Abstract:O and N substitution produces ultrastable POS33– and Li3N unique functional units, wherein POS33‐ intrinsically enhance the structural stability of Li2.96P0.98S3.92O0.06–Li3N glass–ceramic and suppresses the generation of toxic H2S in the ambient environment. Furthermore, O and N leads to the Pre‐solid‐electrolyte interphase (SEI) enriched Li2O, and Li3N species realize stable and reversible Li‐stripping/plating for Li//Li cells beneficial for all‐solid‐state lithium–metal batteries.The marriage of solid‐state sulfide electrolytes (SSSEs) with Li‐anode and oxide‐based cathodes can multiply the energy density of all‐solid‐state Lithium–metal batteries (ASSLMBs). However, hydrolysis in the air, reduction at the Li/SSSE interface, and growth of Li‐dendrites inside SSSEs collectively block the route of sulfide‐based ASSLMBs. Herein, a novel Li2.96P0.98S3.92O0.06‐Li3N glass–ceramic electrolyte (GCE) is developed, wherein O and N substitution produce POS33– and Li3N unique functional units enable superior σLi+ 1.58 mS cm–1 at RT. Notably, POS33– units in Li2.96P0.98S3.92O0.06‐Li3N excellently prevent the structural degradation against moisture @45–50%. The critical current density of Li2.96P0.98S3.92O0.06–Li3N reaches 1 mA cm–2/1 mAh cm–2 @ RT. Moreover, Li//Li cells realize unprecedented Li‐plating/stripping >1000 h at 0.3 mA cm–2/0.3 mAh cm–2 and 0.5 mA cm–2/0.5 mAh cm–2 at RT. ToF‐SIMS and depth‐X‐ray photoelectron spectroscopy (XPS) confirm the formation of Pre‐solid‐electrolyte interphase (SEI) enriched with thermodynamically stable Li2O and Li3N species at Li/Li2.96P0.98S3.92O0.06–Li3N interface, suppressing the interfacial reactions and growth of Li‐dendrites inside Li2.96P0.98S3.92O0.06–Li3N. Furthermore, LiNbO3@NCA/Li2.96P0.98S3.92O0.06–Li3N/Li cells deliver a remarkable initial discharge capacity of 177.3, 177.6, and 177.8 mAh g–1 with 7.50, 16.50, and 21.50 mg cm–2 of NCA loading. Thus, the novel Li2.96P0.98S3.92O0.06–Li3N GCE addresses all key challenging issues and has tremendous potential to be used in sulfide‐based high‐energy ASSLMBs.

Bifunctional Interphase-Enabled Li<sub>10</sub>GeP<sub>2</sub>S<sub>12</sub> Electrolytes for Lithium-Sulfur Battery

Bifunctional Interphase-Enabled Li 10 GeP 2 S 12 Electrolytes for Lithium–Sulfur Battery

Integrating Lithium Sulfide as a Single Ionic Conductor Interphase for Stable All-Solid-State Lithium-Sulfur Batteries

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Stable Cycling Lithium-Sulfur Solid Batteries with Enhanced Li/Li10GeP2S12 Solid Electrolyte Interface Stability

A Deformable Dual-Layer Interphase for High-Performance Li10GeP2S12-based Solid-State Li Metal Batteries

Achieving Higher Critical Current Density in LGPS-Based Lithium Metal Batteries via a Synergistic Interlayer for Physical Inhibition and Chemical Scavenging of Lithium Dendrites

Interface Re-Engineering of Li10GeP2S12 Electrolyte and Lithium anode for All-Solid-State Lithium Batteries with Ultralong Cycle Life

Stabilizing Li4SnS4 Electrolyte from Interface to Bulk Phase with a Gradient Lithium Iodide/Polymer Layer in Lithium Metal Batteries

Fast and Stable Charge Transfer at Lithium-Sulfide (Electrolyte) Interface via In-Situ Solidified Li+-Conductive Interlayer

Robust Li6PS5I Interlayer to Stabilize the Tailored Electrolyte Li9.95SnP2S11.95F0.05/Li Metal Interface.

Cross-Linked Polyamide-Integrated Argyrodite Li6PS5Cl for All-Solid-State Lithium Metal Batterie

Manipulating Electrolyte and Solid Electrolyte Interphase to Enable Safe and Efficient Li-S Batteries

Constructing Stable Anodic Interphase for Quasi-Solid-State Lithium–Sulfur Batteries

Atom Substitution of the Solid-State Electrolyte Li10GeP2S12 for Stabilized All-Solid-state Lithium Metal Batteries

A Dynamically Stable Mixed Conducting Interphase for All‐Solid‐State Lithium Metal Batteries

In Situ Polymerization Bi‐Functional Gel Polymer Electrolyte for High Performance Quasi‐Solid‐State Lithium−Sulfur Batteries

Bifunctional in Situ Polymerized Interface for Stable LAGP‐Based Lithium Metal Batteries

Thin, flexible sulfide-based electrolyte film and its interface engineering for high performance solid-state lithium metal batteries

An in Situ-Formed LiI Interface Layer for Garnet-Based Lithium Metal Batteries

Design Unique Air‐Stable and Li–Metal Compatible Sulfide Electrolyte via Exploration of Anion Functional Units for All‐Solid‐State Lithium–Metal Batteries