Determination of the shape of the ear channel

A. G. Ramm,A.G.Ramm

DOI: https://doi.org/10.48550/arXiv.math-ph/0502055

2005-02-27

Mathematical Physics

Abstract:It is proved that the measurement of the acoustic pressure on the ear membrane allows one to determine the shape of the ear channel uniquely.

What problem does this paper attempt to address?

The shape of the ear canal

A.G.Ramm

DOI: https://doi.org/10.1016/j.physleta.2006.02.045

2005-11-15

Abstract:It is proved that the measurement of the acoustic pressure on the ear membrane allows one to determine the shape of the ear $ uniquely.

Analysis of PDEs
A Study on the relationship between the geometrical shapes and the biometrical acoustic characteristics of human ear canal

Riki Kimura,Shunsuke Tanaka,Naoki Wakui,Naoki Kodama,Shohei Yano

DOI: https://doi.org/10.48550/arXiv.2208.14182

IF: 4.729

2022-08-30

Signal Processing

Abstract:Ear acoustic authentication is a new biometrics method and it utilizes the differences in acoustic characteristics of the ear canal between users. However, there have been few reports on the factors that cause differences in the acoustic characteristics. We investigate the relationship between ear canal shapes and acoustic characteristics in terms of user-to-user similarity. We used magnetic resonance imaging (MRI) to measure ear canal geometry. As a result, the correlation coefficient between shape similarity and acoustic characteristic similarity is higher than 0.7 and the coefficient of determination is higher than 0.5. This suggests that the difference in the shape of the ear canal is one of the important factors.
An Average of the Human Ear Canal: Recovering Acoustical Properties via Shape Analysis

Sune Darkner,Stefan Sommer,Andreas Schuhmacher,Henrik Ingerslev Anders O. Baandrup,Carsten Thomsen,Søren Jønsson

DOI: https://doi.org/10.48550/arXiv.1811.03848

2018-11-09

Computer Vision and Pattern Recognition

Abstract:Humans are highly dependent on the ability to process audio in order to interact through conversation and navigate from sound. For this, the shape of the ear acts as a mechanical audio filter. The anatomy of the outer human ear canal to approximately 15-20 mm beyond the Tragus is well described because of its importance for customized hearing aid production. This is however not the case for the part of the ear canal that is embedded in the skull, until the typanic membrane. Due to the sensitivity of the outer ear, this part, referred to as the bony part, has only been described in a few population studies and only ex-vivo. We present a study of the entire ear canal including the bony part and the tympanic membrane. We form an average ear canal from a number of MRI scans using standard image registration methods. We show that the obtained representation is realistic in the sense that it has acoustical properties almost identical to a real ear.
Using a one-dimensional finite-element approximation of Webster's horn equation to estimate individual ear canal acoustic transfer from input impedances

Nick Wulbusch,Reinhild Roden,Alexey Chernov,Matthias Blau

DOI: https://doi.org/10.1121/10.0019378

2023-04-14

Abstract:In many applications, knowledge of the sound pressure transfer to the eardrum is important. The transfer is highly influenced by the shape of the ear canal and its acoustic properties, such as the acoustic impedance at the eardrum. Invasive procedures to measure the sound pressure at the eardrum are usually elaborate or costly. In this work, we propose a numerical method to estimate the transfer impedance at the eardrum given only input impedance measurements at the ear canal entrance by using one-dimensional first-order finite elements and Nelder-Mead optimization algorithm. Estimations on the area function of the ear canal and the acoustic impedance at the eardrum are achieved. Results are validated through numerical simulations on ten different ear canal geometries and three different acoustic impedances at the eardrum using synthetically generated data from three-dimensional finite element simulations.

