Abstract:Misalignment between primary and secondary coils in inductive power transfer systems decreases power capacity and efficiency. In this article, a secondary coil positioning method integrated with an orthogonal decoupled transformer is proposed. This nested rectangular and solenoidal structure consists of a pair of double-D coils and a pair of solenoidal coils. The coils are integrated spatially and decoupled magnetically. Based on their directional selectivity characteristics, a coil positioning method is proposed prior to the power path activation. Coordinates can be obtained with polynomial fit calculations. The positioning method is compatible with power transfer and has merits of less auxiliary equipment, higher compatibility, and higher positioning precision considering both horizontal and vertical misalignment cases. The transformer performance is simulated with a three-dimensional finite element modeling tool and verified experimentally on a 3.2-kW prototype. In the preactivation sensing process, points distributed throughout a ±180 mm × 180 mm positioning range were tested. Experimental results show that 92% of tested points are accurate to within 10 mm given a 210 mm vertical distance. When air gap variations are taken into consideration, 90% of tested points are accurate to within 12 mm over the tested range. In the power transfer stage, the maximum full-power dc–dc system efficiency is 94.6%.

A Three-Stage-Five-Coil IPT System Based on Cylindrical Solenoid Coupler Applied to State Detection Equipment of HV Device

A Hybrid IPT System Implementing Misalignment Tolerance and Constant Current Output with Primary Intermediate Coil

Analysis, Design, and Implementation of a Spatially Nested Magnetic Integration Method for Inductive Power Transfer Systems

Analysis and Design of an IPT System Based on Shunt Inductor Compensation for Battery Charging Applications.

Design of an Inductive Power Transfer System with Constant Current and Constant Voltage Outputs Based on Multi-frequency Circuit

An Inductive Power Transfer System Design with Large Misalignment Tolerance for EV Charging.

A Coil Positioning Method Integrated with an Orthogonal Decoupled Transformer for Inductive Power Transfer Systems

Tuning Method Based T-model for LCC/S Compensated IPT System with Constant Current Output Characteristics

All-Detuned Three-Coil Configuration for Advantages in Inductive Power Transfer Systems

Multiple Coils IPT System Implementing CV Output Characteristics with Improved Misalignment Tolerance

A Novel Loosely Coupled Transformers with High Misalignment Tolerance

A Gyrator-Based Converting-Splitting Method of Designing Inductive Power Transfer Systems with Constant Current and Constant Voltage Charging

Analysis and Design of Discrete Ferrite Rings to Improve the Efficiency of Meter-Range Wireless Gap Inductive Power Transfer System

Novel IPT system for enhanced efficiency and anti-misalignment capability

Research on a Three-Coil Hybrid IPT Charger with Improved Tolerance to Coupling Variation and Load-Independent Output

An Intermediate-Coil and Ferrite-Based Coupling Structure With Load-Independent Constant Outputs for Inductive Power Transfer

Analysis and Design of Three-Coil Coupler for Inductive Power Transfer System With Automatic Seamless CC-to-CV Charging Capability

Design of Constant-Voltage and Constant-Current Output Modes of Double-Sided LCC Inductive Power Transfer System for Variable Coupling Conditions

A Hybrid Three-Coil IPT Topology with High Tolerance to Pad Misalignment for Battery Charging Applications

Concentric-coil Hybrid IPT System with Improved Tolerance to Coupling and Load Variations

Analysis and Design of Cubic Magnetic Coupler for High Distance-to-Diameter Ratio IPT Systems