu, and Zn) catalysts, for which the metal precursor interacted with the nitrogen-doped carbon support (N-C) at room temperature, resulting in the metal being present as (sub)nanosized metal oxide clusters under ex situ conditions, except for Cu/N-C and Zn/N-C. A volcano trend in their activity toward CO as a function of the group of the transition metal is revealed, with Co/N-C exhibiting the highest activity at -0.5 V versus RHE, while Ni/N-C shows both appreciable activity and selectivity. Operando X-ray absorption spectroscopy shows that the majority of Cu atoms in Cu/N-C form Cu-0 clusters during eCO(2)RR, while Mn/, Fe/, Co/, and Ni/N-C catalysts maintain the metal hydroxide structures, with a minor amount of M-0 formed in Fe/, Co/, and Ni/N-C. The superior activity of Fe/, Co/, and Ni/N-C is ascribed to the phase contraction and the HCO3- insertion into the layered structure of metal hydroxides. Our work provides a facile synthetic approach toward highly active and selective electrocatalysts to convert CO2 into CO. Coupled with state-of-the-art NiFe-based anodes in a full-cell device, Ni/N-C exhibits >80% Faradaic efficiency toward CO at 100 mA cm(-2).
Nitrogen Defects in Porous Carbons with Adjacent Silver Nanoclusters for Efficient CO2 Reduction

Yuan Qiu,Zhongyuan Xie,Sanshuang Gao,Huanqi Cao,Shusheng Zhang,Qian Liu,Xijun Liu,Jun Luo

DOI: https://doi.org/10.1002/celc.202200987

IF: 4

2022-12-17

ChemElectroChem

Abstract:Ag clusters on N‐doped carbon were employed for CO2 reduction, which show a maximum CO Faradaic efficiency of 94 % at −0.7 V versus reversible hydrogen electrode and good stability. The N defects coordinated by Ag are confirmed to be active sites with low CO2 reduction energy barrier outcompeting hydrogen evolution. Electrochemical CO2 reduction is an environmentally sustainable way for CO2 conversion and utilization, the development of which needs highly efficient catalysts. Ag‐based materials are one kind of electrocatalyst that are catalytically active for CO2 reduction to CO. In this work, Ag clusters were fabricated on nitrogen‐doped porous carbon nanomaterials by a high‐temperature annealing method. The well‐dispersion of Ag sites on nitrogen‐doped carbons (Ag/NC) promoted CO production. As a result, Ag/NC showed a maximum Faradaic efficiency of 94 % at −0.7 V versus reversible hydrogen electrode (vs RHE) at room temperature. In addition, Ag/NC showed good CO2 reduction stability, and the CO Faradaic efficiency remained stable at about 90 % at −0.7 V vs RHE for 12 h. Density functional theory calculation indicated that the cooperation of Ag and N‐dopings effectively reduced the activation energy barrier of CO2 reduction relative to hydrogen evolution reaction and thus effectively promoted the electrocatalytic reduction of CO2 molecules to CO. This method provides a new idea for the synthesis of CO2 reduction catalysts with higher activity, selectivity and stability.

electrochemistry
N-doped Cu2O with the tunable Cu0 and Cu+ sites for selective CO2 electrochemical reduction to ethylene

Yao Shen,Liuqing Qian,Qianqian Xu,Shilun Wang,Yong Chen,Hengxia Lu,Yu Zhou,Jiexu Ye,Jingkai Zhao,Xiang Gao,Shihan Zhang

DOI: https://doi.org/10.1016/j.jes.2024.03.012

Abstract:The electrochemical carbon dioxide reduction reaction (CO2RR) to high value-added fuels or chemicals driven by the renewable energy is promising to alleviate global warming. However, the selective CO2 reduction to C2 products remains challenge. Cu-based catalyst with the specific Cu0 and Cu+ sites is important to generate C2 products. This work used nitrogen (N) to tune amounts of Cu0 and Cu+ sites in Cu2O catalysts and improve C2-product conversion. The controllable Cu0/Cu+ ratio of Cu2O catalyst from 0.16 to 15.19 was achieved by adjusting the N doping amount using NH3/Ar plasma treatment. The major theme of this work was clarifying a volcano curve of the ethylene Faraday efficiency as a function of the Cu0/Cu+ ratio. The optimal Cu0/Cu+ ratio was determined as 0.43 for selective electroreduction CO2 to ethylene. X-ray spectroscopy and density functional theory (DFT) calculations were employed to elucidate that the strong interaction between N and Cu increased the binding energy of NCu bond and stabilize Cu+, resulting in a 92.3% reduction in the potential energy change for *CO-*CO dimerization. This study is inspiring in designing high performance electrocatalysts for CO2 conversion.
Stabilizing intermediates and optimizing reaction processes with N doping in Cu2O for enhanced CO2 electroreduction

