Abstract:Two dynamical models, the traditional method of moments coupled model (MCM) and Taylor-series expansion method of moments coupled model (TECM) for particle dispersion distribution and gravitation deposition are developed in three-dimensional ventilated environments. The turbulent airflow field is modeled with the renormalization group (RNG) k–ε turbulence model. The particle number concentration distribution in a ventilated room is obtained by solving the population balance equation coupled with the airflow field. The coupled dynamical models are validated using experimental data. A good agreement between the numerical and experimental results can be achieved. Both models have a similar characteristic for the spatial distribution of particle concentration. Relative to the MCM model, the TECM model presents a more close result to the experimental data. The vortex structure existed in the air flow makes a relative large concentration difference at the center region and results in a spatial non-uniformity of concentration field. With larger inlet velocity, the mixing level of particles in the room is more uniform. In general, the new dynamical models coupled with computational fluid dynamics (CFD) in the current study provide a reasonable and accurate method for the temporal and spatial evolution of particles effected by the deposition and dispersion behaviors. In addition, two ventilation modes with different inlet velocities are proceeded to study the effect on the particle evolution. The results show that with the ceiling ventilation mode (CVM), the particles can be better mixed and the concentration level is also higher. On the contrast, with the side ceiling ventilation mode (SVM), the particle concentration has an obvious stratified distribution with a relative lower level and it makes a much better environment condition to the human exposure.

Ventilation Effectiveness Physical Model And Cfd Solution

Validation Of Cfd Model For Research Into Application Of Displacement Ventilation To Hong Kong Buildings

Key Factors in Displacement Ventilation Systems for Better IAQ

Validation of CFD Model for Research into Displacement Ventilation

Urban Ventilation - A New Concept and Lumped Model

Numerical Simulation Of Ventilation Effectiveness In A Hangar

CFD Model Establishment of Under-floor Air Distribution and IT Equipment Heat Dissipation of Data Center

Ventilation performance prediction for buildings: A method overview and recent applications

Validation of CFD Simulations for Natural Ventilation

Appropriate CFD Turbulence Model for Improving Indoor Air Quality of Ventilated Spaces

Modeling of Coupled Urban Wind Flow and Indoor Air Flow on a High-Density Near-Wall Mesh: Sensitivity Analyses and Case Study for Single-Sided Ventilation.

A Model-Based Air Balancing Method of a Ventilation System

CFD-based simulation analysis of indoor and outdoor ventilation environment

Building ventilation: A pressure airflow model computer generation and elements of validation

Cfd Analysis of Ventilation Effectiveness in A Public Transport Interchange

Numerical Analysis of Microclimate of Desk Displacement Ventilation Using a Zero-equation Turbulence Model

VENTILATION AND AIR CONDITIONING DESIGNING WITH CFD

CFD and ventilation research

The Effect of Vent Inlet Aspect Ratio and Its Location on Ventilation Efficiency

Investigation Of The Ventilation In A Model Room Based On Zero-Equation Model And Piv Technique

CFD Modeling of Particle Dispersion and Deposition Coupled with Particle Dynamical Models in a Ventilated Room