Abstract:Thermoelectric generator (TEG) with improved performance is a promising technology in power supply and energy harvesting. Existing studies primarily adopt constant material properties to investigate TEG performance. However, thermoelectric (TE) material properties are subjected to considerable variations with temperature. Thus, reasonable doubts have risen concerning the influence level of temperature-dependent material properties on TEG performance. To solve this problem, an efficient and a comprehensive one-dimensional numerical model is developed to fully consider the third-order polynomial temperature-dependent thermal conductivity, Seebeck coefficient, and electrical resistivity. Control volume and finite difference algorithms are compared, and experiments are conducted to verify the developed numerical model. The temperature distribution along the TE leg obviously differs from the parabolic shape, which is a classic temperature distribution under the assumption of constant material properties. Insights find that the local change rate of thermal conductivity and Thomson effect are the essential reasons for the abovementioned phenomenon. It has been found that Thomson heat is released in the part of the leg near the cold-end, whereas it is absorbed in the remaining parts of the leg near the hot-end. The electric power on the basis of constant material properties is confirmed to be accurate enough by the developed numerical model, but the parabolic shape of the TE efficiency can be only obtained when temperature-dependent material properties are considered. Furthermore, it is wise to improve the TE efficiency by structural optimization. The present work provides an efficient and a comprehensive one-dimensional numerical model to include temperature-dependent material properties. New insights into the temperature and heat flux distribution, Thomson influence, and structural optimization potential are also presented for the in-depth understanding of the TE conversion process.

Thomson/Joule Power Compensation and the Measurement of the Thomson Coefficient

The Elusive Thomson Effect in Thermoelectric Devices. Experimental Investigation from 363 K to 213 K on Various Peltier Modules

Temperature profile of the Thomson-effect-induced heat release/absorption in junctionless single conductors

Special Important Aspects of the Thomson Effect

Thomson effect and nonlinear performance of thermoelectric generator

Discrepancy between Constant Properties Model and Temperature-Dependent Material Properties for Performance Estimation of Thermoelectric Generators

Precise measurement of absolute Seebeck coefficient from Thomson effect using ac-dc technique

Numerical analysis of thermoelectric power generation coupled with temperature-dependent material properties

A Model for Material Metrics in Thermoelectric Thomson Coolers

A Model to Evaluate the Device-Level Performance of Thermoelectric Cooler with Thomson Effect Considered

A Comprehensive Analysis of Delamination and Thermoelectric Performance of Thermoelectric Pn-Junctions with Temperature-Dependent Material Properties

A Physical Model for Thermoelectric Generators With and Without Thomson Heat

On a Possibility to Measure Thermoelectric Power in SNS Structures

Theoretical investigation on the influence of Seebeck and Thomson effects in a thermoelectric generator

Phase-transition-induced giant Thomson effect for thermoelectric cooling

Measurement and Analysis for Performance of Micro-thermoelectric Generator

Thermodynamic Analysis of TEG-TEC Device Including Influence of Thomson Effect

Improved Thermoelectric Cooling Based on the Thomson Effect

A Self-Heating 2ω Method for Seebeck Coefficient Measurement of Thermoelectric Materials.

Enhancing the cooling performance of thermocouples: a power-constrained topology optimization procedure

Effective thermal conductivity in thermoelectric materials