Chunliu Yan,Wen Luo,Huimin Yuan,Guiyu Liu,Rui Hao,Ning Qin,Zhiqiang Wang,Kun Liu,Zhenyu Wang,Dehu Cui,Zhuofeng Hu,Yangchun Lan,Zhouguang Lu

DOI: https://doi.org/10.1016/j.apcatb.2022.121191

2022-01-01

Abstract:Appropriate adsorption strength and modes of intermediates on catalysts and the reaction kinetic energy barrier directly determine the selectivity and productivity of final products during CO2 electroreduction. This work systematically reveals the mechanisms for enhanced CO2 electroreduction on nitrogen-doped Cu2O (N-Cu2O) catalyst by in-situ surface enhanced Raman spectroscopy (SERS) and theoretical calculation. The introduction of N into Cu2O can significantly enhance the CO2 adsorption capacity, binding strength of key intermediates and increase the local pH value, resulting in two-fold enhancement of CO and C2H4 production as compared to bare Cu2O. Meanwhile, the protonation step is promoted, making the formation of COOH center dot & nbsp; quickly and earlier. Therefore, the adsorbed CO(2)(center dot)(-& nbsp;)intermediate formation is produced more rapidly, and the rate-determining step is transferred, continually facilitating the electroreduction of CO2. This study is inspiring in designing high-performance electrocatalysts for CO2 reduction.
Ultrafine Fe2C Iron Carbide Nanoclusters Trapped in Topological Carbon Defects for Efficient Electroreduction of Carbon Dioxide

Jianwei Su,Dianhui Pan,Yan Dong,Yangyuan Zhang,Yulong Tang,Jian Sun,Linjuan Zhang,Ziqi Tian,Liang Chen

DOI: https://doi.org/10.1002/aenm.202204391

IF: 27.8

2023-04-09

Advanced Energy Materials

Abstract:A one‐step ammonia thermal treatment is employed for fabricating ultrafine Fe2C nanometric clusters with a mean size of 1.07 nm in defective carbon by a dual N‐elimination treatment. The as‐obtained nanoscale Fe2C cluster possesses much weaker binding with CO than the Fe2C crystalline surface and other Fe surfaces, thus promoting CO desorption and the overall CO2RR process. Normally, the CO2 reduction reaction (CO2RR) on Fe‐based materials is unfavorable due to the poisoning of reaction sites by CO products. By modulating the electronic structures of Fe sites via carbonization, the CO binding strength can be optimized to facilitate the CO2RR. In the present study, a dual N‐elimination strategy is adopted to synthesize and stabilize a rarely reported iron carbide phase Fe2C nanoclusters with a mean diameter of 1.07 nm trapped in topological carbon defects. Notably, the ultrafine Fe2C clusters present an excellent performance on electrocatalytic CO2RR, which can drive a current density of 8.53 mA cm−2 with Faradaic efficiency of 97.1% for CO production at −0.7 V versus reversible hydrogen electrode. Density functional theory calculations reveal that the nanometric Fe2C cluster possesses much weaker binding with CO than the Fe crystalline surfaces and other iron carbides, thus promoting the CO desorption and overall CO2RR process.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Electronic and Geometric Structure Engineering of Bicontinuous Porous Ag–Cu Nanoarchitectures for Realizing Selectivity-Tunable Electrochemical CO2 Reduction

Wenjun Zhang,Chenhong Xu,Yi Hu,Songyuan Yang,Lianbo Ma,Lei Wang,Peiyang Zhao,Caixing Wang,Jing Ma,Zhong Jin

