Abstract:Harvesting energy from wind-induced vibration utilizing piezoelectric mechanism has attracted much attention for enabling energy-autonomous wireless sensor systems over the past decade. To offer a promising solution for low reliability, poor environmental adaptability and narrow operating bandwidth of existing piezoelectric wind energy harvesters, a wind-isolated galloping energy harvester with an embedded piezoelectric transducer (EPT-WGEH) is proposed in this paper. Unlike previous most directly-excited piezoelectric wind energy harvesters, the EPT-WGEH was characterized by an indirectly-excited shelter-structure, which isolates the embedded piezoelectric transducer (EPT) from the flow environment. Meanwhile, the horizontal swing of the hollow cylinder and the elastic pendulum beam is transformed into the vertical swing of the EPT mounted in the hollow cylinder under wind excitation. Therefore, this 2-DOF indirectly-excited EPT-WGEH could possess both high reliability and small volume. A CFD simulation model was established to analyze the influence of structural parameters on the vibration characteristics of EPT-WGEH. To verify the feasibility of the principle and design regarding the proposed EPT-WGEH, a prototype of the EPT-WGEH was fabricated and tested in terms of electrical output and operating bandwidth. The results showed that the length of elastic pendulum beam, proof mass, and wind speed brought significant effects on the electrical output, minimum working wind speed and operating bandwidth. The maximal output voltage increased with the decreasing length of elastic pendulum beam or the increasing proof mass. Meanwhile, there existed some optimal combinations of parameters to minimize the minimum working wind speed of EPT-WGEH. Besides, the optimal output power of EPT-WGEH could reach 2.4 mW at load resistance of 600 kΩ. The EPT-WGEH could light up 75 series-connection commercial blue LEDs simultaneously at the wind speed of 15 m/s and demonstrated its practical power supply capability by charging capacitors.

Enhancing Wind Energy Harvesting Through Two V-Shaped Attachments and Monostable Characteristics in the Galloping Piezoelectric Harvester

Biomimetic Swallowtail V-Shaped Attachments for Enhanced Low-Speed Wind Energy Harvesting by a Galloping Piezoelectric Energy Harvester

Efficiently Harvesting Low-Speed Wind Energy by a Novel Bi-Stable Piezoelectric Energy Harvester from Vortex-Induced Vibration and Galloping

Enhancing Energy Harvesting Through Hybrid Bluff Body at a Predefined Angle of Attack Coupling Vortex-Induced Vibration and Galloping

Harvesting Low-Speed Wind Energy by Bistable Snap-Through and Amplified Inertial Force

Harvesting Both Wind Energy and Vibration Energy by a Zigzag Structure with Hybrid Magnetic and Piezoelectric Effects

Scavenging Wind Energy by a Dynamic-Stable Flutter Energy Harvester with Rectangular Wing

A Broadband Zigzag-Shaped Energy Harvester for Both Wind Energy and Vibration Energy: Modeling and Experimental Verification

Scavenging Wind Energy by a Y-shaped Bi-Stable Energy Harvester with Curved Wings

Nonlinear Dynamical and Harvesting Characteristics of Bistable Energy Harvester under Hybrid Base Vibration and Galloping.

Enhancing Piezoelectric Energy Harvesting from the Flow-Induced Vibration of an Apple-Shaped Bluff Body Based on Topology Optimization

Enhancement of low-speed piezoelectric wind energy harvesting by bluff body shapes: Spindle-like and butterfly-like cross-sections

High-performance piezoelectric wind energy harvester with Y-shaped attachments

Piezoelectric Wind Energy Harvesting Subjected to the Conjunction of Vortex-Induced Vibration and Galloping: Comprehensive Parametric Study and Optimization

Harvesting Vibration Energy and Wind Energy by a Bi-stable Harvester: Modeling and Experiments

A wind-direction adaptive piezoelectric energy harvester employing small wing passive control configuration

Low-Wind-Speed Galloping Wind Energy Harvester Based on a W-Shaped Bluff Body

An Innovative V-shaped Piezoelectric Energy Harvester for Wind Energy Based on the Fully Fluid-Solid-electric Coupling

Design, fabrication and characterization of a wind-isolated galloping energy harvester via an embedded piezoelectric transducer

Galloping Piezoelectric Energy Harvester for Low Wind Speed

A Dual-Beam Coupled System for Hybrid Galloping and Vortex-Induced Vibration Energy Harvesting