Abstract:Improving the catalyst stabilities under different conditions (water vapor, SO2, both water vapor and SO2) is important for industrial applications regarding catalytic NO deep oxidation by ozone. In this paper, Ce–Mn/SA and Fe–Mn/SA catalysts were selected to investigate the stabilities. The results showed that the Ce–Mn/SA exhibited excellent stability and resistance to SO2, while the Fe–Mn/SA only displayed excellent stability without moisture and SO2. Almost a 50% drop in efficiency was observed after deactivation by water vapor and water vapor together with SO2 for the two catalysts. The Fe–Mn/SA displayed inferior resistance to SO2. After stability testing with water vapor, the surface area, pore volume, and average pore diameter all decreased. The low adsorption energy of the H2O molecule resulted in the superior adsorption of water vapor, which occupied large amounts of active sites. XPS results showed that the ratio of Mn4+ and chemisorbed oxygen decreased after deactivation. Mn4+ favors NO oxidation, while Mn3+ is favorable for ozone decomposition. Therefore, better performance in NO deep oxidation by ozone requires relative balance distribution between Mn4+ and Mn3+. Interestingly, the TPD results showed that the NO desorption peak was unaffected and even increased a lot after water vapor stability testing. This could be attributed to the nitrates, formed by the N2O5 and H2O in liquid phase, that were adsorbed on the catalyst surface prior to NO, which contributes to a bigger NO desorption peak with lower NO adsorption ability. The trace of sulfate formed after SO2 stability testing was verified from TPD and TGA results, but it was not observed from the FTIR spectra, indicating the sulfate species formed during the ozonation process may not exist on the catalyst surface.

Enhanced Activity and Water Tolerance Promoted by Ce on MnO/ZSM-5 for Ozone Decomposition.

Ce–Fe–Mn Ternary Mixed-Oxide Catalysts for Catalytic Decomposition of Ozone at Ambient Temperatures

Cerium-modified Amorphous Manganese Oxides for Efficient Catalytic Removal of Ozone

Novel CeMnaOx catalyst for highly efficient catalytic decomposition of ozone

Efficient Ozone Elimination over MnO2 Via Double Moisture-Resistance Protection of Active Carbon and CeO2

Synergetic Degradation of VOCs by Vacuum Ultraviolet Photolysis and Catalytic Ozonation over Mn-xCe/ZSM-5.

Enhancing Oxygen Vacancies of Ce-OMS-2 via Optimized Hydrothermal Conditions to Improve Catalytic Ozone Decomposition

Efficient Ozone Elimination Over MnO 2 via Double Moisture-Resistance Protection of Active Carbon and CeO 2

Promoting Metal Oxides–zeolite Electron Interaction on MnCeOx/HY Catalyst for Boosting Nitrogen Oxides Reduction

Enhanced Ozonation of Polystyrene Nanoplastics in Water with CeOx@MnOx Catalyst.

Ethanol-thermal synthesis of colloidal-CeFeMn mixed-oxide as efficient catalytic material for atmospheric ozone decomposition

e to SO 2 and water vapor of Mn based bimetallic oxides for NO deep oxidation by ozone

Catalytic Decomposition of Gaseous Ozone over Todorokite-Type Manganese Dioxides at Room Temperature: Effects of Cerium Modification

Synergistic mechanism of Ce-Mn in ZSM-5 carrier catalysts for catalytic oxidation of toluene

Removing Surface Hydroxyl Groups of Ce-Modified MnO2 to Significantly Improve Its Stability for Gaseous Ozone Decomposition

Simultaneously Catalytic Decomposition of Formaldehyde and Ozone over Manganese Cerium Oxides at Room Temperature: Promotional Effect of Relative Humidity on the MnCeOx Solid Solution

Catalyst Tolerance to SO2 and Water Vapor of Mn Based Bimetallic Oxides for NO Deep Oxidation by Ozone

Enhanced catalytic performance for toluene combustion via Ce-doped α-MnO2: efficient balance between toluene adsorption and activation oxidation

Mn–Ce Bicenter of a Dual Single-Atom Catalyst Synergistically Triggers Reactive Oxygen Species Generation for Efficient Ozonation of Emerging Contaminants

Manipulation of Mn/Ce Ratio for Deep Chlorobenzene Oxidation: Catalytic Mechanisms and Byproducts Analysis

Synthesis of CeO2–MnOx Mixed Oxides and Catalytic Performance under Oxygen-Rich Condition