Abstract:Iron-based fluorides, a kind of intercalation–conversion cathode material, are considered as one of the most promising candidate cathode materials for lithium-ion batteries due to their high capacity and cheap cost. Nevertheless, poor electrical conductivity and sluggish reaction kinetics upon cycling impede their practical application. Herein, Ni-doped FeF3·0.33H2O has been put forward and fabricated by a simple solvothermal method to overcome the above deficiency. The impact of Ni doping on the physical and electrochemical performances has been studied by first-principles calculations combined with comprehensive physicochemical characterizations. The results reveal that appropriate substitution of Fe sites by Ni can result in F vacancies without changing the intrinsic crystal structure, but it not only reduces the band gap and improves its intrinsic conductivity but also broadens the ion channel, thus facilitating the rapid transport of ions and electrons to acquire excellent electrochemical properties. Compared with the bare FeF3·0.33H2O, the appropriate amount (8%) of Ni2+ doping exhibits higher reversible capacity, longer cyclic stability, and better rate capability. It presents a 412 mAh g–1 initial discharge capacity and remains 264 mAh g–1 after 100 cycles at 0.25 C (1 C = 200 mA g–1) within a range of 1.5–4.5 V. Additionally, at 2.0 C, it still delivers a high discharge capacity of 248 mAh g–1. The excellent electrochemical performance is ascribed to the improvement of electronic conductivity and reaction kinetics caused by the moderate Ni doping.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c05258?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c05258</a>.Long-term stability, SEM figure, and mole ratios (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c05258/suppl_file/sc0c05258_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Cr-Doped Fe1–xCrxF3·0.33H2O Nanomaterials As Cathode Materials for Sodium-Ion Batteries

Cr-Doped Fe 1– x Cr x F 3 ·0.33H 2 O Nanomaterials as Cathode Materials for Sodium-Ion Batteries

Activating the Inert Na1 Sites in Na<sub>2</sub>FePO<sub>4</sub>F Toward High Performance Sodium Storage

Effect of Cr3+ doping on the electrochemical performance of Na3V2(PO4)2F3/C cathode materials for sodium ion battery

Heterovalent Chromium-Doped Na<sub>3</sub>Fe<sub>2</sub>(PO<sub>4</sub>)P<sub>2</sub>O<sub>7</sub> Cathode Material with Superior Rate and Stability Performance for Sodium-Ion Storage

Zero-strain Co-doped Na2FeP2O7/carbon Delivers Superior Rate Capability and Long-Cycle Stability for Sodium Ion Batteries

Chromium Doped NASICON-structured Na3MnTi(PO4)3/C Cathode for High-Performance Sodium-Ion Batteries

Construction of superior performance Na3V2-xCrx(PO4)2F3/C cathode by homovalent doping strategy toward enhanced sodium ion storage

Vanadium substituted Fe, Cr co-doped high performance C/Na3V2(PO4)2F3 cathode for sodium-ion batteries

Exploration of Cr0.2Fe0.8Nb11O29 As an Advanced Anode Material for Lithium-Ion Batteries of Electric Vehicles

Band-Gap Engineering of FeF 3 ·0.33H 2 O Nanosphere via Ni Doping as a High-Performance Lithium-Ion Battery Cathode

Co-precipitation synthesis and performance of multi-doped LiCr x Ni x Mn 2-2x O 4-z F z cathode materials for lithium ion batteries

A Multielectron-Reaction and Low-Strain Na 3.5 Fe 0.5 VCr 0.5 (PO 4 ) 3 Cathode for Na-Ion Batteries

Sodium-deficient O3-type Na0.83Cr1/3Fe1/3Mn1/6Ti1/6O2 As a New Cathode Material for Na-ion Batteries

Layer-structured Ti Doped O3-Na1−xCr1−xTixO2(x=0, 0.03, 0.05) with Excellent Electrochemical Performance As Cathode Materials for Sodium Ion Batteries

Unlocking Fast and Highly Reversible Sodium Storage in Fe-Based Mixed Polyanion Cathodes for Low-Cost and High-Performance Sodium-Ion Batteries

F-doped O3-NaNi1/3Fe1/3Mn1/3O2 as high-performance cathode materials for sodium-ion batteries

Cu-Doped Spherical P2-Type Na0.7Fe0.23-xCuxMn0.77O2 Cathode for High-Performance Sodium-Ion Batteries.

Synthesis And Characterization Of Li(Li0.2mn0.4fe0.2m0.2)O-2 (M=Co, Ni, Cr, Al) Cathode Materials For Li-Ion Batteries

Enhanced Electrochemical Performance of F-doped Li1.2Mn4/6Ni1/6Co1/6O2.35 Cathode Materials for Li-ion Batteries

The effect of chromium substitution on improving electrochemical performance of low-cost Fe-Mn based Li-rich layered oxide as cathode material for lithium-ion batteries