DOI: https://doi.org/10.1016/j.nanoen.2020.104796

IF: 17.6

2020-01-01

Nano Energy

Abstract:The electrochemical conversion of waste carbon dioxide into hydrocarbon fuels represent a promising strategy for clean and sustainable energy production. However, the design of outstanding electrocatalysts that can reduce CO2 in an efficient and selective manner is challenging, and the fundamental understanding on reaction mechanism is still limited. Herein, we report the preparation of self-supported Ag–Cu bimetallic catalysts with bicontinuous nanoporous geometries and adjustable compositions through an electrochemical anodizing/dealloying process of Ag52Cu39Sn9 alloy foil to exploit their performances in electrocatalytic CO2 reduction. By changing the compositions from Ag91Cu9 to Ag65Cu35, the variations in atomic arrangement and electronic structure around the active sites bring synergistic effects on the binding strength of different reaction intermediates, realizing tunable product selectivity from CO to formate at high Faradaic efficiencies. In-situ Raman analysis and density functional theory calculations confirm that as the Ag–Cu atomic ratio shifts, the variations of formation free-energies and desorption capacities of intermediates lead to different reaction pathways and final products. The findings in this study provide a promising route to modulate the atomic structures and improve the properties of electrocatalysts towards CO2 fixation.
Hydride-doped Ag17Cu10 nanoclusters as high-performance electrocatalysts for CO2 reduction

Xueli Sun,Peng Wang,Xiaodan Yan,Huifang Guo,Lin Wang,Qinghua Xu,Bingzheng Yan,Simin Li,Jinlu He,Guangxu Chen,Hui Shen,Nanfeng Zheng

DOI: https://doi.org/10.1016/j.isci.2023.107850

IF: 5.8

2023-10-01

iScience

Abstract:The atomically precise metal electrocatalysts for driving CO2 reduction reactions are eagerly pursued as they are model systems to identify the active sites, understand the reaction mechanism, and further guide the exploration of efficient and practical metal nanocatalysts. Reported herein is a nanocluster-based electrocatalyst for CO2 reduction, which features a clear geometric and electronic structure, and more importantly excellent performance. The nanocatalysts with the molecular formula of [Ag17Cu10(dppm)4(PhC≡C)20H4]3+ have been obtained in a facile way. The unique metal framework of the cluster, with silver, copper, and hydride included, and dedicated surface structure, with strong (dppm) and labile (alkynyl) ligands coordinated, endow the cluster with excellent performance in electrochemical CO2 reduction reaction to CO. With the atomically precise electrocatalysts in hand, not only high reactivity and selectivity (Faradaic efficiency for CO up to 91.6%) but also long-term stability (24 h), are achieved.

multidisciplinary sciences
Atomic Ni Anchored Covalent Triazine Framework as High Efficient Electrocatalyst for Carbon Dioxide Conversion

Chenbao Lu,Jian Yang,Shice Wei,Shuai Bi,Ying Xia,Mingxi Chen,Yang Hou,Ming Qiu,Chris Yuan,Yuezeng Su,Fan Zhang,Haiwei Liang,Xiaodong Zhuang

DOI: https://doi.org/10.1002/adfm.201806884

IF: 19

2019-03-01

Advanced Functional Materials

Abstract:Electrochemically driven carbon dioxide (CO2) conversion is an emerging research field due to the global warming and energy crisis. Carbon monoxide (CO) is one key product during electroreduction of CO2; however, this reduction process suffers from tardy kinetics due to low local concentration of CO2 on a catalyst's surface and low density of active sites. Herein, presented is a combination of experimental and theoretical validation of a Ni porphyrin‐based covalent triazine framework (NiPor‐CTF) with atomically dispersed NiN4 centers as an efficient electrocatalyst for CO2 reduction reaction (CO2RR). The high density and atomically distributed NiN4 centers are confirmed by aberration‐corrected high‐angle annular dark field scanning transmission electron microscopy and extended X‐ray absorption fine structure. As a result, NiPor‐CTF exhibits high selectivity toward CO2RR with a Faradaic efficiency of >90% over the range from −0.6 to −0.9 V for CO conversion and achieves a maximum Faradaic efficiency of 97% at −0.9 V with a high current density of 52.9 mA cm−2, as well as good long‐term stability. Further calculation by the density functional theory method reveals that the kinetic energy barriers decreasing for *CO2 transition to *COOH on NiN4 active sites boosts the performance. Atomically dispersed NiN4 centers are rationally designed into a porous organic skeleton through an ionothermal approach. The as‐prepared porous materials are applied as electrocatalysts for carbon dioxide conversion and exhibit high carbon dioxide reduction selectivity toward CO production as well as long‐term stability.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Monolithic Nitrogen-Doped Carbon Electrode with Hierarchical Porous Structure for Efficient Electrochemical CO 2 Reduction

