Abstract:The goal of this paper is to describe an active decentralized fault-tolerant control (ADFTC) strategy based on dynamic output feedback for reconfigurable manipulators with concurrent actuator and sensor failures. Consider each joint module of the reconfigurable manipulator as a subsystem, and treat the fault as the unknown input of the subsystem. Firstly, by virtue of linear matrix inequality (LMI) technique, the decentralized proportional-integral observer (DPIO) is designed to estimate and compensate the sensor fault online; hereafter, the compensated system model could be derived. Then, the actuator fault is estimated similarly by another DPIO using LMI as well, and the sufficient condition of the existence of H∞ fault-tolerant controller in the dynamic output feedback is presented for the compensated system model. Furthermore, the dynamic output feedback controller is presented based on the estimation of actuator fault to realize active fault-tolerant control. Finally, two 3-DOF reconfigurable manipulators with different configurations are employed to verify the effectiveness of the proposed scheme in simulation. The main advantages of the proposed scheme lie in that it can handle the concurrent faults act on the actuator and sensor on the same joint module, as well as there is no requirement of fault detection and isolation process; moreover, it is more feasible to the modularity of the reconfigurable manipulator.

Decentralized Active Fault Tolerant Control for Modular and Reconfigurable Robot with Torque Sensor

Decentralized Fault Tolerant Control for Modular Robot Manipulators Via Integral Terminal Sliding Mode and Disturbance Observer

Adaptive Sliding Mode Decentralized Control for Modular and Reconfigurable Robots with Torque Sensor

Robust Decentralized Force/Position Fault-Tolerant Control for Constrained Reconfigurable Manipulators Without Torque Sensing

Sensor Fault Identification and Decentralized Fault-Tolerant Control of Reconfigurable Manipulator Based on Sliding Mode Observer

Decentralized Trajectory Tracking Control for Modular and Reconfigurable Robots with Torque Sensor: Adaptive Terminal Sliding Control-Based Approach

Decentralized fault-tolerant control of modular robot manipulators with actuator saturation: neural adaptive integral terminal sliding mode-based control approach

Decentralized fault tolerant control for reconfigurable modular robots

Decentralized Force/Position Fault-Tolerant Control For Constrained Reconfigurable Manipulators With Actuator Faults

Distributed Fault-Tolerant Control of Modular and Reconfigurable Robots with Consideration of Actuator Saturation

Active substituting decentralized fault-tolerant control for reconfigurable manipulators with multi-sensor failures

Decentralized Sliding Mode Observer Based Dual Closed-Loop Fault Tolerant Control for Reconfigurable Manipulator against Actuator Failure

Reconfigurable Tolerant Control of Uncertain Mechanical Systems With Actuator Faults: A Sliding Mode Observer-Based Approach

Adaptive Fault-Tolerant Control of a Quadrotor Helicopter Based on Sliding Mode Control and Radial Basis Function Neural Network

Dynamic Output Feedback Based Active Decentralized Fault-Tolerant Control for Reconfigurable Manipulator with Concurrent Failures

Active Fault-Tolerant Control Integrated with Reinforcement Learning Application to Robotic Manipulator

Multisensor Fault Identification Scheme Based on Decentralized Sliding Mode Observers Applied to Reconfigurable Manipulators

Local Joint Information Based Active Fault Tolerant Control for Reconfigurable Manipulator

Module System Monitoring and Fault Detection for Modular and Reconfigurable Robot

Multiple Faults Detection and Isolation Via Decentralized Sliding Mode Observer for Reconfigurable Manipulator

Fault-tolerant Control of a 2-DOF Robot Manipulator Using Multi-Sensor Switching Strategy