Abstract:Tool wear and breakage is one of the biggest obstacles for developing the unattended CNC machining. Especially when cutting the difficult-to-machining materials, the tool wear will be more rapid and the tool breakage becomes more frequent, which makes an effective tool wear and breakage monitoring very urgent. In the paper, a physical model-based tool wear and breakage monitoring method is proposed. Firstly, a physical model of milling force with the influence of cutter runout and tool wear is established. The spindle box vibration and cutting torque of spindle drive system induced by milling force have been clarified theoretically. Then, through the measurements of milling force, spindle box vibration and driving current, a tool wear monitoring method by extracting the comprehensive feature from the seven-channel specific cutting force coefficients (SCFCs) has been presented. In the method, a multi-parameter decoupling identification procedure for the cutter runout, tooth wear loss and respective SCFCs has been clarified. The force homogenization effect of multi-tooth with tool wear is found. Moreover, an efficient tool breakage monitoring method is further put forward, which incorporates the amplitude ratios of multi-channel data to form an indicator for judging the occurrence of tool damage. The generation mechanism of the sudden distortion on signal waveform resulting from tool breakage is also explained. Finally, long-time milling experiments with multiple groups of machining parameters have been carried out on the general and heavy-cutting machine tools to verify the validity of the proposed method. The verification results indicate that the tool wear and breakage monitoring method can well estimate the cutting status of cutter. The study can provide a useful research basis for the potential industrial application of tool wear and breakage monitoring technology.

Wear and Breakage Detection of Integral Spiral End Milling Cutters Based on Machine Vision

A Machine Vision Method for Non-Contact Tool Wear Inspection

Study of Tool Wear Monitoring Using Machine Vision

Study on In-Situ Tool Wear Detection during Micro End Milling Based on Machine Vision

A Machine Vision System for Micro-Milling Tool Condition Monitoring

Cutting Tool Wear Detection and Tool Management Using Visual Sensors

Online Measurement of Machining Tool Wear Based on Machine Vision

An In-Situ Tool Wear Measurement Method Based on Super-pixels and Enhanced Corner Detection Algorithm

Accurate tool wear and breakage monitoring method for milling process based on vision and laser sensor fusion

Using the Machine Vision Method to Develop an On-machine Insert Condition Monitoring System for Computer Numerical Control Turning Machine Tools

Time-frequency-analysis-based minor cutting edge fracture detection during end milling

Tool Wear Monitoring in Milling Based on Fine-Grained Image Classification of Machined Surface Images

On-machine detection of face milling cutter damage based on machine vision

Physical model-based tool wear and breakage monitoring in milling process

A model approach for in-process tool condition monitoring in CNC turning using machine vision

Tool-Wear-Estimation System in Milling Using Multi-View CNN Based on Reflected Infrared Images

Online tool wear monitoring by super-resolution based machine vision

The Monitoring of Micro Milling Tool Wear Conditions by Wear Area Estimation

Machining Tool Wear Detection and Measurement Based on Edge Extraction and Sub-pixel Fitting

Online tool-wear measurement of small-diameter end mills based on machine vision

A machine vision system for tool wear assessment