Abstract:Comparison of the influences of the preparation methods and reaction conditions to the properties of SnO2 powder, especially the specific surface area and the stability under high temperature calcination were performed. SnO2 prepared by precipitation method using NaOH solutions as the precipitating agent in the pH region of 10 and aged at 100 degreesC for 48 h had the highest BET surface area of 93.5 m(2) . g(-1) after calcination at 500 degreesC for 4 h. The materials maintained a surface area of 75.2 m(2) . g(-1) after 800 degreesC and 53.2 m(2) . g(-1) after 1000 degreesC calcination. The sample using NH3 . H2O as precipitation agent had the lowest BET surface area calcinied under the above three temperatures. It was shown that using NaOH as precipitation agent and digestion at high temperature was beneficial to maintain high surface area and good stability under high temperature. One of the reasons is that the digestion under high temperature reduced the water content in the hydrous tin oxide gel, so the initial structure of the particle was enhanced during the drying and calcining process. The other reason is that the crystallization of the initial particles was enhanced during the digestion and the defect on the surface was reduced also, so the sintering due to the surface diffusion was restrained. Further more, washing with ethanol reduced the formation of hardcore agglomeration between the particles, thus improved the stability of the particles under high temperature calcining process.

Preparation Of Nano-Sized Tin Oxide By Polyacrylamide Gel Method

Preparation of Nanosized Tin Oxide Powders by Polymer Network Method

Preparation of Nanocrystalline Tin Dioxide Particles via the Acrylamide Polymerization Process

Synthesis And Characterization Of Nanometer Sno2 By Non-Hydrolytic Sol-Gel Approach

Preparation of Nano-Size SnO2 with Non-Water Solvent by Sol-Gel

Synthesis and Characterization of Nanocrystalline Tin Oxide by Sol–gel Method

Preparation of Nanometer-sized SnO2 with Colloid-Hydrothermal Process

Synthesis of Nanocrystalline SnO2 Powders with Oxidation of Granulated Tin-hydrothermal Method

Preparation of Tin Dioxide Powder with High Specific Surface Area and Stability at High Temperature

The Preparation Technology of SnO<sub>2</sub> Nanowires Based on the System of Al-SnO-Cu<sub>2</sub>O

Preparation of SnO2 Nanoparticles by Homogeneous Precipitation Method

Preparation of Nanometer-Sized Sno2 by the Fusion Method

Tin oxide nanocrystal synthesized by mechanochemical method

Novel Synthesis of Well-Dispersed Crystalline SnO2 Nanoparticles by Water-in-oil Microemulsion-Assisted Hydrothermal Process.

The synthesis and properties of nano-SnO2 thin film by sol-gel

Hydrothermal synthesis of nanosized SnO2

Preparation of Nanosized SnO2 by Liquid-Phase Direct Precipitation Method

Expeditious Synthesis of SnO2 Nanoparticles Through Controlled Hydrolysis and Condensation of Tin Alkoxide in Reverse Microemulsion

Preparation and Characterization of SnO_2 Nanoparticles

Preparation of Tin Oxide Nanoparticles Using A Sol-Gel Process Based on Tin Dichloride and Absolute Ethanol

Facile Synthesis of Nanocrystal Tin Oxide Hollow Microspheres by Microwave-Assisted Spray Pyrolysis Method