Abstract:Development of nonprecious metal catalysts for oxygen reduction reaction (ORR) to reduce or eliminate Pt-based electrocatalysts is of great importance for fuel cells. Herein, Co/N-codoped carbon with carbon nanofiber (CNF) interconnected three-dimensional (3D) frameworks and graphitic carbon-encapsulated Co nanoparticles were designed and successfully prepared via the in situ growth of zeolitic imidazolate framework-67 (ZIF67) with biomass nano-microfibrillar cellulose (MFC) and then pyrolysis. The catalyst (Co/) exhibited outstanding long-term catalytic durability with 92.7% current retention after 70 000 s, which was much higher than that of commercial Pt/C in alkaline media. The support and connection of CNFs to Co/N-C frameworks and the protection of Co nanoparticles by graphite layers contribute to their impressive long-term catalytic stability. Meanwhile, Co/ displayed excellent ORR catalytic performance (E0 = 0.952 V vs RHE, E1/2 = 0.852 V vs RHE, and n: 4.2) in alkaline media. This strategy provides new insights into developing advanced nonprecious metal carbon-based catalysts for ORR.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c12069?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c12069</a>.High-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and the corresponding element distribution maps (a,b) of Co/N-C; Raman spectra of Co/N-C, Co/, and CNFs; N2 adsorption/desorption isotherms and H–K pore size distributions (inset: BJH pore size distributions) of ZIF67 and ; LSV curves and K–L plots of Co/N-C (a,b) in 0.1 M KOH at 10 mV s–1; I–t chronoamperometric response of Co/N-C, Co/, and Pt/C 20% with 1600 rpm rotation speed in 0.5 M H2SO4 for 10 000 s (a) and I–t chronoamperometric response of Co/N-C and Co/ with a rotation speed of 1600 rpm in O2-bubbled 0.5 M H2SO4 for 70 000 s (b); elemental composition of the as-prepared samples tested by XPS and Co content determined by ICP (Table S1); comparison of ORR activity and stability between Co/ and other reported electrocatalysts (Table S2) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12069/suppl_file/am0c12069_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Co2P Embedded in Nitrogen-Doped Carbon Nanoframework Derived from Co-based Metal-Organic Framework As Efficient Oxygen Reduction Reaction Electrocatalyst for Enhanced Performance of Activated Carbon Air-Cathode Microbial Fuel Cell

Cobalt‑nitrogen‑carbon Nanotube Co-Implanted Activated Carbon As Efficient Cathodic Oxygen Reduction Catalyst in Microbial Fuel Cells

Engineering heterostructured Co0.7Fe0.3@Co doped leaf-like carbon nanoplates from dual metal-organic frameworks for high-efficiency oxygen reduction reaction in microbial fuel cell

Highly efficient charge transfer in Co/Co2P Schottky junctions embedded in nitrogen-doped porous carbon for enhancing bioelectricity generation

Bimetallic zeolitic imidazole framework derived Co@NC materials as oxygen reduction reaction catalysts application for microbial fuel cells

Hollow-spherical Co/N-C nanoparticle as an efficient electrocatalyst used in air cathode microbial fuel cell

String of ZIF-derived hollow beaded nanocage embedded into carbon nanofiber with intensified exposed Co-N x sites for efficient oxygen catalysis in various fuel cell devices

Ordered porous nitrogen-doped carbon with atomically dispersed FeN 4 for efficient oxygen reduction reaction in microbial fuel cell

Improvement of oxygen reduction capacity by activated carbon doped with broccoli-like Co-Ni2P in microbial fuel cells

High power density output and durability of microbial fuel cell enabled by dispersed cobalt nanoparticles on nitrogen-doped carbon as cathode electrocatalyst

Co-CoO-Co3O4/N-doped carbon derived from metal-organic framework: The addition of carbon black for boosting oxygen electrocatalysis and Zn-Air battery

Nanopolyhedral Zn/Fe-NC derived from bimetallic zeolitic imidazole frameworks as an efficient catalyst for the oxygen reduction reaction in an air-cathode microbial fuel cell

ZIF67@MFC-Derived Co/N-C@CNFs Interconnected Frameworks with Graphitic Carbon-Encapsulated Co Nanoparticles as Highly Stable and Efficient Electrocatalysts for Oxygen Reduction Reactions

High-performance oxygen reduction electrocatalysts derived from bimetal-organic framework and sulfur-doped precursors for use in microbial fuel cells

Nitrogen-doped porous carbon fiber with enriched Fe2N sites: Synthesis and application as efficient electrocatalyst for oxygen reduction reaction in microbial fuel cells

ZIF-8/ZIF-67-Derived Co-N-x-Embedded 1D Porous Carbon Nanofibers with Graphitic Carbon-Encased Co Nanoparticles As an Efficient Bifunctional Electrocatalyst

Metal–Organic Frameworks-Derived Core/Shell Porous Carbon Materials Interconnected by Reduced Graphene Oxide as Effective Cathode Catalysts for Microbial Fuel Cells

Ordered mesoporous carbon with atomically dispersed Fe-Nx as oxygen reduction reaction electrocatalyst in air-cathode microbial fuel cells

ZIF67-ZIF8@MFC-Derived Co-Zn/NC Interconnected Frameworks Combined with Perfluorosulfonic Acid Polymer as a Highly Efficient and Stable Composite Electrocatalyst for Oxygen Reduction Reactions

In Situ Anchoring of Zeolite Imidazole Framework-Derived Co, N-Doped Porous Carbon on Multiwalled Carbon Nanotubes Toward Efficient Electrocatalytic Oxygen Reduction

Activated nitrogen-doped carbon nanofibers with hierarchical pore as efficient oxygen reduction reaction catalyst for microbial fuel cells