Pressure Sensitivity Of A Ruthenium Complex Based Temperature-Sensitive Paint And Its Effect On Heat Flux Determination In High-Speed Flows

Xu Liu,Feng Gu,Yingzheng Liu,Di Peng
DOI: https://doi.org/10.1088/1361-6501/abff82
IF: 2.398
2021-01-01
Measurement Science and Technology
Abstract:This paper investigates the pressure sensitivity of a temperature-sensitive paint (TSP) which uses a clear coat as binder and the Ru(dpp) as luminophore, and then discusses its effect on heat flux determination. Systematic static calibrations of three TSP samples with different thicknesses (7.5 mu m, 10.3 mu m and 13.1 mu m) are carried out in a temperature range of 298 K to 373 K and a pressure range of 3.8 kPa to 15.2 kPa. Besides, dynamic pressure response calibrations are performed from 298 K to 373 K. The static calibration results show a significant growth in the pressure sensitivity as the temperature increases. For example, the pressure sensitivity of the 10.3 mu m thick TSP at 3.8 kPa grows from 0.086% kPa(-1) to 0.412% kPa(-1) as the temperature rises from 298 K to 373 K. The dynamic calibration results show that the pressure response time is in the order of seconds, which decreases significantly with both the temperature and the paint thickness. For example, the pressure response time of the 10.3 mu m thick TSP decreases from 11.55 s to 0.68 s as the temperature increases from 298 K to 373 K. The calibration results suggest that the pressure sensitivity of TSP would lead to noticeable temperature and heat flux errors in high-speed, long-duration wind tunnel tests. This pressure-induced effect is evaluated for three TSP samples by the simulations with varying local pressure and heat flux. The results show that the heat flux error increases as the paint thickness reduces because of faster pressure response. The error increases with the local pressure as expected, but it shows a negative correlation to the local heat flux.
What problem does this paper attempt to address?