Abstract:This work presents a comprehensive numerical evaluation of PERC and TOPCon technologies, focusing on the impact of radiation-induced defects. This assessment is conducted for p-type silicon solar cells as they are intrinsically more resistant to radiation defects. By rigorously calibrating recombination parameters, radiation-induced defect profiles, and other pertinent details, a robust basis is established for an in-depth comparison of the performance characteristics displayed by both architectures under space conditions. The investigation reveals that when utilizing substrates with high doping levels, both PERC and TOPCon cells exhibit nearly identical beginning-of-life (BOL) and end-of-life (EOL) performance. However, with lower substrate doping concentrations, both technologies show improved BOL efficiency. Notably, this enhanced BOL efficiency does not translate into superior EOL efficiency. This distinction in EOL efficiency can be attributed to two primary factors triggered by radiation exposure. Firstly, the emergence of defects leads to a reduction in open-circuit voltage. Secondly, dopant compensation contributes to an increase in series resistance. Specifically, for PERC cells, the challenge of elevated series resistance is further exacerbated by the requirement for majority carriers to traverse both vertically and laterally to reach the rear metal contact. When a robust defect recovery mechanism or resilient cover glass is absent, substrates characterized by lower doping levels display increased susceptibility to the adverse effects of radiation-induced defects and the subsequent dopant compensation. Under these circumstances, the TOPCon technology demonstrates a significant advantage over PERC, particularly for high electron fluence due to its full area contacts for both minority and majority charge carriers.

Compound Poisson Process Based Reliability Analysis Method for Performance Degradation of Gaas Space Solar Cells

Reliability Analysis and Design of a Single Diode Solar Cell Model Using Polynomial Chaos and Active Subspace

Reliability evaluation of spacecraft power generation performance with competitive failure processes under irradiation

Accelerated degradation tests of large area a-Si solar cells

Investigation of degradation characteristics of electron irradiated GaInP/InGaAs/Ge solar cell by numerical simulation model

Empirical-Statistics Analysis for Zero-Failure GaAs MMICs Life Testing Data.

Radiation Damage of Space GaAs/Ge Solar Cells Evaluated by Displacement Damage Dose

Dependability Research on High Effective Semiconductor of Power Device for Space Solar Power Station

Synergistic Effect of Temperature Cycling and Atomic Oxygen on the Parallel Gap Resistance Welding Joint in GaAs Space Solar Panel

Processes of the Reliability and Degradation Mechanism of High-Power Semiconductor Lasers

Reliability Analysis and Utilization of PEMs in Space Application

Physics-of-degradation-based life prediction of solder interconnects of long-life solar arrays in low-earth orbit

Modeling and Analysis of Non-Linear Phenomena of Satellite Power System in Space Environment and Hazard-Risk Evaluations

Analysis and modeling of space radiation effects in quantum dot based nanomaterials for high-efficiency photovoltaic cells

Failure mechanism of parallel gap resistance welding joint between Ag foil and GaAs solar cell by temperature cycling

Comparative study of parallel gap resistance welding joints between different interconnected foils and GaAs solar cells: Microstructure and thermal reliability

Evaluation of the Performance Degradation of Silicon Solar Cell Irradiated by Low-Level (<1 MeV) Energetic Particles Using Photocarrier Radiometry

Manufacturing Process-Based Storage Degradation Modelling and Reliability Assessment

A comprehensive study of parallel gap resistance welding joint between Ag foil and front electrode of GaAs solar cell

Failure Mode and Effects Analysis and Time Varying Reliability of Solar Array Drive Assembly

Comparative analysis of radiation-induced effects on the performance of p-type PERC and TOPCon solar cells for space applications