Sarat Chandra Mohapatra,Iuri Baldaconi da Silva Bispo,Yuchan Guo,C. Guedes Soares
Abstract:A three-dimensional mathematical hydrodynamic model associated with surface wave radiation by a floating rectangular box-type structure due to heave, sway, and roll motions in finite water depth is investigated based on small amplitude water wave theory and linear structural response. The analytical expressions for the radiation potentials, wave forces, and hydrodynamic coefficients are presented based on matched eigenfunction expansion method (MEFEM). The correctness of the analytical results of wave forces is compared with the construction of a numerical model using the open-source boundary element method code NEMOH. In addition, the present result is compared with the existing published experimental results available in the literature. The effects of the different design parameters on the floating box-type rectangular structure are studied by analyzing the vertical wave force, horizontal wave force, torque, added mass, and damping coefficients due to the heave, sway, and roll motions, and the comparison analysis between the forces is also analyzed in detail. Further, the effect of reflection and transmission coefficients by varying the structural width and drafts are analyzed.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the analysis of the forces generated by the floating rectangular box - like structure under the action of waves. Specifically, the paper aims to study the wave radiation problem of the floating rectangular box - like structure in three - dimensional space through analytical and numerical methods, especially the wave forces, added mass and radiation damping coefficients caused by heave, sway and roll motions. These studies are of great significance for the design of effective floating breakwaters in ocean and coastal engineering.
### Main research contents:
1. **Establishment of mathematical model**:
- A mathematical hydrodynamic model for surface wave radiation of the floating rectangular box - like structure in three - dimensional space was established.
- The analytical solution of the hydrodynamic coefficients was obtained by using the Matched Eigenfunction Expansion Method (MEFEM).
2. **Comparison between analytical results and numerical results**:
- The analytical results were compared with the numerical model constructed by using the open - source Boundary Element Method code NEMOH.
- The results were further compared with the experimental data in the existing literature.
3. **Analysis of the influence of design parameters**:
- The influence of different design parameters (such as structure width and draft depth) on the vertical wave force, horizontal wave force, torque, added mass and damping coefficient of the floating rectangular box - like structure was studied.
- A detailed comparison of forces under different motion modes (heave, sway, roll) was carried out.
### Formulas and analytical expressions:
- **Velocity potential**:
\[
\Phi(x, y, z, t)=\text{Re}\left\{\phi(x, y, z)e^{-i\omega t}\right\}
\]
where \(\phi(x, y, z)\) satisfies the three - dimensional Laplace equation:
\[
\nabla_{xyz}^{2}\phi = 0
\]
- **Incident wave potential**:
\[
\phi_{I}(x, y, z)=\sum_{m = 1}^{\infty}igI_{m0}\frac{\cosh k_{0}(h - y)}{\cosh k_{0}h}\cos\gamma_{m}z e^{-ip_{m0}x}
\]
where \(\gamma_{m}=\frac{m\pi}{b}\), \(p_{m0}^{2}=k_{0}^{2}-(\gamma_{m})^{2}\).
- **Radiation wave potential**:
\[
\phi_{R}^{(S)}(x, y, z)=\text{Re}\left[-i\omega I_{R}^{(S)}\varphi_{R}^{(S)}(x, y, z)\right]
\]
where \(\varphi_{R}^{(S)}(x, y, z)\) satisfies the three - dimensional Laplace equation:
\[
\frac{\partial^{2}\varphi_{R}^{(S)}}{\partial x^{2}}+\frac{\partial^{2}\varphi_{R}^{(S)}}{\partial y^{2}}+\frac{\partial^{2}\varphi_{R}^{(S)}}{\partial z^{2}}=0
\]
- **Wave force**:
\[
F_{e}^{j}=i\rho\omega\left(\int_{S_{b}}\phi_{I}(x, y, z)n_{j}dsdz-\int_{S_{b}}\phi_{R}^{j}(x, y, z)\frac{\partial\phi_{I}}{\partial n}dsdz\right)
\]
- **Added mass and damping coefficient**:
\[
F_{R}^{j}=\rho\omega^{2}I_{R}^{(S)}e^{-i\omega t}\sum_{S = 1}^{3}\left(\omega^{2}M_{S,j}I_{R}^{(S)}e^{-i\omega t}\right)