Abstract:The concentration conditions for the deposition of lead sulfide and hydroxide in a citrate-ammonia reaction system by varying the pH value and the concentration of the ammonium iodide dopant are calculated. Kinetic studies of the process of conversion of lead salt into sulfide by varying the concentration of NH4I in solution within the range of 0.0-0.4 M show an inhibitory effect of ammonium iodide, which reduces the constant of the effective rate of the conversion process by almost 20 times. Thin films of lead sulfide with a thickness of 100 to 650 nm are synthesized by chemical bath deposition in the presence of NH4I on sitall and glass substrates. The introduction of NH4I into the reaction mixture decreases the size of crystallites forming the films and increases the fraction of nanoparticles to 17%. The films deposited during 90 min contain 48.5-51.7 at% of lead, 47.4-47.9 at% of sulfur, and up to 3.7 at% of iodine; the content of iodine can reach 17.1 at% in the initial period of deposition (after 20 min of deposition). The calculated fractal dimension of the surface of the iodine-doped PbS(I) films (Dc = 2.04-2.14) corresponds to the process of film formation by the cluster-cluster aggregation mechanism with small sticking probability (reaction-limited cluster aggregation model (RLCA)). According to the X-ray diffraction data, the PbS(I) films have a cubic structure of the NaCl (B1) type; an increase in the concentration of NH4I in the solution results in an increase in the lattice parameter from 0.59315(1) to 0.59442(3) nm, which is probably due to the substitution of sulfur ions for iodine ones. According to optical studies, the introduction of ammonium iodide into the reaction mixture leads to a shift of the absorption edge to the high-energy region and the appearance of an additional (impurity) band. The PbS films deposited in the presence of NH4I do not require additional photosensitization operations and show a relatively high volt-watt sensitivity to IR radiation at anomalously small values of the time constant.

Formation of lead iodide nanoparticles using the sol–gel method and their applications

Synthesis and Room Temperature Photo Luminescence of Agi Nanoparticles Embedded in Silica Sol-Gel Coating

Surface Synthesis of PbS Nanoparticles on Silica Spheres by a Sonochemical Approach

Pioneering method for the synthesis of lead sulfide (PbS) nanoparticles using a surfactant-free microemulsion scheme

The influence of iodide addition on the composition, morphology, crystal structure, and semiconductor and photoelectric properties of PbS films

Morphology-controlled Synthesis of Lead Iodine Compounds from Lead Foils and Iodine

Electron-Irradiation Induced Nanocrystallization of Pb(II) in Silica Gels Prepared in High Magnetic Field

Silica coating of indium phosphide nanoparticles by a sol–gel method and their photobleaching properties

In Situ Formation of Iodide Precursor for Perovskite Quantum Dots with Application in Efficient Solar Cells

Formation and Near-Infrared Emission of CsPbI3 Nanoparticles Embedded in Cs4PbI6 Crystals

Size-Tunable Near-Infrared Pbs Nanoparticles Synthesized From Lead Carboxylate And Sulfur With Oleylamine As Stabilizer

A facile hydrothermal synthesis route to single-crystalline lead iodide nanobelts and nanobelt bundles.

A Sol–gel Method to Synthesize Indium Tin Oxide Nanoparticles

Solution grown PbS nanoparticle films

Orientation-Controlled Large-Area Epitaxial PbI2 Thin Films with Tunable Optical Properties

Effect of synthesis routes for preparation of lead sulphide quantum dots based thin films by spin coating technique

Study on PbS/SiO2 Quantum-Dot-Glass Prepared by Sol-Gel Method

Preparation of Inorganic Nanoparticles/Polyimide Hybrid Film by Sol Gel Method

Synthesis And Characterization Of Silica-Coated Iron Oxide Nanoparticles In Microemulsion: The Effect Of Nonionic Surfactants

Sol-gel Synthesis and Photoluminescence of InP Nanocrystals Embedded in Silica Glasses

Lead Chalcogenide Nanoparticles and Their Size-Controlled Self-Assemblies for Thermoelectric and Photovoltaic Applications