Abstract:This study examines the performance of three heat pump dryers: the original reference design, a modified drying chamber, and an external desiccant wheel design. Unlike most existing studies that normally adopt organic products as the drying materials, in this study we used moist sodium polyacrylate (Orbeez) as the drying material for consistent characterization of the heat pump performance. R-134a was adopted as the refrigerant for the heat pump system. The experiments were performed subject to different weights of Orbeez (drying material) at a constant volumetric flow rate of 100 m3/h. During experimentation, different parameters like the coefficient of performance (COPHP), drying rate, heat transfer rate by the condenser, moisture extraction rate, and specific moisture extraction rate were calculated. The average COPHP, mass transfer rate, heat transfer rate, MER, and SMER of the system were calculated as 3.9, 0.30 kg/s, 0.56 kW, 0.495 kg/h, and 1.614 kg/kWh, respectively. The maximum COP for the refrigeration system was achieved at lower test loads with the desiccant wheel. The moisture extraction rate for a lower test loading was higher than that for a higher test load due to the higher penetration of drying air at the lower test load, although the maximum test load showed the maximum relative humidity at the dryer outlet. The desiccant wheel showed good performance in terms of moisture extraction rate and COPHP, but it showed poor performance in terms of the specific moisture extraction rate due to the high power consumption (around 2.6 kW) of the desiccant dehumidifier. The moisture extraction rate (MER) for all designs increased to a maximum value, followed by consistent decline. However, the maximum MER for the desiccant design exceeded those for the other designs.

Experimental Studies On Performance Of Three Rotary Dehumidifiers Fabricated With Corrugated Honey-Comb Paper Coated With Different Desiccant Materials

Experimental Investigation on Dynamic Dehumidification Performance of Rotary Desiccant Weels

Experimental Comparison of Two Honeycombed Desiccant Wheels Fabricated with Silica Gel and Composite Desiccant Material

Dynamic Hygroscopic Effect of the Composite Material Used in Desiccant Rotary Wheel

Experimental Study on Composite Desiccant Wheel and Its Application in a Desiccant Cooling System

A Simulation Study of Heat and Mass Transfer in A Honeycombed Rotary Desiccant Dehumidifier

Experimental Study on Desiccant-Wheel Dehumidification Performance

Experimental evaluation of the dehumidification performance of a metal organic framework desiccant wheel

An Experimental Study on the Dehumidification Performance of a Counter Flow Liquid Desiccant Dehumidifier

Experimental investigations on desiccant wheels

Investigation on the Feasibility of Using Wood Pulp Fiber Paper As Substrate of Rotary Desiccant Wheel for Dehumidification.

Experimental Investigation of the Dehumidification Performance of a Metal-Organic Framework MIL-101(Cr)/ Ceramic Fibre Paper for Use As a Desiccant Wheel

Experimental Study on the Performance of an Improved Dehumidification System Integrated with Precooling and Recirculated Regenerative Rotary Desiccant Wheel

Experimental testing on contaminant and moisture removal performance of silica gel desiccant wheel

Performance analysis of a rotary desiccant wheel using polymer material with high water uptake and low regeneration temperature

Investigation on Recirculated Regenerative Solid Desiccant-Assisted Dehumidification System: Impact of System Configurations and Desiccant Materials

Performance Optimization of Silica Gel-Lithium Chloride Composite Desiccant Dehumidification Wheel

Enhanced Water Sorption Performance of Polyacrylamide & Glass Fiber Paper Composites: Investigation and Comparison of Application in Desiccant Wheels

Experimental Investigation and Effectiveness Analysis of a Desiccant Wheel Dehumidification System with Low Air Humidity

Use of compound desiccant to develop high performance desiccant cooling system

Experimental Analysis of a Heat Pump Dryer with an External Desiccant Wheel Dryer