Abstract:The Rein “Thermostromuhr”, 1 the best method available for measuring flow in unopened vessels, is limited to mean flow measurements. In this laboratory a new method was developed which can follow rapid flow changes and which, besides, possesses the further advantage that the deflection bears a linear relation to the flow. This flowmeter is based on the principle that an electromotive force is induced in a conductor moving so as to cut the lines of force in a magnetic field. If a wire is moving through the field in a direction perpendicular to its own axis and to the lines of force, then the potential difference at the ends of the wire is given by the expression : where E denotes the induced voltage, H is the strength of the magnetic field, 1, the length of the wire and v, its velocity. A steady potential difference can be obtained by moving an endless metal belt, mercury or an electrolytic solution between the magnet poles. Here 1 would indicate the width of the conductor used. The induced electromotive force generated in the case of the solution can be tapped by introducing 2 non-polarizable electrodes through the wall of the tube through which the liquid is flowing. Since the induced voltage is proportional to the velocity of fluid flow, the current flowing through the galvanometer connected to these electrodes will be a linear function of the rate of flow. This was verified by actual trial with solutions of various concentrations of copper sulphate and sodium chloride using copper electrodes for the former and silver-silver chloride electrodes for the latter.

Flow Imaging System Based On Electromagnetic Induction

Study of No-liquid Calibration Technique for the Medium-and-large Diameter Electromagnetic Flowmeter

Electromagnetic induction method for flow pattern reconstruction

Flow Measurement by Electromagnetic

An Online Flow Pattern Identification System for Gas-Oil Two-Phase Flow Using Electrical Capacitance Tomography

Study on Flow Pattern Identification of Gas-oil Two-phase Flow Based on Electrical CaPacitance Tomography and Fuzzy Pattern Recognition

Hardware Implementation and Evaluation of Electromagnetic Flow Tomography System for Water-Continuous Flows.

Reconstruction of the magnetic field in the measuring volume of an electromagnetic flow sensor

Electromagnetic Sensing And Imaging Methods In Industrial Flow Measurements

Landweber iterative algorithm based on regularization in electromagnetic tomography for multiphase flow measurement

Velocity Profile Reconstruction Method for Electromagnetic Flow Tomography: A Simulation Study

Visualization of the global flow structure in a modified Rayleigh-Benard setup using contactless inductive flow tomography

Gas–oil two-phase flow measurement using an electrical capacitance tomography system and a Venturi meter

On-line Monitoring of Nonaxisymmetric Flow Profile with a Multielectrode Inductance Flowmeter

Physical Constraint Flow Field Reconstruction Method for Immersion Scan-Step Flow

An Electromagnetic Flowmeter. Principle of the Method and its Application to Bloodflow Measurements

Multi-Electrode Electromagnetic Flowmeter

Two-Field Excitation for Contactless Inductive Flow Tomography

An Improved Electromagnetic Flowmeter

Hardware Design for Detecting Blood Flow Based on Electromagnetic Induction

Real-time Monitoring Multi-phase Flow Using Electrical Impedance Tomography