Abstract:Ultrasonic flowmeters (UFMs) based on the principle of transit time difference are widely used in process industries. The transit time difference is obtained through analyzing received acoustic signals generated by a couple of transducers located upstream and downstream respectively. The quality of received acoustic signal will directly affect the measurement accuracy of UFM. For this reason, a measurement-calculation coupled approach combining measurement tools and numerical simulation for calculating the acoustic signal of UFM is proposed in this paper. The method can predict the acoustic signals of UFM with different flowrates. First, important boundary condition (vibration velocity on transmitter transducer surface) is measured by measurement tool, which can reduce computational complexity and also avoid modeling transmitter transducers. Second, simulating the wave propagation (difficult to access experimentally) within moving medium by using the measured vibration velocity. Third, obtaining the transfer function of receiver by comparing estimated force acting on the receiver transducer surface with measured voltage signal from receiver, which can avoid modeling receiver transducer. Finally, predicting the received acoustic signal at different flowrates by using the transfer function. The rationality of predicted data was validated by comparing experimental and predicted acoustic signal on receiver transducer at different flowrates. A good agreement between simulated and experimental data was obtained, which means that the working processes of the acoustic signal generated by actual transducers inside UFMs can be accurately predicted based on this method. Analysis of the predicted results will provide good guides and advices to the design of UFMs involving actual application.

Reconstruction of the magnetic field in the measuring volume of an electromagnetic flow sensor

Divisionally Analytical Reconstruction of the Magnetic Field Around an Electromagnetic Velocity Probe

A Method Based on Measured Boundary Conditions for Reconstructing the Magnetic Field Distribution of an Electromagnetic Mechatronic System

Study of No-liquid Calibration Technique for the Medium-and-large Diameter Electromagnetic Flowmeter

Divisionally Analytical Solutions of Laplace'S Equations for Dry Calibration of Electromagnetic Velocity Probes

Magnetic Field Estimation in Measurement Dead Domain for Dry Calibration of Electromagnetic Flowmeter

Electromagnetic induction method for flow pattern reconstruction

Adaptive Measurement for Automated Field Reconstruction and Calibration of Magnetic Systems

Physical Constraint Flow Field Reconstruction Method for Immersion Scan-Step Flow

Excitation Structure Design and Magnetic Field Analysis of a New Electromagnetic Flowmeter Based on Magnetically Permeable Material

Flow Measurement by Electromagnetic

Flow Imaging System Based On Electromagnetic Induction

Method to Calculate Induced Voltage of Electromagnetic Flow Sensor Based on Multi-physics Coupling

Dry Calibration Technique of Electromagnetic Flowmeters

A Novel Method for Locating PM Marker Based on Magnetic Field Reconstruction

A Method Combining Measurement Tool and Numerical Simulation for Calculating Acoustic Signals of Ultrasonic Flowmeter

Theoretical and Experimental Study on Magnetic-Fluid-based Flow Sensors

Calculation and Measurement of the Magnetic Field in a Large Diameter Electromagnetic Flow Meter

A New Method to Measure the Residual Flux by Magnetic Sensors and a Finite-Element Model.

An Improved Electromagnetic Flowmeter

Experiment and Simulation Study of 3D Magnetic Field Sensing for Magnetic Flux Leakage Defect Characterisation