Abstract:Polyethylene oxide (PEO)-based solid-state electrolyte (SSE) is attractive due to its excellent adhesion with electrodes and good processability. However, lithium dendrites easily penetrate PEO because of their soft nature, which results in inferior battery performance and safety issues. In this talk, we will discuss the development of 3D (insulating) amorphous carbon and 3D amorphous BN to improve the properties of polyethylene oxide (PEO)-based solid-state electrolytes for Li ion batteries. For the 3D amorphous carbon, we developed a novel self-healing PEO-based SSE is prepared by incorporating 2 wt% amorphous three-dimensional carbon (3DC). This SSE possesses suitably low electronic conductivity for battery applications (on the order of 10^−9 S/cm), which is five orders of magnitude lower than its ionic conductivity (10 −4 S/cm) at 60 °C. In addition, the improved fluidity and strong adhesion between the 3DC and the PEO matrix contribute to the self-healing ability of SSE, which will repair the cracks of SSE formed during battery cycling. Moreover, this SSE shows enhanced ionic and thermal conductivities and mechanical strength, suppressing the formation and growth of lithium dendrites. As a result, this SSE exhibits excellent electrochemical stability, achieving 5000 h of stable cycles in lithium symmetric cell (0.1 mA cm −2 , 0.1 mAh cm −2 ) and 850 long-term stable cycles for the LFP//Li full cell at 1 C (0.31 mA cm −2 ). For the 3D amorphous BN, we have developed the first synthesis of powdery hexagonal boron nitride (h-BN). This synthesis introduces a novel NaCl-glucose assisted strategy to synthesize micron-sized 3D h-BN with a honeycomb-like structure. When incorporated into polyethylene oxide-based electrolytes for Li-ion batteries, 5 wt% of 3D h-BN significantly enhances ionic conductivity and mechanical strength. Consequently, this composite electrolyte demonstrates superior electrochemical stability; it delivers 300 h of stable cycles in the lithium symmetric cell at 0.1 mA cm -2 and retains 89 % of discharge capacity (138.9 mAh/g) after 100 cycles at 1 C in the LFP//Li full cell. These two approaches reveal that 3DC and 3D h-BN can be used to improve the properties of PEO-based electrolytes of Li-ion batteries.

The Synthesis of Three‐Dimensional Hexagonal Boron Nitride as the Reinforcing Phase of Polymer‐Based Electrolyte for All‐Solid‐State Li Metal Batteries

Fluorinated boron nitride nanosheet enhanced ultrathin and conductive polymer electrolyte for high‐rate solid‐state lithium metal batteries

Amorphous Boron Nitride Nanosheet‐Based Solid State Electrolytes with High Ionic Conductivity

Anomalous High Ionic Conductivity of Nanoporous Β-Li3ps4

Using Three-Dimensional Carbon and Boron Nitride to Improve the Properties of Polyethylene Oxide-Based Solid-State Electrolytes for Li Ion Batteries

Chemically Exfoliated Boron Nitride Nanosheets Form Robust Interfacial Layers for Stable Solid-State Li Metal Batteries

Stabilized Solid Electrolyte Interphase Induced by Ultrathin Boron Nitride Membranes for Safe Lithium Metal Batteries

Novel Boron-Doped Biphenylene Network As High-Capacity Anodes for Metal Ions Batteries: from Monolayer to Bilayer Structure

Boron nitride as an "all-in-one" gelator to immobilize concentrated sulfone electrolyte towards high performance lithium metal batteries

Highly Conductive and Stable Composite Polymer Electrolyte with Boron Nitride Nanotubes for All-Solid-State Lithium Metal Batteries

Stabilizing Solid Electrolyte-Anode Interface in Li-Metal Batteries by Boron Nitride-Based Nanocomposite Coating

Interpenetrating LiB/Li3BN2 phases enabling stable composite lithium metal anode

H-Bn Nanosheets As 2d Substrates to Load 0d Fe3o4 Nanoparticles: A Hybrid Anode Material for Lithium-Ion Batteries

Defective Boron Nitride Inducing the Lithium‐ion Migration on the Sub‐Surface of LiBH4

High-Modulus Hexagonal Boron Nitride Nanoplatelet Gel Electrolytes for Solid-State Rechargeable Lithium-Ion Batteries

Inorganic‐Rich Interphase Induced by Boric Oxide Solid Acid toward Long Cyclic Solid‐State Lithium‐Metal Batteries

Lignin-Derived Holey, Layered, and Thermally Conductive 3D Scaffold for Lithium Dendrite Suppression

Uniform Boron Nitride Nanospheres with Reactive Surface Defects for Composite Solid-State Electrolytes

Boron Nitride Enhanced Garnet-Type (li6.25al0.25la3zr2o12) Ceramic Electrolyte for an All-Solid-State Lithium-Ion Battery

(Digital Presentation) H-BN Enhanced Gel Polymer Electrolyte for Solid State Li-Ion Batteries

Polyacrylonitrile-Polyvinyl Alcohol-Based Composite Gel-Polymer Electrolyte for All-Solid-State Lithium-Ion Batteries