Abstract:Wind-induced vibrations are a common occurrence in nature and have great potential as a viable energy source. Effectively harvesting energy from the structure’s large amplitude response caused by wind-induced vibrations can power microelectronic devices, however, it is still a significant challenge in the field of energy harvesting. In order to efficiently harvest wind-induced vibration energy, this paper proposes a magnetic sliding airfoil flutter energy harvester. A dynamic model of the harvester is established based on a semi-empirical nonlinear aerodynamic model and the electromechanical coupling coefficient related to the position of the magnets. An experimental prototype is created and a wind tunnel test platform is built. In the experiment, by increasing and decreasing the wind speed, two different initial states are provided for the harvester, and two cut-in wind speeds are discovered 5.2 m/s and 8.3 m/s. A sudden jump phenomenon occurs at 8.3 m/s in downward sweeping wind speed experiments. Two jump points and a multi-solution region are found at 6.8 m/s and 8.2 m/s in numerical simulations. The displacement response exhibits a sine waveform, while the output voltage shows a non-sinusoidal waveform with significant even-order harmonics. The simulated plunging displacement and voltage output waveform closely match the experimental waveform, confirming the accuracy of the model. The output root mean square voltage of the energy harvester increases with the increase of resistance, and the average power shows an increasing-then-decreasing trend with resistance. An analysis is conducted on the impact of load resistance on energy harvesting performance. At the wind speed of 8.6 m/s, the average power in the experiment reaches its maximum value of 7.5 mW when the load resistance is close to the coil’s resistance. Overal, this article provides a new design approach for efficient flutter-based energy harvesters, offering a reference for the design of other forms of wind-induced vibration energy harvesters such as galloping-induced and vortex-induced vibration.

A Flapping Airflow Energy Harvester with Flexible Wing Sections

Enhancing Output Power of a Cantilever-Based Flapping Airflow Energy Harvester Using External Mechanical Interventions

Scavenging Wind Energy by a Y-shaped Bi-Stable Energy Harvester with Curved Wings

Scavenging Wind Energy by a Dynamic-Stable Flutter Energy Harvester with Rectangular Wing

Enhancing Energy Harvesting Through Hybrid Bluff Body at a Predefined Angle of Attack Coupling Vortex-Induced Vibration and Galloping

Biomimetic Swallowtail V-Shaped Attachments for Enhanced Low-Speed Wind Energy Harvesting by a Galloping Piezoelectric Energy Harvester

A bio-inspired study on tidal energy extraction with flexible flapping wings

Design and Optimization of a Flapping Water Flow Energy Harvester

A Broadband Zigzag-Shaped Energy Harvester for Both Wind Energy and Vibration Energy: Modeling and Experimental Verification

A magnetic sliding airfoil flutter energy harvester

Enhancing Wind Energy Harvesting Through Two V-Shaped Attachments and Monostable Characteristics in the Galloping Piezoelectric Harvester

Adaptivity of a leaf-inspired wind energy harvester with respect to wind speed and direction

Harvesting Both Wind Energy and Vibration Energy by a Zigzag Structure with Hybrid Magnetic and Piezoelectric Effects

Enhanced magneto-aeroelastic flutter energy harvester (mafeh) design and testing

A Miniature Airflow Energy Harvester From Piezoelectric Materials

Efficiently Harvesting Low-Speed Wind Energy by a Novel Bi-Stable Piezoelectric Energy Harvester from Vortex-Induced Vibration and Galloping

Design and Analysis of the Energy Conversion Device in the Electromagnetic Aeroelastic Energy Harvesting System

Enhanced piezoelectric energy harvesting performance using trailing-edge flap

A hybrid energy harvester inspired by bionic flapping wing structure based on magnetic levitation

Wind energy harvesting inspired by Palm leaf flutter: Observation, mechanism and experiment

A Dragonfly-Wing-like Energy Harvester with Enhanced Magneto-Mechano-electric Coupling