Abstract:Battery thermal management is critical in achieving performance and the extended life of batteries in electric and hybrid vehicles under real-driving conditions. Appropriate modeling for predicting thermal behavior of battery systems in vehicles helps to make decisions for improved design and shortens the development process. For this paper, we looked at the impact of cooling strategies with air and direct/indirect liquid cooling. The simplicity of an air-cooling system is an advantage over a liquid-cooling system. In addition to its intrinsically lower heat transfer coefficient, another disadvantage of air cooling is that the small heat capacity of air makes it difficult to accomplish temperature uniformity inside a cell or between cells in a module. Liquid-cooling is more effective in heat transfer and takes up less volume, but the added complexity and cost may outweigh the merits. The surface heat transfer coefficient, h, and the blower power for air cooling are sensitive to the hydraulic diameter of the cooling channel (Dh). However, because of the added thermal resistances, h evaluated at cell surface is not as sensitive to the variation of Dh in an indirect (water/glycol jacket) cooling system. Due to the high heat transfer coefficient at small Dh, direct liquid cooling using dielectric mineral oils may be preferred in spite of high pressure loss in certain circumstances such as in highly transient large heat generating battery systems. In general, air-cooling should be considered first, as the power demand increases with heavier vehicles and more aggressive driving, water/glycol jacket cooling should be considered next. Results of computational fluid dynamics model simulation imply that capturing the internal heat flow paths and thermal resistances inside a cell using a sophisticated three-dimensional cell model is important for more accurate prediction of cell/battery thermal behaviors. This paper identified analyses and approaches that engineers should consider when they design a battery thermal management system for vehicles.

Design and Simulation of Liquid Cooled System for Power Battery of PHEV

An Intelligent Thermal Management System for Optimized Lithium-Ion Battery Pack

Heating Strategy for Electric Vehicular Battery Pack Based on CFD Analysis

Theoretical and Experimental Investigations on Liquid Immersion Cooling Battery Packs for Electric Vehicles Based on Analysis of Battery Heat Generation Characteristics

EVS 28 KINTEX , Korea , May 3-6 , 2015 Design and Simulation of Liquid-cooling Plates for Thermal Management of EV Batteries

Liquid Cooling/heating-Based Battery Thermal Management

Simulation and Analysis of Lithium-Ion Battery Thermal Management System Based on Wavy Liquid Cooling Channel

Research on Structural Design and Optimization of Battery Thermal Management System

Thermal management system model combining of cooling and heat preservation for power batteries

Development and Analysis of a New Cylindrical Lithium-Ion Battery Thermal Management System

Numerical Analysis on Thermal Management Performance of Lithium-Ion Battery Pack with Liquid Cooling

Experimental and Simulation Research on Heat Pipe Thermal Management System Coupled with Battery Thermo-Electric Model

Investigation of the Liquid Cooling and Heating of a Lithium-Ion Battery Package for an Electric Vehicle

An Analysis of Li-ion Traction Battery System Thermal Simulation Based on Simplified Pipeline Fluid Model and Liquid Cooling Enhancement

Optimization of the Heat Dissipation Performance of a Lithium-Ion Battery Thermal Management System with CPCM/Liquid Cooling

Experiments and Simulation on the Performance of a Liquid-Cooling Thermal Management System including Composite Silica Gel and Mini-Channel Cold Plates for a Battery Module

Simulation of Temperature Field of Lithium Battery Pack Based on Computational Fluid Dynamics

The Design and Investigation of a Cooling System for a High Power Ni-MH Battery Pack in Hybrid Electric Vehicles

Design and Optimization of a Liquid Cooling Thermal Management System with Flow Distributors and Spiral Channel Cooling Plates for Lithium-Ion Batteries

Battery Thermal Management Design Modeling

Experimental and numerical simulation study on the integrated thermal management system for electric vehicles