Abstract:The temperature and wind in the middle and upper atmosphere can be obtained by recording the Doppler shift and broadening of the airglow emission, which is reflected by the interference ring from a ground-based Fabry–Perot interferometer (FPI) system. FPI observations are highly susceptible to weather and the external environment, which seriously affect the signal-to-noise ratio (SNR) of FPI interferograms. An SNR can significantly increase errors in determining the center of the interferogram, leading to inaccurate wind and temperature inversions. The calculation shows that the wind inversion from the interferogram decreases and the temperature increases for larger central errors. In this paper, we propose the maximum standard deviation method (MSDM) with high accuracy and robustness to determine the interference ring center. The performance of the MSDM is better achieved by using more than 100 1D interferogram bins to determine the center of interferograms. The robustness of the MSDM is investigated by computing numerous simulated interferograms with white Gaussian noise and Poisson noise, and compared with the two algorithms of binarization and peak fitting, which are usually used to invert wind and temperature from the interference ring of FPI. The results show that MSDM has higher accuracy and robustness than the other two algorithms. We also simulate the distortion interferogram when the FPI may be illuminated by inhomogeneous background light, which can introduce additional errors in wind and temperature, and the MSDM still performs better. Finally, we invert the wind and temperature from the real airglow interferogram by the Kelan (38.7°N, 111.6°E) FPI, which shows that both the wind and temperature inverted by MSDM better agree well with the FPI product than the other two algorithms. Therefore, the MSDM helps to improve the accuracy and stability to invert the wind and temperature.

Signal-to-noise ratio of a near-infrared static wind imaging Michelson interferometer.

A Spectroscopic Transmittance Analytical Modeling for Field-Widened Michelson Interferometer Employed by High Spectral Resolution Lidars

Field-widened Michelson Interferometer for Spectral Discrimination in High-Spectral-resolution Lidar: Theoretical Framework.

The Optical Throughput of Near-Infrared Static Wind Imaging Interferometer

Simulation of the Fixed Optical Path Difference of Near Infrared Wind Imaging Interferometer

Static wind imaging Michelson interferometer for the measurement of stratospheric wind fields

Signal-To-Noise Ratio of the Spatially Modulated Imaging Spectrometer Based on Modified Sagnac Interferometer

Measurement of Visibility and Phase Steps of a Static Wind Imaging Interferometer Assisted by Deep Learning.

Influence of the four-quadrant fixed mirror on the temperature and wind velocity inversion for the near-infrared static Mars wind imaging interferometer

Analysis of Signal-To-Noise Ratio of an Ultra-Compact Static Polarization Interference Imaging Spectrometer

Novel Imaging Interferometer for Upper High Speed Atmospheric Wind Field Survey

The Signal-to-noise Ratio of the Quarter Beam of Wind Imaging Polarization Interferometer?

Influence of the tilted arm glass on the temperature and wind velocity inversion for a static wind imaging interferometer

Wind Velocity Measurement with Wide Angle Divided Mirror Michelson Wind Imaging Interferometer

Inversion of Wind and Temperature from Low SNR FPI Interferograms

Novel Compact Polarized Martian Wind Imaging Interferometer

Study of SNR of a Novel Polarization Interference Imaging Spectrometer

Signal-to-noise Ratio Analysis Based on Different Space Remote Sensing Instruments

SNR analysis according to the practical factors for Mie-scattering lidar

[Analysis and Experimental Validation of Signal-to-noise for Limb Imaging Spectrometer].

Analysis of Signal-to-Noise Ratio Calculation for Satellite-Based Infrared Staring Sensor