Abstract:Abstract A floating raft is a complicated multilayer vibration isolation system, which is often simplified as a two-degree-of-freedom viscous damping system in analysis. In order to research the influences of the hysteretic damping and the raft flexibility on the vibration isolation effect, a three-degree of freedom hysteretic mechanical model of the floating raft is established, and the impedance method is adopted to deduce the model of the force transmissibility of the floating raft. The analytic calculation methods of force transmissibility are given aiming at the low-frequency range, the resonance range, and the high-frequency range, respectively. Finally, the influence rules of damping, mass, and stiffness on force transmissibility are analyzed aiming at the value range of parameters of most floating rafts. The main analysis conclusions are listed as follows: the analytic calculation equation for resonance frequency and resonance peak is accurate; the vibration isolation effect of the high frequency range is determined by the entire floating raft, the unconstrained raft, the inherent frequency of the equipment, the mass ratio between the raft and the equipment only; the hysteretic damping can reduce the force transmissibility at the place of the resonance frequency of the floating raft, which shall be maximized; the increase in the mass of the raft will reduce the force transmissibility during the frequency range above the inherent frequency of the equipment, but it will reduce the marginal benefit; the reduction in the stiffness of the isolator or the raft will reduce the force transmissibility during the frequency range above the inherent frequency of the equipment, and will increase the displacement of the equipment; with limited displacement, it is better to design the isolator and the raft according to the principle of equal stiffness.

Analytical Study on Hydrodynamic Performance of a Raft-Type Wave Power Device

Performance of a Raft-Type Wave Energy Converter with Diverse Mooring Configurations

Numerical Study on the Dynamics of a Two-Raft Wave Energy Conversion Device

Hydrodynamic Performance of a T-shaped Floating Breakwater

Theoretical and Numerical Studies of Off-Shore Oscillating Water Column Wave Energy Device

Numerical Study on the Wave Dissipating Performance of a Submerged Heaving Plate Breakwater

Study on the Wave Power Absorption of a Raft-Typed Wave Energy Collector

An experimental investigation into the wave power extraction of a floating box-type breakwater with dual pneumatic chambers

Experiments and CFD Modeling of a Dual-Raft Wave Energy Dissipator

Numerical Study on the Performance of A Twin-Raft Wave Energy Dissipator in A Stilling Basin

Analytical Study on Wave Power Extraction from a Hybrid Wave Energy Converter

Analytical study on hydrodynamic performance of wave-power device with bottom-pivoted flap

Dynamic analysis and experimental investigation of particle damping for the vibration reduction and isolation of floating raft using the two-phase flow theory of gas-particle

Research on the three degrees of freedom hysteretic mechanical model of floating rafts

Numerical investigation of adaptive damping control for raft-type wave energy converters

Theoretical Analysis of an Asymmetric Offshore-Stationary Oscillating Water Column Device with Bottom Plate

Analysis for Wave Power Capture Capacity of Two Interconnected Floats in Regular Waves

Maximum Theoretical Power Absorption of Connected Floating Bodies under Motion Constraints

Wave Diffraction and Radiation by Multiple Rectangular Floaters

Numerical Study on Wave Dissipation and Mooring Force of a Horizontal Multi-Cylinder Floating Breakwater

Experimental study on heave performance of a new wave energy power generation device based on regular waves