Junwei Zhang,Kang Wang,Xitao Wang,Xingang Li

DOI: https://doi.org/10.1021/acsami.4c15571

IF: 9.5

2024-09-25

ACS Applied Materials & Interfaces

Abstract:N-doped carbon materials have garnered extensive development in electrochemical CO(2) reduction due to their abundant sources, high structural plasticity, and excellent catalytic performance. However, the use of powder carbon materials for electrocatalytic reactions limits their current density and mechanical strength, which pose challenges for industrial applications. In this study, we synthesized a monolithic N-doped carbon electrode with high mechanical strength for efficient electrochemical...

materials science, multidisciplinary,nanoscience & nanotechnology
Metal Oxide Clusters on Nitrogen-Doped Carbon are Highly Selective for CO 2 Electroreduction to CO

Jingkun Li,Andrea Zitolo,Felipe A. Garcés-Pineda,Tristan Asset,Mounika Kodali,PengYi Tang,Jordi Arbiol,José Ramón Galán-Mascarós,Plamen Atanassov,Iryna V. Zenyuk,Moulay Tahar Sougrati,Frédéric Jaouen,Felipe A. Garcés-Pineda,José Ramón Galán-Mascarós,Frédéric Jaouen

DOI: https://doi.org/10.1021/acscatal.1c01702

IF: 12.9

2021-07-28

ACS Catalysis

Abstract:The electrochemical reduction of CO2 (eCO2RR) using renewable energy is an effective approach to pursue carbon neutrality. The eCO2RR to CO is indispensable in promoting C–C coupling through bifunctional catalysis and achieving cascade conversion from CO2 to C2+. This work investigates a series of M/N–C (M = Mn, Fe, Co, Ni, Cu, and Zn) catalysts, for which the metal precursor interacted with the nitrogen-doped carbon support (N–C) at room temperature, resulting in the metal being present as (sub)nanosized metal oxide clusters under ex situ conditions, except for Cu/N–C and Zn/N–C. A volcano trend in their activity toward CO as a function of the group of the transition metal is revealed, with Co/N–C exhibiting the highest activity at −0.5 V versus RHE, while Ni/N–C shows both appreciable activity and selectivity. Operando X-ray absorption spectroscopy shows that the majority of Cu atoms in Cu/N–C form Cu0 clusters during eCO2RR, while Mn/, Fe/, Co/, and Ni/N–C catalysts maintain the metal hydroxide structures, with a minor amount of M0 formed in Fe/, Co/, and Ni/N–C. The superior activity of Fe/, Co/, and Ni/N–C is ascribed to the phase contraction and the HCO3– insertion into the layered structure of metal hydroxides. Our work provides a facile synthetic approach toward highly active and selective electrocatalysts to convert CO2 into CO. Coupled with state-of-the-art NiFe-based anodes in a full-cell device, Ni/N–C exhibits >80% Faradaic efficiency toward CO at 100 mA cm–2.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acscatal.1c01702.Physical (XRD, STEM, and XPS), ex situ and operando XAS, and electrochemical (FEs and polarization curves obtained from flow cell tests) characterizations of M/N–C catalysts for eCO2RR or NiFe-based catalysts for OER (PDF)This article has not yet been cited by other publications.

chemistry, physical
d-band center engineering of single Cu atom and atomic Ni clusters for enhancing electrochemical CO2 reduction to CO

Ruina Li,Ching-Wei Tung,Bicheng Zhu,Yue Lin,Feng-Ze Tian,Tao Liu,Hao Ming Chen,Panyong Kuang,Jiaguo Yu

DOI: https://doi.org/10.1016/j.jcis.2024.06.176

2024-11-15

Abstract:The rational design of catalysts with atomic dispersion and a deep understanding of the catalytic mechanism is crucial for achieving high performance in CO2 reduction reaction (CO2RR). Herein, we present an atomically dispersed electrocatalyst with single Cu atom and atomic Ni clusters supported on N-doped mesoporous hollow carbon sphere (CuSANiAC/NMHCS) for highly efficient CO2RR. CuSANiAC/NMHCS demonstrates a remarkable CO Faradaic efficiency (FECO) exceeding 90% across a potential range of -0.6 to -1.2 V vs. reversible hydrogen electrode (RHE) and achieves its peak FECO of 98% at -0.9 V vs. RHE. Theoretical studies reveal that the electron redistribution and modulated electronic structure-notably the positive shift in d-band center of Ni 3d orbital-resulting from the combination of single Cu atom and atomic Ni clusters markedly enhance the CO2 adsorption, facilitate the formation of *COOH intermediate, and thus promote the CO production activity. This study offers fresh perspectives on fabricating atomically dispersed catalysts with superior CO2RR performance.
Synergetic effects of Cu cluster-doped g-C3N4 with multiple active sites for CO2 reduction to C2 products: A DFT study