Optimization and Control,Audio and Speech Processing,Numerical Analysis
Ground-truth validation of the "earbuds method" for measuring acoustic nasalance

Christopher Carignan

DOI: https://doi.org/10.1121/10.0028122

2024-08-01

Abstract:Among the variety of methodological tools available for quantifying the degree of nasalization, nasometry has remained a popular choice for both academic and clinical research on speech due to its relatively low cost, portability, ease of use, and interpretability. In its simplest form, nasometry involves two microphones that independently capture the acoustic radiation from the mouth and nose. Recently, a method was proposed by Stewart and Kohlberger [(2017). Lang. Doc. Conserv. 11, 49-80] of using earbuds to achieve a similar result. Although the method has been widely used since, most notably in the context of linguistic fieldwork, it has yet to be tested against ground-truth measurements of acoustic nasalance from a commercially established device; the current study attempts to provide this ground-truth comparison. A wide variety of characteristics of the relationship between nasalance measurements created using acoustic data co-registered from a commercial nasometer, silicone earbuds, and flat earbuds are thoroughly examined. The results suggest that the "earbuds method" may provide reliable estimates of nasality when assessed at a global level (i.e., overall averages, relatively high/low nasalance scores coinciding with the presence/absence of nasalization), but that the accuracy of these estimates may decline at more fine-grained levels in different ways that are outlined in the discussion.
Analyzing eustachian tube function in patients with symptoms of chronical Eustachian tube dysfunction by pressure chamber measurements

Moritz F. Meyer,Christine Korthäuer,Stefanie Jansen,Karl-Bernd Hüttenbrink,Dirk Beutner

DOI: https://doi.org/10.1007/s00405-018-4938-z

2018-03-17

Abstract:PurposeThe determination of Eustachian tube dysfunction (ETD) subtypes in daily routines is based on symptoms of the patient, otoscopy, nasopharyngoscopy, tympanometry, pure tone audiometry, and Valsalva’s test, even though this clinical assessment is often not sufficient to clearly diagnose the subtype. In the study, we have evaluated the possibility of the determination of different subtypes of ETD by pressure chamber measurements.MethodsIn a single-person pressure chamber, we exposed 17 patients to pressure increases and decreases. The pressure profile of the continuous impedance of each tympanic membrane during the 5-min lasting measurement and the Eustachian tube (ET) pressure equilibration function reflecting parameters—ET opening pressure (ETOP), ET opening duration (ETOD), ET closing pressure (ETCP), and ET opening frequency (ETOF)—were documented and analyzed.ResultsBy interpretation of the pattern of the continuous impedance of the tympanic membrane, we could relate patients to a subtype of ETD. Clearly identified by pressure chamber-based measurements could be patients with patulous ETD (n = 2) and baro-challenged-induced ETD (n = 4). The remaining 11 patients were classified as ETD not further classified. Patients diagnosed as patulous ETD did not show a pressure response on the tympanic membrane during the phases of pressure increase and decrease. In patients with baro-challenged-induced ETD, the measurement had to be interrupted due to the development of otalgia during progressive pressure increase as a result of insufficient possibility to equalize pressure variations.ConclusionsPressure chamber-based measurements enable an objective and safe dynamic testing of the ET pressure equalization function in patients with ETD. In addition, via continuous impedance measurement, it is possible to identify patients with patulous ETD and baro-challenge-induced ETD. These results are a relevant preliminary work to identify and assess patients for different therapy options.

otorhinolaryngology
Three-dimensional finite element modeling of the human external ear: simulation study of the bone conduction occlusion effect

