Performance analysis of a rotary desiccant wheel using polymer material with high water uptake and low regeneration temperature
Yanan Xue,Qian Li,Ruzhu Wang,Tianshu Ge
DOI: https://doi.org/10.1016/j.ijrefrig.2023.12.003
IF: 4.14
2023-12-06
International Journal of Refrigeration
Abstract:Desiccant wheels have been widely used in humidity control, particularly under conditions with ultra-low dew point temperatures. However, traditional desiccants such as silica gel and zeolites are subject to relatively low adsorption capacity and high regeneration temperature. To address these challenges, a type of polymer material with high water uptake and low regeneration temperature is investigated in this paper. Firstly, the adsorption/desorption capacity of this polymer is thoroughly tested. Results reveal that its remarkable equilibrium adsorption capacity and desorption rate coefficients k LDF,de are 350% and 32%-64% higher than that of silica gel, respectively. Moreover, its required regeneration temperature is just about 40°C-70°C. The performance of the desiccant wheel using this polymer is simulated by a model validated by experiments tests. Parameter analysis demonstrates that the desiccant wheel is suitable for cool and humid conditions, reaching the maximum moisture removal (∆ Y ) and dehumidification coefficient of performance (DCOP) of 4.0g kg −1 and 0.66, respectively. Furthermore, the corresponding relationship between other parameters and the optimal rotation speed is discussed in detail. The ω opt is around 18rph, enabling the attainment of the highest ∆ Y . Finally, the performance comparison with a traditional silica gel desiccant wheel is carried out. The results indicate that the polymer one performs 17%-53.9% higher in terms of both ∆ Y and DCOP than the silica gel counterpart. And the most significant improvement is observed in low relative humidity conditions (45%RH), where ∆ Y and DCOP are 1.25-1.53 times that of the silica gel's, highlighting the advantageous utilization of the polymer material.
engineering, mechanical,thermodynamics