Fanghe Zhou,Xu Fang,Yonglin Zhang,Wu Yang,Wenquan Zhou,Hao Zhou,Qizhen Liu,Jiang Wu,Fei Qi,Yixuan Shen

DOI: https://doi.org/10.1016/j.fuel.2023.129202

IF: 7.4

2023-12-01

Fuel

Abstract:The photocatalytic reduction of CO2 is a promising strategy for converting this greenhouse gas into valuable products. However, developing highly efficient photocatalysts remains a challenging task. In this study, we investigated the properties of Cu4 and Cu5-doped g-C3N4 photocatalysts using density functional theory. Our findings revealed that Cu clusters can form an Ohmic contact with C3N4, promoting the separation and transfer of photo-generated electrons and holes, and reducing the reaction barrier. We optimized the adsorption models of gas-phase intermediate molecules and identified the most stable configuration with the lowest adsorption energy. The results indicated that Cu clusters and C3N4 can work synergistically to provide active sites for the adsorption of gas-phase molecules, revealing the mechanism for lowering the activation energy. Cu4-doped C3N4 was identified as the most promising photocatalyst through the comparison of the Gibbs free energy change in CO2 reduction and the HER energy barrier. Further research found that the co-adsorption of *CO on the Cu clusters effectively suppressed the hydrogen evolution reaction, providing insights into the potential mechanism underlying the high selectivity of Cu clusters for the production of C2 products through CO2 reduction.

energy & fuels,engineering, chemical
Stabilizing highly active atomically dispersed NiN4Cl sites by Cl-doping for CO2 electroreduction

Zhao Li,Xueqiang Qi,Junjie Wang,Zhaozhao Zhu,Jinxia Jiang,Xiaobin Niu,Andreu Cabot,Jun Song Chen,Rui Wu

DOI: https://doi.org/10.1002/sus2.148

2023-01-01

SusMat

Abstract:Nickel-nitrogen-carbon single-atom catalysts have attracted widespread interest for CO2 electroreduction but they suffer from poor stability. Herein, we report on the preparation of Cl- and N-doped porous carbon nanosheets with atomically dispersed NiN4Cl active sites (NiN4Cl-ClNC) through a molten-salt-assisted pyrolysis strategy. The optimized NiN4Cl-ClNC catalyst delivers exceptional CO2 conversion activity with outstanding stability for over 220 h at -0.7 V versus RHE and a high CO Faradaic efficiency of 98.7% at a CO partial current density of 12.4 mA cm(-2). Moreover, NiN4Cl-ClNC displays a remarkable CO partial current density of approximately 349.4 mA cm(-2) in flow-cell, meeting the requirements of industrial applications. Operando attenuated total reflectance surface-enhanced infrared absorption spectroscopy and density functional theory calculations are used to understand the outstanding activity and stability. Results reveal that the introduced axial Ni-Cl bond on the Ni center and ClC bond on the carbon support synergetically induce electronic delocalization, which not only stabilizes Ni against leaching but also facilitates the formation of the COOH* intermediate that is found to be the rate-determining step.
Highly selective electroreduction of CO 2 to CO with ZnO QDs/N-doped porous carbon catalysts

Zijian Fang,Yanling Zhai,Weiwei Guo,Zhaoyang Sun,Lei Jiao,Zhijun Zhu,Xiaoquan Lu,Jianguo Tang

DOI: https://doi.org/10.1039/d3cc06281c

IF: 4.9

2024-01-01

Chemical Communications

Abstract:ZnO quantum dots supported on porous nitrogen-doped carbon exhibit an excellent CO 2 RR performance, with the faradaic efficiency (CO) of 95.3% and a current density of 22.7 mA cm −2 .

chemistry, multidisciplinary
MOF-Derived Cu2O/Cu Nanospheres Anchored in Nitrogen-Doped Hollow Porous Carbon Framework for Increasing the Selectivity and Activity of Electrochemical CO2-to-Formate Conversion.

