Abstract:Electrochemical reactions occur at the electrode/electrolyte interface. In lithium-ion batteries, the reversible Li ion insertion/desertion from the interfaces of electrodes gives the capacity of the battery. The surface phase transition and component chemical states change during the lithiation/delithiation in turn hugely effect the further battery capacity and reversibility. In the past decades, many ex-situ characterizations gave some insights of electrode surface behavior after cycling. However, the surface chemistry of electrode relies decisively on the real battery operation condition, e.g. the passive layer formed on the electrode surface changes dramatically with the absence of electrolyte. Therefore it is emerging and necessary to develop operando study for electrode/electrolyte interface probing during battery cycling. X-ray photoelectron spectroscopy (XPS) as a surface sensitive technique detects the photoelectrons ejected from core level with certain pass energy. The binding energy of the electrons give the information of chemical composition and chemical states of the materials. Ambient pressure XPS, developed rapidly in recent years after since it gives possibility of the participation of gas and/ liquid phase, enabling the observation of structure dynamics during chemical reactions, thereby unprecedentedly extended the application of the technique. A method called dip-and-pull is used for operando liquid/solid interface probing. With a typical three-electrode system, the electrode is pulled up from the electrolyte with still contact to liquid to maintain the circuit. A thin film of electrolyte formed with a shape of meniscus at the interface of electrode, electrolyte and atmosphere is probed through. The probing of the electrochemical active surface through the liquid can be achieved with an optimized liquid layer and surface condition. In this study Lithium cobalt oxide (LCO), as the most widely used positive electrode for Li-ion battery with rock salt layered structure optimized for reversible Li intercalation/deintercalation, is used for interface dynamics investigation. As Li is deintercalated from LCO structure, the charge transfer from Li + to Co-O environment causes a phase change. It was commonly assumed that the charge due to the deintercalation of Li from structure is fully transferred to Co 3+ , i.e. the loss of one electron contributes to one Co 4+ from Co 3+ oxidation. However, it is recently reported that the real condition maybe more complicated. The charge transfer from Li + to O a- (a<2) might take place especially during high voltage due to the hybrid fermi level of O and Co which might increase the mobility of O a- and further results in cobalt reduction and oxygen evolution reaction. But the mechanism of structure evolution under corresponding potentials are very unclear. In this study, with the operando probing with APXPS, it is discovered that a native phase of Co 2+ may play an unignorable role in the charge transfer, giving some new understandings of phase transition during lithiation/delithiation (see figure 1). With the development of APXPS for battery probing, combining with software data treatment, a clearer picture of phase evolution is possible to be given by time-resolved probing with APXPS. Potentially hidden intermediate states during electrochemical reactions which cannot be given from ex-situ probing are resolved. Figure 1

Time-Of-Flight Secondary Ion Mass Spectrometry.Electrochemical Analysis Of Electrode-Electrolyte Interface At High Vacuum Of 1 X 10(-5) Pa

Coupled Time-of-Flight Secondary Ion Mass Spectrometry-Electrochemical Analysis of Electrode-Electrolyte Interface at High Vacuum of 10−5 Pa

Visualization of the Electrolyte Migration under Electrochemical Process by ToF-SIMS

In Situ Chemical Probing of the Electrode-Electrolyte Interface by Tof-Sims

Proton-Coupled Electron Transfer of Coenzyme Q in Unbuffered Solution by Pore Confined in Situ Liquid ToF-SIMS

A Tiny Pore-Confined Solid-Liquid Interface for In-Situ ToF-SIMS Electrochemistry of Nitrobenzoic Acid

Probing Aqueous Surfaces by ToF-SIMS

Pore confined time-of-flight secondary ion electrochemical mass spectrometry

Performance of a microfluidic device for in situ ToF-SIMS analysis of selected organic molecules at aqueous surfaces

Two New Devices for Identifying Electrochemical Reaction Intermediates with Desorption Electrospray Ionization Mass Spectrometry.

Investigation of the Ionization Mechanism of NAD+/NADH-Modified Gold Electrodes in ToF-SIMS Analysis

Metal/Matrix Enhanced Time-of-flight Secondary Ion Mass Spectrometry for Single Cell Lipids Analysis

Monitoring the Behavior of Na Ions and Solid Electrolyte Interphase Formation at an Aluminum/Ionic Liquid Electrode/Electrolyte Interface via Operando Electrochemical X-ray Photoelectron Spectroscopy

Pore Confined Liquid-Vacuum Interface for Charge Transfer Study in an Electrochemical Process.

Operando Ambient Pressure X Ray Photoelectron Spectroscopy for Li-Ion Battery Electrode/Electrolyte Interface Probing

Dual-Layered Interfacial Evolution of Lithium Metal Anode: SEI Analysis via TOF-SIMS Technology.

Probing Liquid Surfaces under Vacuum Using SEM and ToF-SIMS.

Microfluidic Cell Culture and Metabolism Detection with Electrospray Ionization Quadrupole Time-Of-Flight Mass Spectrometer

Direct Visualization of Chemical Transport in Solid-State Chemical Reactions by Time-of-Flight Secondary Ion Mass Spectrometry

Direct Molecular Evidence of Proton Transfer and Mass Dynamics at the Electrode-Electrolyte Interface.

Recent Advances in Detection of Electrochemical Reaction Intermediates at the Solid-Liquid Interface by Mass Spectrometry