Abstract:When magnetic saturation occurs during the operation of a permanent magnet (PM) slotless brushless DC motor, the material permeability will no longer be a constant value, and the neglected magnetic saturation model used for motor optimization will no longer be applicable. And considering that the increase in motor torque will lead to a high temperature rise of the winding, therefore, an electromagnetic heat coupling model applicable to the occurrence of magnetic saturation in the motor is established, and the model is utilized in combination with the particle swarm algorithm to enhance the maximum output torque of the motor. Firstly, a 100 W, 16,400 r/min high-speed PM slotless DC brushless motor is taken as the object of study, and its electromagnetic–thermal coupling model is established to derive the analytical equations for the electromagnetic torque with respect to the split ratio, the thickness of the stator yoke, the PM thickness, and the copper loss. Secondly, based on the modeling, the motor was optimized using a particle swarm algorithm to maximize the output torque and minimize the copper loss. Finally, a prototype was fabricated and verified with the prototype through no-load and load experiments. The difference between the theoretical maximum output torque and the experimental maximum output torque is less than 8%. The results show that this method can effectively predict the maximum output torque of the motor in the case of magnetic saturation, and the model is suitable for increasing the maximum output torque of slotless brushless DC motors under space constraints.

Split Ratio Optimization For High-Speed Permanent Magnet Brushless Motors

Analytical determination of optimal split ratio for overlapping and non-overlapping winding external rotor PM brushless machines

Optimal Split Ratio in Fractional-Slot Interior Permanent-Magnet Machines With Non-Overlapping Windings

Comparison of Optimal Design and Performance of PM Machines Having Non-Overlapping Windings and Different Rotor Topologies

Influence of Design Parameters on Output Torque of Novel Doubly-Fed Flux-Switching Permanent Magnet Machines

Solution of Permanent Magnet Synchronous Motors with Partition between Poles Halbach Magnet

Optimal Split Ratio for High Torque Density PM Machines Based on Analytical Determination

Split ratio optimisation of high-speed permanent magnet synchronous motor with multi-physics constraints

Design of High-Speed Permanent Magnet Motor Considering Rotor Radial Force and Motor Losses

Design and Analysis of a 500W 120000rpm High-Speed Permanent Magnet Motor

Design Optimization with Outer Rotor Interior Permanent Magnet Synchronous Motor with Hybird Permanent Magnet

Optimized Design of High Torque Density Permanent Magnet Synchronous Motor with Halbach Magnet

Hybrid Analytical Model for Predicting the Electromagnetic Losses in Surface-Mounted Permanent-Magnet Motors

Dynamic Reluctance Mesh Modeling and Losses Evaluation of Permanent Magnet Traction Motor

Reduction of Rotor Loss in High-Speed Permanent Magnet Motors by Design Method

Comparative Study of 6-Slot/2-pole High-Speed Permanent Magnet Motors with Different Winding Configurations

Novel Magnetic Field Modeling Method for a Low-Speed, High-Torque External-Rotor Permanent-Magnet Synchronous Motor

Analysis and Research on No-Load Air Gap Magnetic Field and System Multi-Objective Optimization of Interior PM Motor

Study on Stator Groove and Rotor Pole Combination of Permanent Magnet Brushless DC Motor

Optimization of PM Slotless Brushless DC Motors Considering Magnetic Saturation and Temperature Limitation

Loss-Optimization Method of Permanent-Magnet Synchronous Motor Based on Precise Stator Iron Loss Model