Martin K Brummund,Franck Sgard,Yvan Petit,Frédéric Laville

DOI: https://doi.org/10.1121/1.4864484

Abstract:A linear three-dimensional (3D) elasto-acoustic finite element model was used to simulate the occlusion effect following mechanical vibration at the mastoid process. The ear canal and the surrounding soft and bony tissues were reconstructed using images of a female cadaver head (Visible Human Project(®)). The geometrical model was coupled to a 3D earplug model and imported into comsol Multiphysics (COMSOL(®), Sweden). The software was used to solve for the sound pressure at the eardrum. Finite element modeling of the human external ear and of the occlusion effect has several qualities that can complement existing measuring and modeling techniques. First, geometrically complex structures such as the external ear can be reconstructed. Second, various material behavioral laws and complex loading can be accounted for. Last, 3D analyses of external ear substructures are possible allowing for the computation of a broad range of acoustic indicators. The model simulates consistent occlusion effects (e.g., insertion depth variability). Comparison with an experimental dataset, kindly provided by Stenfelt and Reinfeldt [Int. J. Audiol. 46, 595-608 (2007)], further demonstrates the model's accuracy. Power balances were used to analyze occlusion effect differences obtained for a silicone earplug and to examine the increase in sound energy when the ear canal is occluded (e.g., high-pass filter removal).
Lexicon for classifying ear-canal shapes

J. C. Martinez,Goh Zhi Hwee,Luis Yap,Kenneth Wei De Chua,Savitha Kamath,Conrad Kang Rui Chung,Wendy Yu Bing Teo,Charmaine Kai Ling Tan,Stylianos Dritsas,Robert E. Simpson

DOI: https://doi.org/10.1038/s41598-023-38570-3

IF: 4.6

2023-07-23

Scientific Reports

Abstract:The ear canal is usually described as an S-shaped funnel. In attempting to classify ear-canal shapes obtained from point clouds digitized from molds of 300 ears, the problem of designing criteria for distinguishing and organizing the canal shapes arose. In this work, we extracted features inspired by the S-shape characteristic (critical point, maximum, minimum, twist, writhe, translation, rotation) and, through them, introduced 14 types of ear-canal shapes. This classification allowed comparison of ears within a type and of ears between different types. It expanded our range of descriptors of canal shapes and unlocked perspectives for applications.

multidisciplinary sciences
Wideband impedance measurement in the human ear canal; In vivo study on 32 subjects

Søren Jønsson,Andreas Schuhmacher,Henrik Ingerslev Jørgensen

DOI: https://doi.org/10.48550/arXiv.1811.03389

IF: 4.506

2018-11-08

Medical Physics

Abstract:The human ear canal couples the external sound field to the eardrum and the solid parts of the middle ear. Therefore, knowledge of the acoustic impedance of the human ear is widely used in the industry to develop audio devices such as smartphones, headsets, and hearing aids. In this study acoustic impedance measurements in the human ear canal of 32 adult subjects is presented. Wideband measurement techniques developed specifically for this purpose enable impedance measurement to be obtained in the full audio band up to 20kHz. Full ear canal geometries of all subjects are also available from the first of its kind in vivo based magnetic resonance imaging study of the human outer ear. These ear canal geometries are used to obtain individual ear moulds of all subjects and to process the data. By utilizing a theoretical Webster's horn description, the measured impedance is propagated in each ear canal to a common theoretical reference plane across all subjects. At this plane the mean human impedance and standard deviation of the population is found. The results are further demographically divided by gender and age and compared to a widely used ear simulator (the IEC711 coupler).
Material Identification on Thin Shells Using the Virtual Fields Method, Demonstrated on the Human Eardrum

Felipe S M Pires,Stéphane Avril,Pieter Livens,Júlio A Cordioli,Joris J J Dirckx

DOI: https://doi.org/10.1115/1.4052381

2022-03-01

Abstract:Characterization of material parameters from experimental data remains challenging, especially on biological structures. One of such techniques allowing for the inverse determination of material parameters from measurement data is the virtual fields method (VFM). However, application of the VFM on general structures of complicated shape has not yet been extensively investigated. In this paper, we extend the framework of the VFM method to thin curved solids in three-dimensional, commonly denoted shells. Our method is then used to estimate the Young's modulus and hysteretic damping of the human eardrum. By utilizing Kirchhoff plate theory, we assume that the behavior of the shell varies linearly through the thickness. The total strain of the shell can then be separated in a bending and membrane strain. This in turn allowed for an application of the VFM based only on data of the outer surface of the shell. We validated our method on simulated and experimental data of a human eardrum made to vibrate at certain frequencies. It was shown that the identified material properties were accurately determined based only on data from the outer surface and are in agreement with literature. Additionally, we observed that neither the bending nor the membrane strain in an human eardrum can be neglected and both contribute significantly to the total strain found experimentally.
Morphology and anatomical variability of the external auditory canal: A population-based MRI study

