Abstract:Phase change phenomena in microchannels have been projected as an effective option for thermal management of various microscale systems. However, for the design of heat sinks which utilize these phenomena, a clear understanding of the physical mechanisms involved, in the microscale domain, is required. In the present study, a numerical simulation is carried out to predict the characteristics of two phase flow with liquid to vapor phase change, in rectangular microchannels for a range of hydraulic diameters. The annular flow pattern, reported to be the most common in microchannel, has been investigated, with water as the flowing medium. The analysis considers, among other parameters, the effect of surface tension on the flow dynamics, which could be significant in microchannels. The mathematical model is numerically solved using a quasi-three dimensional approach, incorporating the variations in the cross-sectional areas of both the phases along the flow direction. Since it is expected that the continuum approximation may be insufficient in the vapor domain in channels of very small dimensions, an analysis incorporating slip flow at the liquid vapor interface analysis has been performed, where the channel dimensions produce Knudsen number values in the range 0.001–0.1, as suggested in the literature. The liquid film thickness along the flow direction is determined utilizing mass conservation, and the velocity distributions at different locations along the flow direction are obtained by solving the governing differential equations numerically. The two phase pressure drop is calculated for cases demanding slip and no slip conditions. A comparison has been made of the fluid flow characteristics, between the slip and no slip cases for the cases where slip flow is expected. The effects of the imposed heat flux, volume flow rate and channel geometry on the velocity distribution and pressure drop are examined. The predicted pressure drop values are found to increase with increasing heat flux, and decrease with an increase in the flow rate and the channel height. The two phase heat transfer coefficient and the wall temperature of the channel are also determined. The two phase heat transfer coefficient is found to increase with an increase in the vapor quality. It is also noticed that the wall temperature decreases along the length of the channel and the wall temperature at the exit of the channel decreases with decrease in volume flow rate, within the range of parameters used, which is in accordance with observations reported in the literature. The results are found to be in good agreement with the experimental and theoretical results available in the literature.

NUMERICAL STUDY OF GAS-LIQUID TWO-PHASE FLOW IN ULTRA-HIGH-ASPECT-RATIO MICROCHANNEL WITH CAPILLARY-STRUCTURED WALL

Heat Transfer Characteristics and Field Synergy Analysis of Gas–liquid Two-Phase Flow in Micro-Channels

Numerical Analysis On Flow Characteristics Of Anti-Gravity Flow

On Numerical Simulation Techniques of Stable Crack Growth

Numerical simulation and experimental investigation of gas-liquid two-phase flow in a complex microchannel

Study of two-phase flow characteristics in the interrupted microchannels

Experimental and Numerical Analysis on Heat Transfer Performance of Slug Flow in Rectangular Microchannel

Experimental and Numerical Studies of Fluid Flow Confined in Microchannel

Molecular dynamics study of spontaneous capillary flow and heat transfer in nanochannels

3D Numerical Investigation on Flow Boiling Characteristics in Large Length-to-diameter Ratio Microchannel

Experimental and Numerical Study of Flow Boiling Heat Transfer Characteristics in Rectangular Groove-Wall Microchannels

A modeling approach for capillary-driven flow of a wetting fluid in a rectangular open microchannel of arbitrary axisymmetric width profile: Application to heat pipes

5024 Numerical Computation of the Fluid Flow in a Micro Channel

Study on Liquid-Liquid Two-Phase Flow Patterns in a T-Shaped Microchannel

Computational Study and Optimization of Laminar Heat Transfer and Pressure Loss of Double-Layer Microchannels for Chip Liquid Cooling

Experimental Study Of Saturated Flow Boiling In Vertical Narrow Microchannel

Experimental and numerical studies of liquid-liquid two-phase flows in microchannel with sudden expansion/contraction cavities

Study on Flow Characteristics of Working Medium in Microchannel Simulated by Porous Media Model

Influence of aspect ratio on void fraction of gas-liquid two-phase flow in microchannels

Numerical simulation of boiling behavior in vertical microchannels

An experimental investigation of adiabatic two-phase flow patterns in a slit microchannel with 1:800 aspect ratio