Da Li,Tongtong Liu,Zhengyu Yan,Liang Zhen,Jia Liu,Jing Wu,Yujie Feng

DOI: https://doi.org/10.1021/acsami.9b15685

IF: 9.5

2020-01-01

ACS Applied Materials & Interfaces

Abstract:Copper-based metal-organic frameworks (MOFs) and their derivatives have been used for CO2 electroreduction; however, they still have obvious drawbacks like poor selectivity and durability. Here, Cu_btc (btc = benzene-1,3,5-tricarboxylate)-derived Cu2O/Cu anchored in a nitrogen-doped porous carbon framework (Cu2O/Cu@NC) was prepared for CO2 electroreduction. Cu2O/Cu@NC-800 (carbonizing Cu_btc at 800 degrees C) produced formate and ethanol concurrently with an overpotential as low as similar to 380 mV. However, it exhibited higher selectivity toward formate against ethanol, with the maximum formate faradaic efficiencies of 70.5% at -0.68 V vs a reversible hydrogen electrode (RHE), which was 1.79 and 1.84 times higher than that of Cu2O/Cu@NC-700 and Cu2O/Cu@NC-900. This superior performance remained stable for over 30 h. The enhancement in activity and selectivity was attributed to (i) a higher Cu content and well-dispersed Cu2O/Cu nanoparticles inside the carbon frameworks, which provided abundant active reaction sites, and (ii) a higher content of N doped into the Cu2O/Cu lattice to possibly facilitate *OCHO generation. These findings provided a convenient strategy to enhance the activity and selectivity of catalysts for efficient CO2 electroreduction.
A 2D Porous Cu3N Catalyst for Efficient CO Electroreduction to Multicarbon Products at an Ampere Level Current Density

Liming Cheng,Dayin He,Xianhui Ma,Hongfan Deng,Yaner Ruan,Rongbo Sun,Lin Tian,Huang Zhou,Jian Chen,Xinqiang Wang,Hongge Pan,Wenxin Guo,Yuen Wu

DOI: https://doi.org/10.1002/adfm.202406056

IF: 19

2024-06-04

Advanced Functional Materials

Abstract:A two‐step pyrolysis strategy is developed to construct 2D porous Cu3N catalysts for efficient CO electroreduction to multicarbon products. The high‐purity Cu3N with abundant hierarchical pores demonstrated a C2+ faradaic efficiency exceeding 90% at 0.6 A cm−2 and 87% selectivity at 1 A cm−2, attributed to high coverage and adsorption of CO intermediates, which facilitate C‐C coupling and the formation of C2+ products. The maturation of CO2 electrolysis to CO technology has rendered a cascade catalysis scheme, utilizing CO reduction as a media step, a promising strategy to produce high‐value C2+ fuel. However, the current catalysts employed in CO electroreduction (ECORR) face severe hydrogen evolution reactions at high current densities. Herein, a 2D porous Cu3N (2D‐P‐Cu3N) catalyst is reported with outstanding ECORR performance prepared by a two‐step pyrolysis strategy. This strategy mainly relies on the sequential annealing of the Cu2(OH)2CO3 precursors in an oxidation and reduction atmosphere, which can not only convert it into high‐purity Cu3N, but also endow it with an abundant hierarchical pores structure. The pores can significantly improve the in‐plane conductivity and mass transfer capacity of Cu3N, enabling a C2+ faradaic efficiency exceeding 90% at a current density of 0.6 A cm−2. Even at an ampere grade current density of 1 A cm−2, it maintains an impressive 87% selectivity, surpassing most of the reported Cu‐based catalysts. In‐situ Raman spectroscopy confirms that 2D‐P‐Cu3N exhibits high coverage and adsorption of CO intermediates, thus enhancing C‐C coupling and promoting the generation of C2+ products. This discovery opens further exploration of catalysts for selective CORR to C2+ products.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Electrocatalytic conversion of CO2 to CH4 over Cu-based cluster via atomically precise local environment modulation

Li Shi,Hanbo Wu,Wendi Xu,Wei Fu,Xiaobing Wang,Zhengyu Gu,Xiuyun Zhang,Jianyu Chen,Yanwen Ma,Jin Zhao

