Abstract:Ternary alloy CdS x Se 1–x has the physical properties of CdS and CdSe, and its band gap can be adjusted by changing the component ratio of the elements. The alloy has excellent photoelectric properties and has potential application in optoelectronic devices. Although one has made some research progress of the CdSSe-based photodetectors, their performances are still far from the commercial requirements, so how to improve the performance of the device is the focus of current research. In this work, a single crystal CdS 0.42 Se 0.58 nanobelt device is first prepared by thermal evaporation. Under 550 nm illumination and 1 V bias, the ratio of photocurrent to dark current of the device is 1.24×10~3, the responsivity arrives at 60.1 A/W, and the external quantum efficiency reaches 1.36×10~4%, and the detectivity is 2.16×10 11 Jones. Its rise time and fall time are about 41.1/41.5 ms, respectively. Secondly, after the CdSSe nanobelt is decorated by Au nanoislands, the optoelectronic performance of the device is significantly improved. Under 550 nm illumination and 1 V bias, the I p /I d ratio, responsivity, external quantum efficiency and detectivity of the device are increased by 5.4, 11.8,11.8 and 10.6 times, respectively, and the rise time and fall time are both reduced to half of counterparts of single CdSSe nanobelt. Finally, the microscopic physical mechanism of the enhanced optoelectronic performance of the device is explained based on localized surface plasmon resonance of Au nanoislands. After the combination of gold nanoislands and CdSSe nanobelt, the difference in Fermi level between them results in the transfer of electrons from CdSSe nanobelt to Au nanoislands, thus forming an internal electric field at the interface, which is directed from CdSSe nanobelt to Au nanoislands. Under illumination, the electrons in the Au nanoislands acquire enough energy to jump over the Schottky barrier because of localized surface plasmon resonance. These photoexcited hot electrons are trapped and stored in extra energy levels above the conduction band minimum, and then are cooled down to the band edge, thus realizing the transfer of electrons from Au nanoislands to CdSSe nanobelt. Moreover, the internal electric field also greatly promotes the transfer of hot electrons from Au nanoislands to CdSSe nanobelt, and inhibits the recombination of carriers at the interface,resulting in large photocurrent. Our work provides an effective strategy for fabricating high-performance photodetectors without increasing the device area.

CdS/CdSO4 Nanoflower-Based Photodetector with Enhanced Photoelectric Performances

CdS/CdSO 4 Nanoflower-Based Photodetector with Enhanced Photoelectric Performances

High-Performance 1D CdS/2D Te Heterojunction Photodetector

Highly-enhanced Performance of TiO 2 Nanotubes Attached with CdS quantum Dots

CdS Nanoscale Photodetectors

One-step fabrication of CdS nanoflake arrays and its application for photodetector

Single‐Crystalline CdS Nanobelts for Excellent Field‐Emitters and Ultrahigh Quantum‐Efficiency Photodetectors

Fast Response CdS-CdSxTe1-x-CdTe Core-Shell Nanobelt Photodetector

Single CdS Nanowire Photodetector Fabricated by FIB

Self-powered CdS nanorods/planar-Si photodetector and its performance optimization by fully developing pyro-phototronic effect

Emerging High-Performance SnS/CdS Nanoflower Heterojunction for Ultrafast Photonics

High-performance photodetectors based on two-dimensional tin(II) sulfide (SnS) nanoflakes

Enhanced Optoelectronic Characteristics of MoS2-based Photodetectors Through Hybridization with CdS0.42Se0.58 Nanobelt

Enhancing and broadening the photoresponse of CdS nanowire by constructing core–shell heterostructure

Extraordinarily Enhanced Gas Phase Photoelectric Response of CdS/TiO 2 Nanocomposite Photoelectrode: CdS As a Sensitizer and a Hole Capturer

Performance-Enhancing Ultraviolet Photodetectors Established on Individual In2o3 Nanowires Via Coating A Cuo Layer

Enhanced optoelectronic characteristics of MoS2-based photodetectors through hybridization with CdSSe nanobelt

High‐Performance Ferroelectric Polymer Side‐Gated CdS Nanowire Ultraviolet Photodetectors

High-performance Photodetectors Based on Au Nanoislands Decorated CdSSe Nanobelt

Preparation and Characterization of Nanostructured Inorganic Copper Zinc Tin Sulfide-Delafossite Nano/Micro Composite as a Novel Photodetector with High Efficiency

Large-area hierarchical Bi2O2S flowers composed of 2D ultrathin nanosheets for high performance self-powered IR photodetector