A low-density wind tunnel for martian environment simulation
Chen Liu,Yiyong Wu,Jihong Yan,Lifang Li,Wen Zhou,Zhenguo Wang,Guoyou Zhang
2018-01-01
Abstract:A low-density wind tunnel has been designed and constructed at Harbin Institute of Technology for Martian environment simulation, which will be set in the context of current and future missions to the Martian surface. This work was part of the Space Environment Simulation and Research Infrastructure (SESRI), the National Major Sciences and Technology Project in China. The wind tunnel is driven by ejector and capable of providing controllable wind flow, of air or carbon dioxide, at Martian pressures (100–1500Pa), wind speeds (5–100 m/s) and dust aerosol suspension using Mars analogue materials. Crucial design features including mechanical design, ejector drive system, pressure control system, dust ejection system andbalance system will be presented. The ejector drive system succeeded in achieving the maximum flow velocity up to 100m/s at low pressure. The balance system can achieve the measurement of resistance, lift, pitch torque, roll torque and yaw torque of samples. Dust ejection into the wind flow is achieved by allowing a mixture of gas and dust to enter the chamber through a nozzle, thus forming a gas-solid two-phase flow field and transporting the dust to the test section, along with the real-time monitoring of dust concentration. The test section is cuboid, 0.2*0.2m in cross section and 0.4m long. The wind speed and turbulence in the test section was calculated by computational modelling technique dust validated experimentally using a pitot probe. Particle Image Velocimetry (PIV) system has been developed to measure velocity fields of dust. Three kinds of scientific study will be presented. First, the response of materials and instruments to dust or dust exposure, such as the durability of space suit during a dust storm. Secondly,granular transport experiments using PIV, such as the wind removal of the dust layeron solar array. Finally, the low reynolds number airfoil testing can be carried out by using the balance system.