Lisa Hennig,Markus Krüger,Robin Bülow,Till Ittermann,Friedrich Ihler,Franziska Krohn-Jäger,Karl-Friedrich Krey,Amro Daboul

DOI: https://doi.org/10.1016/j.aanat.2024.152319

2024-08-28

Abstract:Background: The external auditory canal (EAC) exhibits a complex morphology and strong inter-individual variations. However, these have not yet been comprehensively described in the literature. Purpose: This study aims to determine the width, height and cross-sectional area of the cartilaginous portion of the EAC and to describe the three-dimensional morphology and variability of different EACs. Methods: Magnetic resonance imaging was performed on 870 subjects (401 male, 469 female, resulting in 1740 EACs) who participated in the longitudinal, population-based cohort study 'Study of Health in Pomerania-START-3'. The height and width were measured in the cartilaginous part of the EAC, between the first and second bend. The variability of the EAC morphology was visualized in three-dimensional models. Results: The mean height (vertical length) of the EAC was 8.62 mm (SD = 2.42) on the right, 8.47 mm (SD = 2.36) on the left. The width (horizontal length) was 4.08 mm (SD = 1.6) on the right, 3.93 mm (SD = 1.64) on the left. The EAC cross-section was 28.6 mm2 (SD = 15.19) on the right, 27.15 mm2 (SD = 14.33) on the left. The average cross-sectional area of the EAC in men was higher than in women. Subjects with larger body size had larger cross-sectional areas. Subjects with higher body mass index tended to have smaller cross-sections. Although the average EAC had an oval shape, a three-dimensional comparison of different EACs revealed strong individual variation in morphology. Conclusion: This study enhances the understanding of otolaryngologists and anatomists regarding the complex morphology and variability of the cartilaginous portion of the EAC.
Measuring absorbed energy in the human auditory system using finite element models: A comparison with experimental results

Cristina Castro-Egler,Antonio Garcia-Gonzalez,Jose A. Aguilera,Pablo M. Cerezo,Pablo Lopez-Crespo,Antonio González-Herrera

DOI: https://doi.org/10.3233/thc-248001

IF: 1.6

2024-04-27

Technology and Health Care

Abstract:BACKGROUND: There are different ways to analyze energy absorbance (EA) in the human auditory system. In previous research, we developed a complete finite element model (FEM) of the human auditory system. OBJECTIVE: In this current work, the external auditory canal (EAC), middle ear, and inner ear (spiral cochlea, vestibule, and semi-circular canals) were modelled based on human temporal bone histological sections. METHODS: Multiple acoustic, structure, and fluid-coupled analyses were conducted using the FEM to perform harmonic analyses in the 0.1–10 kHz range. Once the FEM had been validated with published experimental data, its numerical results were used to calculate the EA or energy reflected (ER) by the tympanic membrane. This EA was also measured in clinical audiology tests which were used as a diagnostic parameter. RESULTS: A mathematical approach was developed to calculate the EA and ER, with numerical and experimental results showing adequate correlation up to 1 kHz. Another published FEM had adapted its boundary conditions to replicate experimental results. Here, we recalculated those numerical results by applying the natural boundary conditions of human hearing and found that the results almost totally agreed with our FEM. CONCLUSION: This boundary problem is frequent and problematic in experimental hearing test protocols: the more invasive they are, the more the results are affected. One of the main objectives of using FEMs is to explore how the experimental test conditions influence the results. Further work will still be required to uncover the relationship between middle ear structures and EA to clarify how to best use FEMs. Moreover, the FEM boundary conditions must be more representative in future work to ensure their adequate interpretation.

engineering, biomedical,health care sciences & services
A new impedance method for measuring middle ear mechanics and eustachian tube function

