Abstract:Proton-conducting solid oxide cells (P-SOCs), which can switch flexibly between operating as fuel cells (FCs) and operating as electrolysis cells (ECs), are deemed as a promising device that can highly efficiently realize the energy conversion between electrical power and chemical energy (e.g., hydrogen energy). Exploring an effective way to accelerate the sluggish reactions on air electrodes, including proton involved oxygen reduction reactions in FCs and steam electrolysis reactions in ECs, is of key importance to improve the electrochemical performance of P-SOCs. In this work, K doped Sr2Fe1.5Mo0.5O6-δ (K0.25Sr1.75Fe1.5Mo0.5O6-δ, KSFM) is prepared and investigated as a potential air electrode for P-SOCs. Here, K dopant which has higher basicity and larger ionic radius than Sr2+ is used to modulate the physical and chemical performance of air electrodes, and thus to improve their reaction kinetics. Compared with that taking SFM, improving factors of 53.3% and 93.4% at 600°C are achieved for the cell using K doped SFM air electrode operating in FC and EC mode, respectively. Density functional theory (DFT) calculations reveal that K can make the oxygen p-band center closer to the Fermi level, reducing the formation energy of oxygen vacancies; and meanwhile, it improves the hydration energy of SFM and reduces the energy barrier for proton migration. It is also found K could enhance the interaction between the surfaces and steam, yet the lower adsorption energy of steam compared to that of O2 would not isolate the O2 adsorption reaction. K doping is a rational way to design new air electrodes for P-SOCs.

Theoretical and Experimental Investigations on K-doped SrCo<sub>0.9</sub>Nb<sub>0.1</sub>O<sub>3-<i></i></sub> as a Promising Cathode for Proton-Conducting Solid Oxide Fuel Cells

Theoretical and Experimental Investigations on K‐doped SrCo 0.9 Nb 0.1 O 3‐ δ as a Promising Cathode for Proton‐Conducting Solid Oxide Fuel Cells

Evaluation of SrSc0.175Nb0.025Co0.8O3-δ Perovskite As a Cathode for Proton-Conducting Solid Oxide Fuel Cells: the Possibility of in Situ Creating Protonic Conductivity and Electrochemical Performance

Evaluation of A-site deficient Sr1−xSc0.175Nb0.025Co0.8O3−δ (x=0, 0.02, 0.05 and 0.1) perovskite cathodes for intermediate-temperature solid oxide fuel cells

Electrochemical Performance and Effect of Moisture on Ba0.5Sr0.5Sc0.175Nb0.025Co0.8O3-δ Oxide As a Promising Electrode for Proton-Conducting Solid Oxide Fuel Cells

A Superior Catalytic Air Electrode with Temperature-Induced Exsolution Toward Protonic Ceramic Cells.

A novel Nb and Cu co-doped SrCoO<sub>3-</sub> cathode for intermediate temperature solid oxide fuel cells

A New Highly Active and CO2-stable Perovskite-Type Cathode Material for Solid Oxide Fuel Cells Developed from A- and B-site Cation Synergy

A New Bi-Directional Surface Modification Cathode Based on Conventional Cathode La0.6Sr0.4Co0.2Fe0.8O3-δ

K doping as a rational method to enhance the sluggish air-electrode reaction kinetics for proton-conducting solid oxide cells

High-Performance Srnb0.1co0.9-Xfexo3-Delta Perovskite Cathodes For Low-Temperature Solid Oxide Fuel Cells

High-performance and CO2‐resistant cathode toward electrocatalytic oxygen reduction for solid oxide fuel cells: Doped ceria and SrCo0.7Nb0.1Ni0.2O3-δ composite

High-performance Phosphorus-Doped SrCo0·8Fe0·2O3-δ Cathode for Protonic Ceramic Fuel Cells

Application of Lattice Expansion Effect in SrCoO3 Based Cathodes by Ba Doping with Elevated Electrochemical Performances for Low-Temperature Solid Oxide Fuel Cells

Investigation and Study of Three Different Composite Cathodes for Proton-Conducting Solid Oxide Fuel Cells

Computational Design and Experimental Validation of the Optimal Bimetal-Doped SrCoO 3−δ Perovskite as Solid Oxide Fuel Cell Cathode

B-site high-entropy tailoring K2NiF4 oxide as an effective cathode for proton-conducting solid oxide fuel cells

Structural, electrical and electrochemical characterizations of SrNb0.1Co0.9O3−δ as a cathode of solid oxide fuel cells operating below 600°C

A CO2-tolerant SrCo(0.8)Fe(0.15)Zr(0.05)O(3-delta)cathode for proton-conducting solid oxide fuel cells

Nb5+-Doped SrCoO3-δ Perovskites as Potential Cathodes for Solid-Oxide Fuel Cells

A CO2-tolerant SrCo0.8Fe0.15Zr0.05O3−δ cathode for proton-conducting solid oxide fuel cells