Abstract:Effect of varying surface structures of the inner rotating cylinder on characteristics of droplet formed in a liquid-liquid Taylor-Couette (TC) reactor is investigated. Two novel surface structures of inner cylinders, designed with axially corrugated surface (N40) and with typical three-dimensional roughness (NZ40), respectively, were adopted for the investigation. The high-speed camera visualization was used to measure the droplet size while CFD modelling was applied to predict the fluid dynamics of TC flows with such two inner cylinders and a smooth surface inner cylinder, thus revealing the effect of inner cylinder configuration on the droplet formation in the TC flows. The experimental results have clearly indicated that both the rotation speed and surface configuration variation of the inner cylinders affect the generated droplet size and distribution. As the rotation speed increases, the droplet size is obviously reduced for all types of inner cylinder configurations. Compared with the conventional smooth surface inner cylinder, the two new types of inner cylinders with special surface structures can produce much smaller droplets, especially for the case of N40 surface structure inner cylinder, with which the smallest droplet size was found at all the experimental conditions. CFD modelling results have demonstrated that the surface configurations of inner cylinder can significantly affect the turbulence generation, consequently altering the distributions of turbulent kinetic energy and local turbulence shear strain rate. As a result, the droplet size was found to be controlled by the change of the local turbulent dissipation rate that was strongly associated with the surface structures of inner cylinders. Empirical correlations that correlate the droplet size with the Weber number and Reynolds number were proposed based on the high-speed camera visualization data.(c) 2022 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http:// creativecommons.org/licenses/by/4.0/).

Interfacial Evolution and Dynamics of Liquid Bridge During Droplet Coalescence in Rectangular Microchannels: Effect of Aspect Ratio

EFFECTS OF INLET ARRANGEMENTS ON LIQUID-LIQUID FLOW PATTERNS IN CROSS-JUNCTION SQUARE MICROCHANNELS

Effect of Inner Cylinder Configuration on Liquid Droplet Dispersion and Size Distributions in a Taylor-Couette Reactor

Coalescence Law of Microdroplet Swarms in Microchannels

Microdroplet Coalescences at Microchannel Junctions with Different Collision Angles

Inner circulation flow characteristics of coalescence droplets in microchannel

Dynamics of droplet adsorption at the liquid-liquid interface of parallel flow in a microchannel

Effects of Two-Phase Periodic Velocity on Droplet Coalescence Inside Microchannels

Numerical Study on the Liquid-Liquid Interface Evolution during Droplet Coalescence

Controllable Droplet Coalescence in the T-Junction Microchannel with a Funnel-Typed Expansion Chamber

Coalescence of immiscible droplets in liquid environments

Interface‐shrinkage‐driven Breakup of Droplets in Microdevices with Different Dispersed Fluid Channel Shape

Dynamics of Bubble Formation in Highly Viscous Liquid in Co-Flowing Microfluidic Device

Dynamic breakup of Janus droplet in a bifurcating microchannel

Probing the coalescence of non-Newtonian droplets on a substrate

Interaction and breakup of droplet pairs in a microchannel Y-junction

Effect of interface deformation on hydrodynamics of liquid–liquid two-phase flow in a confined microchannel

Mechanism of temporal interface evolution and internal circulations during the droplet formation in a planar slit T-microchannel

Droplet behavior and its effects on flow characteristics in T-junction microchannels

Liquid flow and interface evolution near the contact line during droplet coalescence

Study on “interface – Shrinkage – Driven” Breakup of Droplets in Co-Flowing Microfluidic Devices