A Ivarsson

DOI: https://doi.org/10.1177/00034894800890s347

Abstract:The main principle of this new impedance method is a continuous recording of changes in tympanic membrane compliance in relation to its neutral position during changes in pressure, using a small pressure chamber. The subject sitting in the chamber can be placed in the recumbent position by rotation of the chamber. The working principles of the impedance method are: a servosystem regulates displacement of the loudspeaker membrane in order to keep the sound pressure in the external ear canal constant, independent of tympanic membrane compliance. From this recording it is possible to isolate tympanic membrane compliance during changes in intratympanic pressure as well as during ambient pressure changes. The results indicate that the new regulated impedance method combined with the small pressure chamber should be useful in routine clinical examination of middle ear mechanics and eustachian tube function.
Measurement of tympanic membrane displacement arising from aural cardiovascular activity, swallowing, and intra-aural muscle reflex

R J Marchbanks

DOI: https://doi.org/10.3109/00016488409107543

Abstract:A new technique based on constant pressure metrology has been developed to measure displacement of the tympanic membrane. Known as the Tympanic Membrane Displacement Measurement System (TMD system), this device is designed to be suitable for application in the audiology clinic. The TMD system resolves volume displacements as small as a nanolitre. Measurements are absolute--being independent of volume and compliance of the external auditory meatus, have a wide dynamic range, and are essentially made under free-field conditions. It employs closed volume metrology which allows the meatal pressure to be varied independently of the ambient pressure. The principle of constant pressure metrology using a standard TDH-39 headphone cone is discussed. Details are provided on the electronics, mechanical hardware, and software used for evaluating aural cardiovascular activity, stapedial muscle reflex, swallowing and Eustachian tube function.
Features in geometric receiver shapes modelling bat-like directivity patterns

Francesco Guarato,Heather Andrews,James F C Windmill,Joseph Jackson,Gareth Pierce,Anthony Gachagan

DOI: https://doi.org/10.1088/1748-3190/10/5/056007

2015-09-03

Abstract:The directional properties of bat ears as receivers is a current area of interest in ultrasound research. This paper presents a new approach to analyse the relationship between morphological features and acoustical properties of the external ear of bat species. The beam pattern of Rousettus leschenaultii's right ear is measured and compared to that of receiver structures whose design is inspired by the bat ear itself and made of appropriate geometric shapes. The regular shape of these receivers makes it possible to control the key reception parameters and thus to understand the effect on the associated beam pattern of the parameters themselves. Measurements show one receiver structure has a beam pattern very similar to that of R. leschenaultii's ear, thus explaining the function of individual parts constituting its ear. As it is applicable to all bat species, this approach can provide a useful tool to investigate acoustics in bats, and possibly other mammals.
Surgical Considerations in Inner Ear Gene Therapy from Human Temporal Bone Anatomy

Alyssa Brown,MengYu Zhu,Alireza Rohani,Hanif Ladak,Sumit K. Agrawal,Konstantina M. Stankovic,D. Bradley Welling

DOI: https://doi.org/10.1002/lary.31259

IF: 2.97

2024-01-12

The Laryngoscope

Abstract:Recently directed methods of inner ear drug delivery highlight the necessity for understanding critical anatomical dimensions. This study compares anatomical measurements of the human middle and inner ear, relevant for safe inner ear drug delivery, using three different methods. Objective(s) Recently directed methods of inner ear drug delivery underscore the necessity for understanding critical anatomical dimensions. This study examines anatomical measurements of the human middle and inner ear relevant for inner ear drug delivery studied with three different imaging modalities. Methods Post‐mortem human temporal bones were analyzed using human temporal bone histopathology (N = 24), micro computerized tomography (μCT; N = 4), and synchrotron radiation phase‐contrast imaging (SR‐PCI; N = 7). Nine measurements involving the oval and round windows were performed when relevant anatomical structures were visualized for subsequent age‐controlled analysis, and comparisons were made between imaging methods. Results Combined human temporal bone histopathology showed the mean distance to the saccule from the center of the stapes footplate (FP) was 2.07 ± 0.357 mm and the minimum distance was 1.23 mm. The mean distance from the round window membrane (RWM) to the osseous spiral lamina (OSL) was 1.75 ± 0.199 mm and the minimum distance was 1.43 mm. Instruments inserted up to 1 mm past the center of the FP are unlikely to cause saccular damage, provided there are no endolymphatic hydrops. Similarly, instruments inserted up to 1 mm through the RWM in the trajectory toward the OSL are unlikely to cause OSL damage. Conclusion The combined analyses of inner‐ear dimensions of age‐controlled groups and imaging modalities demonstrate critical dimensions of importance to consider when inserting delivery vehicles into the human cochlea. Level of Evidence N/A Laryngoscope, 2024

