Abstract:Large deformation of sand due to soil liquefaction is a major cause for seismic damage. In this study, the mechanisms and modeling of large post-liquefaction deformation of sand considering the significant influence of water absorption in shearing and seismic wave conditions. Assessment of case histories from past earthquakes and review of existing studies highlight the importance of the two factors. Based on the micro and macro scale mechanisms for post-liquefaction shear deformation, the mechanism for water absorption in shearing after initial liquefaction is revealed. This is aided by novel designed constant water-absorption-rate shear tests. Water absorption in shearing can be classified into three types, including partial water absorption, complete water absorption, and compulsory water absorption. Under the influence of water absorption in shearing, even a strongly dilative sand under naturally drained conditions could experience instability and large shear deformation. The mechanism for amplification of post-liquefaction deformation under surface wave load is also explained via element tests and theoretical analysis. This shows that surface wave–shear wave coupling can induce asymmetrical force and resistance in sand, resulting in asymmetrical accumulation of deformation, which is amplified by liquefaction. A constitutive model, referred to as CycLiq, is formulated to capture the large deformation of sand considering water absorption in shearing and seismic wave conditions, along with its numerical implementation algorithm. The model is comprehensively calibrated based on various types of element tests and validated against centrifuge shaking table tests in the liquefaction experiments and analysis projects (LEAP). The model, along with various numerical analysis methods, is adopted in the successful simulation of water absorption in shearing and Rayleigh wave-shear wave coupling induced large liquefaction deformation. Furthermore, the model is applied to high-performance simulation for large-scale soil-structure interaction in liquefiable ground, including underground structures, dams, quay walls, and offshore wind turbines.

Re-liquefaction of Sand in Shaking Table

Factors Influencing Sand Re-liquefaction in Shaking Table Test

Reliquefaction resistance of Solani sand subjected to repeated excitations using shaking table experiments

Reliquefaction behavior of sand and response of pile group subjected to repeated shaking sequence using centrifuge model experiments

Development of a Large Shaking Table Test for Sand Liquefaction Analysis

Experimental studies on dynamic and static properties of sand during repeated liquefaction events

Repeated liquefaction and consolidation of sand: Tests and numerical simulation considering finite deformation

Shaking-table tests on the stiffness recovery process of liquefied sandy ground

Experiment and Numerical Simulation of Repeated Liquefaction-Consolidation of Sand

Seismic behavior of irregular underground structures in saturated sand

Numerical Modelling of Liquefaction in Loose Sand Deposits Subjected to Ocean Waves

A pneumatic shaking table and its application to a liquefaction test on saturated sand

Centrifuge Test Of Dry Sand And Saturated Sand Ground Seismic Response Under Earthquake Sequence

Experimental Investigation on Fluid Characteristics of Medium Dense Saturated Fine Sand in Pre- and Post-Liquefaction

Large Post-Liquefaction Deformation of Sand: Mechanisms and Modeling Considering Water Absorption in Shearing and Seismic Wave Conditions

Liquefaction resistance of sand-gravel soils using small soil-box shaking table tests

Shaking table test on shaft-tunnel junction in liquefiable sand site

Influence of Liquefaction History on Liquefaction Susceptibility

Excess Pore Pressure Dissipation and Solidification after Liquefaction of Saturated Sand Deposits

Liquefaction and Displacement of Saturated Sand under Vertical Vibration Loading

Time-Dependent Cone Penetration Resistance of a Postliquefaction Sand Deposit at Shallow Depth