Abstract:Two evaluation indexes were proposed to select the optimal PSP for unsteady pressure measurement from various PSPs with different pressure sensitivity and frequency response. An effective sensitivity coefficient calculated by pressure sensitivity and gain attenuation due to the response delay was proposed. Furthermore, an effective amount of intensity change was recommended, which takes into account the emission intensity and the effective sensitivity coefficient, because the magnitude of the intensity of a PSP is also important for unsteady-pressure measurement with high-speed sampling. A total of five types of PC-PSPs developed in previous studies were compared: two types of fast-response PC-PSPs using Pt(II) meso-tetra (pentafluorophenyl) porphine (PtTFPP) with poly(isobutyl methacrylate) (poly(IBM)) and ruthenium complex with RTV silicone, respectively, and three types of PC-PSPs using PtTFPP with poly[1-trimethylsilyl)-1-propyne] (poly(TMSP)). A comparison was made using the proposed evaluation indexes under various pressure ranges. The results showed that poly(TMSP)-based PC-PSP has a high effective sensitivity coefficient at pressures less than 20 kPa. On the other hand, poly(IBM)-based PC-PSP has the highest effective sensitivity coefficient at a pressure of 100 kPa. The effective amount of intensity change of poly(TMSP)-based PC-PSP is the highest at 2 kPa, but that of poly(IBM)-based PC-PSP is the highest at a pressure higher than 5 kPa among the evaluated PC-PSPs due to its high luminescence intensity. A PSP with high emission intensity will provide high performance in terms of fluctuation of emission intensity detected by the photodetector when the excitation intensity and the exposure time are limited due to limitations of optical equipment or high-speed sampling.

Dual-luminophore fast-responding pressure-sensitive paint for the simultaneous elimination of motion- and temperature-induced errors

Temperature-Independent Pressure-Sensitive Paint Based On A Bichromophoric Luminophore

Temperature Sensitivity Elimination in Sprayable Fast-Responding Pressure-Sensitive Paint

Pressure-sensitive Paint with Imprinted Pattern for Full-Field Endoscopic Measurement Using a Color Camera

Integration of Pressure-Sensitive Paint with Persistent Phosphor: A Light-Charged Pressure-Sensing System.

Frequency Response of Pressure-Sensitive Paints under Low-Pressure Conditions

Indexes for Evaluation of Dynamic Characteristics of Pressure-Sensitive Paint based on Pressure Sensitivity and Frequency Response

A Grid-Pattern PSP/TSP System for Simultaneous Pressure and Temperature Measurements

The Development and Application of Two-Color Pressure-Sensitive Paint in Jet Impingement Experiments

Polymer-Particle Pressure-Sensitive Paint with High Photostability

Characterization of Pressure-Sensitive Paint Based on Mesoporous Silica Particles under Near-Vacuum Conditions

A Dual-Camera Single-Shot Lifetime Method with Fully Controllable Exposure Gates for Pressure-Sensitive Paint Measurements on Fast-Rotating Surfaces

A Novel Laminated OLED–PSP System for Measurement on Moving Surfaces

Thermal Stability Improvement of Sprayable Fast-Responding Pressure-Sensitive Paint for Measurement above 100 °C

Applications of Pressure-Sensitive Paint Technique

A fast-responding semi-transparent pressure-sensitive paint based on through-hole anodized aluminum oxide membrane

A novel sprayable fast-responding pressure-sensitive paint based on mesoporous silicone dioxide particles

Suppression of thermal quenching in fast-responding pressure-sensitive paint by restricting lattice relaxation of luminescent molecules

Pressure-sensitivity Stability of Poly[1-(Trimethylsilyl)-1-propyne]-based Pressure-Sensitive Paint for Low-Pressure Conditions

Simultaneous 3D Surface Profile and Pressure Measurement Using Phase-Shift Profilometry and Pressure-Sensitive Paint.

Synthesis of cationic ruthenium complex-loaded reverse polymer micelles and application for two-color pressure and temperature sensing