medicine, research & experimental,otorhinolaryngology
Audiologic changes after pinna augmentation

Kavit Amin,Robert Hone,Rahul Kanegaonkar

Abstract:No studies to date have objectively assessed whether pinna morphology affects sound intensity detected within the external auditory canal (EAC). Commonly performed procedures on the EAC are carried out for acquired and congenital pathology, together with correction of ear deformities. Our aim was to use an experimental model to identify whether a relationship exists between pinna shape and its subsequent effect on the hearing subject. An anatomically accurate and life-size model made of rubber composite was used for this study. Serial sections (small wedge, defect open; small wedge, defect closed; large wedge, defect open; large wedge, defect closed [equivalent to a protruding ear]; and pinnectomy) were undertaken, and the sound intensity changes assessed at the junction between the EAC and middle ear (tympanic membrane position) using an AURICAL Plus (Otometrics; Taastrup, Denmark) sound processor. A statistically significant loss was demonstrated for wedge-excised models, which was greatest at 180° azimuth. This loss was significantly reduced when the wedge defects were closed. A statistically significant improvement was demonstrated in the protruding ("bat") ear model compared with the normal ear at 0° azimuth. In this model, gain in sound intensity is adversely affected by pinna wedge resection. Because this change may be increased in those with protruding ears, this factor is important to consider for all cosmetic and noncosmetic operations to the pinna, and it supports the notion that the pinna is not a simple funnel.
Fully Automated Measurement of Cochlear Duct Length From Clinical Temporal Bone Computed Tomography

Caio A Neves,Emma D Tran,Shayna P Cooperman,Nikolas H Blevins

DOI: https://doi.org/10.1002/lary.29869

Abstract:Objectives/hypothesis: To present and validate a novel fully automated method to measure cochlear dimensions, including cochlear duct length (CDL). Study design: Cross-sectional study. Methods: The computational method combined 1) a deep learning (DL) algorithm to segment the cochlea and otic capsule and 2) geometric analysis to measure anti-modiolar distances from the round window to the apex. The algorithm was trained using 165 manually segmented clinical computed tomography (CT). A Testing group of 159 CTs were then measured for cochlear diameter and width (A- and B-values) and CDL using the automated system and compared against manual measurements. The results were also compared with existing approaches and historical data. In addition, pre- and post-implantation scans from 27 cochlear implant recipients were studied to compare predicted versus actual array insertion depth. Results: Measurements were successfully obtained in 98.1% of scans. The mean CDL to 900° was 35.52 mm (SD, 2.06; range, [30.91-40.50]), the mean A-value was 8.88 mm (0.47; [7.67-10.49]), and mean B-value was 6.38 mm (0.42; [5.16-7.38]). The R2 fit of the automated to manual measurements was 0.87 for A-value, 0.70 for B-value, and 0.71 for CDL. For anti-modiolar arrays, the distance between the imaged and predicted array tip location was 0.57 mm (1.25; [0.13-5.28]). Conclusion: Our method provides a fully automated means of cochlear analysis from clinical CTs. The distribution of CDL, dimensions, and cochlear quadrant lengths is similar to those from historical data. This approach requires no radiographic experience and is free from user-related variation. Level of evidence: 3 Laryngoscope, 132:449-458, 2022.
Effect of curvature on sound propagation in the ear canal

