Abstract:In monolithic precast concrete structures, the connection between precast components with extended reinforcing bars usually encounters problems regarding conflicts in reinforcement placement. In particular, the problem of reinforcement conflicts is more prominent for precast slabs in China. In order to solve reinforcement conflicts encountered during practical construction, a novel connecting approach for precast members is proposed. This new approach involves setting notches at the end of precast components and anchoring reinforcing bars at the specially designed notches. This new approach ensures that the structural performance of the joints for precast members is similar to that of cast-in-place structures while minimizing the protrusion of reinforcement at the end of the member. In order to investigate the force transfer mechanism of the proposed method and its applicability to precast slabs, a total of 54 specimens with and without notches are designed and tested using pull-out experiments. Based on the experimental analysis, it is found that the existence of the new-to-old concrete interface changes the anchorage strength of steel bars in the notches. The effect of new-to-old concrete interface on the bond strength of steel bars and the desirable anchorage length of steel bars at the concrete interface are analyzed. The influences of steel bar diameter, anchorage length, concrete strength and reinforcement ratio of the concrete cover on the structural performance are discussed and compared in depth. Through the experimental results, the main factors affecting the bond strength of steel bar anchorage in the notched connection are identified. The physical mechanism of force transfer of the proposed method is developed and described. Preliminary calculation and design methods are presented to guide the practical application of the proposed method and to further facilitate the construction process of the precast structures.

Novel Adhesive Anchoring System Through Engineered Adhesive-Concrete Interface

EXPERIMENTAL RESEARCH ON NOTCHED CONNECTION FOR GLUBAM-CONCRETE COMPOSITE BEAMS

EXPERIMENT ON CHEMICAL ATTACHMENT OF ANCHOR DEFORM DEPTH 110 MM CAST-IN PLACE AND POST-INSTALLED DRILL BIT EXTRACTOR METHOD

Effect of anchorages on C-FRCM/concrete interfacial shear performance

Elastic Analysis of and Design Recommendation for Chemical Adhesive Anchors

Consistent time-to-failure tests and analyses of adhesive anchor systems

Enhancing the interfacial bond performance of engineered cementitious composites and concrete

Experimental and Numerical Study of Corrugated Anchors for CFRP Plates

Design optimization and experimental validation of a novel wedge-shaped bond anchorage system for prestressed CFRP plates

Tensile Properties of Bonded-metal-anchor Group for Post-installed Fastenings in Concrete Structures

Behavior of FRP-engineered cementitious composite layer and concrete interface with FRP anchors

Novel Wedge-Shaped Bond Anchorage System for Pultruded CFRP Plates

Experimental Study on Bond and Anchorage of Steel Bars in Precast Concrete Structures with New-to-old Concrete Interface

Uniaxial Tensile Behavior of Anchored Carbon Fabric-Reinforced Cementitious Matrix Plates

Experimental investigation and analytical prediction on bond behaviour of CFRP-to-concrete interface with FRP anchors

Behaviour and in Situ Tests of Self-Drilling Prestressed Anchors

Analytical study on the behavior of CFRP-concrete bonded joint with a non-rigid end-anchor

Experimental and analytical study of flexural behaviour of BFRP sheets strengthened RC beams with new epoxy anchors

Experiment Program on Retrofitted Anchorage System under Impact Loads

Experimental Study on FRP-to-Concrete Bonded Joints with FRP Sheet Anchor System

Mechanically Interlocked [an]Daisy Chain Adhesives with Simultaneously Enhanced Interfacial Adhesion and Cohesion