DOI: https://doi.org/10.1007/s40843-024-3088-5

2024-10-04

Science China Materials

Abstract:The development of low-cost, high-performance catalysts at the atomic scale has become a challenging issue for the large-scale applications of renewable clean energy technologies. Herein, on the basis of density functional theory calculation, we systematically investigate the effect of the local environment on the activity and selectivity of electrochemical carbon dioxide reduction reaction over single/multi-atom alloy clusters formed by the transition metal (Fe, Co, and Ni)-doped Cu13/55 clusters. Our findings reveal that the catalytic performance of multi-atom alloy clusters far exceeds that of Cu (211) surface. Notably, the Co666 configuration exhibits exceptional performance with a remarkably low free energy barrier of just 0.33 eV. Furthermore, our investigations demonstrate that catalytic performance is predominantly determined by the relative proportion of modifying metallic dopant species that generate a coordination number of 6. This ratio principally influences the adsorption strength of key intermediates (HCOO* and H 2 COO*). Bader charge analyses and free energy calculations elucidate a new mechanistic pathway, wherein the hydrogenation of CO 2 at C-sites catalyzes the reduction of CO 2 to CH 4 . This theoretical research provides valuable insights into the fundamental processes and energy landscapes involved in converting CO 2 to CH 4 on the studied catalytic structure, potentially paving the way for more efficient and sustainable carbon dioxide utilization strategies.

materials science, multidisciplinary

Cu Atomic Clusters on N-doped Porous Carbon with Tunable Oxidation State for the Highly-Selective Electroreduction of CO2

Ni Single-Atom Catalysts for Highly Efficient Electrocatalytic CO2 Reduction: Hierarchical Porous Carbon As a Support and Plasma Modification

Stimulating the C-C Coupling Ability of Ultrafine Copper Nanoclusters Via Nitrogen Coordination for Electrocatalytic CO2 Reduction

Stimulating the C−C coupling ability of ultrafine copper nanoclusters via nitrogen coordination for electrocatalytic CO 2 reduction

Metal Oxide Clusters on Nitrogen-Doped Carbon Are Highly Selective for CO2 Electroreduction to CO

Nitrogen Defects in Porous Carbons with Adjacent Silver Nanoclusters for Efficient CO2 Reduction

N-doped Cu2O with the tunable Cu0 and Cu+ sites for selective CO2 electrochemical reduction to ethylene

Stabilizing intermediates and optimizing reaction processes with N doping in Cu<sub>2</sub>O for enhanced CO<sub>2</sub> electroreduction

Ultrafine Fe2C Iron Carbide Nanoclusters Trapped in Topological Carbon Defects for Efficient Electroreduction of Carbon Dioxide

Electronic and Geometric Structure Engineering of Bicontinuous Porous Ag–Cu Nanoarchitectures for Realizing Selectivity-Tunable Electrochemical CO2 Reduction

Hydride-doped Ag17Cu10 nanoclusters as high-performance electrocatalysts for CO2 reduction

Atomic Ni Anchored Covalent Triazine Framework as High Efficient Electrocatalyst for Carbon Dioxide Conversion

Monolithic Nitrogen-Doped Carbon Electrode with Hierarchical Porous Structure for Efficient Electrochemical CO 2 Reduction

Metal Oxide Clusters on Nitrogen-Doped Carbon are Highly Selective for CO 2 Electroreduction to CO

d-band center engineering of single Cu atom and atomic Ni clusters for enhancing electrochemical CO2 reduction to CO

Synergetic effects of Cu cluster-doped g-C3N4 with multiple active sites for CO2 reduction to C2 products: A DFT study

Stabilizing highly active atomically dispersed NiN<sub>4</sub>Cl sites by Cl-doping for CO<sub>2</sub> electroreduction

Highly selective electroreduction of CO 2 to CO with ZnO QDs/N-doped porous carbon catalysts

MOF-Derived Cu2O/Cu Nanospheres Anchored in Nitrogen-Doped Hollow Porous Carbon Framework for Increasing the Selectivity and Activity of Electrochemical CO2-to-Formate Conversion.

A 2D Porous Cu3N Catalyst for Efficient CO Electroreduction to Multicarbon Products at an Ampere Level Current Density

Electrocatalytic conversion of CO2 to CH4 over Cu-based cluster via atomically precise local environment modulation