Yuanxin Xia,Zhihan Guo,Elisabet Tiana-Roig,Vicente Cutanda Henriquez,Frieder Lucklum

DOI: https://doi.org/10.1121/10.0024495

2024-01-01

The Journal of the Acoustical Society of America

Abstract:In this paper, we investigate the effect of the curvature and torsion of the ear canal on its resonance through a comparison between several ear canal models. Utilizing Stinson's ear canal geometries as a reference, we build and analyze several ear canal models using both transmission matrix and numerical methods for the purpose of comparative assessment. A conical transmission unit, which considers visco-thermal effects, is employed for the modeling of the human ear canal. While the transfer matrix and numerical method agree well for a straight axis model, this simplification results in up to 20% deviation from a curved canal. We propose the curve twist ratio as a metric to quantify the influence of curvature on the ear canal and find that our proposed metric can effectively express the error introduced by the simplified straight axis model. Upon this metric, an empirical equation is proposed for incorporating the curvature effect in the transmission matrix method, enabling it to generate comparable results to those of the numerical method, which considers the effect of the curvature and torsion, thus dramatically accelerating computation.

acoustics,audiology & speech-language pathology
Effects of Tympanic Membrane Electrodes on Sound Transmission From the Ear Canal to the Middle and Inner Ears

Cailin Hannon,James D. Lewis

DOI: https://doi.org/10.1097/aud.0000000000001524

2024-05-22

Ear & Hearing

Abstract:The first objective of the study was to compare approaches to eardrum electrode insertion as they relate to the likelihood of introducing an acoustic leak between the ear canal and eartip. A common method for placing a tympanic membrane electrode involves securing the electrode in the canal by routing it underneath a foam eartip. This method is hypothesized to result in a slit leak between the canal and foam tip due to the added bulk of the electrode wire. An alternative approach involves creating a bore in the wall of the foam tip that the electrode can be threaded through. This method is hypothesized to reduce the likelihood of a slit leak before the electrode wire is integrated into the foam tip. The second objective of the study was to investigate how sound transmission in the ear is affected by placing an electrode on the eardrum. It was hypothesized that an electrode in contact with the eardrum increases the eardrum's mass, with the potential to reduce sound transmission at high frequencies.

otorhinolaryngology,audiology & speech-language pathology

Determination of the shape of the ear channel

The shape of the ear canal

A Study on the relationship between the geometrical shapes and the biometrical acoustic characteristics of human ear canal

An Average of the Human Ear Canal: Recovering Acoustical Properties via Shape Analysis

Using a one-dimensional finite-element approximation of Webster's horn equation to estimate individual ear canal acoustic transfer from input impedances

Ground-truth validation of the "earbuds method" for measuring acoustic nasalance

Analyzing eustachian tube function in patients with symptoms of chronical Eustachian tube dysfunction by pressure chamber measurements

Three-dimensional finite element modeling of the human external ear: simulation study of the bone conduction occlusion effect

Lexicon for classifying ear-canal shapes

Wideband impedance measurement in the human ear canal; In vivo study on 32 subjects

Material Identification on Thin Shells Using the Virtual Fields Method, Demonstrated on the Human Eardrum

Morphology and anatomical variability of the external auditory canal: A population-based MRI study

Measuring absorbed energy in the human auditory system using finite element models: A comparison with experimental results

A new impedance method for measuring middle ear mechanics and eustachian tube function

Measurement of tympanic membrane displacement arising from aural cardiovascular activity, swallowing, and intra-aural muscle reflex

Features in geometric receiver shapes modelling bat-like directivity patterns

Surgical Considerations in Inner Ear Gene Therapy from Human Temporal Bone Anatomy

Audiologic changes after pinna augmentation

Fully Automated Measurement of Cochlear Duct Length From Clinical Temporal Bone Computed Tomography

Effect of curvature on sound propagation in the ear canal

Effects of Tympanic Membrane Electrodes on Sound Transmission From the Ear Canal to the Middle and Inner Ears