Abstract:All-inorganic CsPbBr3 perovskite solar cells (PSCs) have attracted tremendous attentions in the photovoltaic field these days in view of their outstanding stability, especially thermal stability. However, the bromide-rich perovskite, such as CsPbBr3, always suffer from a low phase-purity and poor morphology synthesized by traditional two-step deposition route. Herein, we demonstrate a facile multistep spin-coating strategy to fabricate high-quality CsPbBr3 films on the low-temperature processed compact TiO2 (c-TiO2) electron transport layer (ETL) of the carbon-based PSCs. As-prepared films exhibit more homogeneous with higher CsPbBr3-phase purity and larger average grain sizes up to 1 mu m, compared to those prepared through traditional two-step deposition process. The champion power conversion efficiency (PCE) of the planar CsPbBr3 PSC is boosted from 7.05% to 8.12%, getting an increase by 15.2%, due to the increased crystallinity and light-harvesting ability as well as reduced trap states of the CsPbBr3 film. To further enhance the device performance, a SnO2 thin layer with much higher carrier mobility than TiO2 is introduced to passivate the c-TiO2 ETL. It is found that the SnO2 layer can not only improve the surface morphology of the ETL, but also reduce the current shunting pathways in the c-TiO2. The TiO2/SnO2 bilayered ETL possesses a superior electron extraction capability, beneficial to the charge transport and suppression of the interfacial trap-assisted recombination. The best-performing TiO2/SnO2-based CsPbBr3 PSC delivers an excellent fill factor of 0.817 and a high PCE of 8.79%, which is the highest efficiency for planar CsPbBr3 PSCs reported to date. More importantly, the unencapsulated all-inorganic PSCs show a promising humidity and thermal stability with no decline in efficiency when stored in ambient air at room temperature (25 degrees C) for over 1000 h and 60 degrees C for one month, respectively. Our work pave the ways for practical applications of cost-effective, highly efficient and stable all-inorganic PSCs.

High‐Performance Planar Heterojunction Perovskite Solar Cells Based on BaCl2 Additive and Power Conversion Efficiency of over 21%

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Stable Hole-Free, Carbon-Based CsPbI3 Perovskite Solar Cells Achieving 12.45 %-Efficiency at a Low Temperature with Mn Doping and Excess CsBr Simultaneously

Ultrahigh Fill-Factor All-Inorganic CsPbBr3 Perovskite Solar Cells Processed from Two-Step Solution Method and Solvent Additive Strategy

Improved Photovoltaic Performance of CsPbI2Br Perovskite Films Via Bivalent Metal Chloride Doping

High-Performance Simple-Structured Planar Heterojunction Perovskite Solar Cells Achieved by Precursor Optimization.

High Efficiency Quasi‐2D/3D Pb–Ba Perovskite Solar Cells via Phenethylammonium Chloride Addition

Stable Power Output (PCE > 19%) of Planar Perovskite Solar Cells with PbCl2 Modification at the Interface of SnO2/CH3NH3PbI3

Multistrategy Toward Highly Efficient and Stable CsPbI2Br Perovskite Solar Cells Based on Dopant‐Free Poly(3‐Hexylthiophene)

Multistrategy Toward Highly Efficient and Stable CsPbI 2 Br Perovskite Solar Cells Based on Dopant‐Free Poly(3‐Hexylthiophene)

Controllable Perovskite Crystallization via Antisolvent Technique Using Chloride Additives for Highly Efficient Planar Perovskite Solar Cells

Boosting the Efficiency of Carbon-Based Planar CsPbBr3 Perovskite Solar Cells by a Modified Multistep Spin-Coating Technique and Interface Engineering

Over 23% Power Conversion Efficiency of Planar Perovskite Solar Cells Via Bulk Heterojunction Design

Enhanced Planar Perovskite Solar Cell Performance via Contact Passivation of TiO2/Perovskite Interface with NaCl Doping Approach

High-Performance and Stable Mesoporous Perovskite Solar Cells Via Well-Crystallized FA0.85MA0.15Pb(I0.8Br0.2)3.

CsPbBr3 Perovskite Nanoparticles As Additive for Environmentally Stable Perovskite Solar Cells with 20.46% Efficiency

Compositional Engineering of Chloride Ion‐Doped CsPbBr3 Halides for Highly Efficient and Stable All‐Inorganic Perovskite Solar Cells

Synergistic Strategy of Rubidium Chloride Regulated Sno2and 4-Tert-butyl-benzylammonium Iodide Passivated Maxfa1-Xpbi3 for Efficient Mixed-Cation Perovskite Solar Cells

High‐Efficiency Carbon‐based CsPbI2Br Perovskite Solar Cells from Dual Direction Thermal Diffusion Treatment with Cadmium Halides

Multifunctional Brominated Graphene Oxide Boosted Charge Extraction for High-Efficiency and Stable All-Inorganic CsPbBr3 Perovskite Solar Cells

Tri‐Brominated Perovskite Film Management and Multiple‐Ionic Defect Passivation for Highly Efficient and Stable Solar Cells