Abstract:A low-density, high-specific surface area, high-strength and large-sized carbon aerogel preparation process is a key technology in the industrial application of aerogel science. In recent years, ingenious nanostructure design, along with salt templates, drying optimization and other strategies have been applied by numerous scientists. As a result, the specific surface area of carbon aerogel has significantly increased and the density reduced. However, the preparation of high-strength and large-sized intact carbon aerogel at low cost is still a challenge due to the limitations of thermal treatment equipment and drying process. In this study, we propose an improved preparation method of ambient pressure solvothermal polymerization and auxiliary ambient pressure drying by the principle of acid–base two-step catalysis using resorcinol and furfural as raw materials. Resultantly, the condensation and cross-linking reaction process is stabilized by the ambient pressure solvothermal polymerization, which effectively reinforces the interfacial bonding between primary particles and forms a high-strength skeleton. The breaking strength of the aerogels reach up to 9.74 MPa. The auxiliary ambient pressure drying can greatly reduce the drying shrinkage and density of the aerogel and solve the problems of drying deformation and cracking of large-sized carbon aerogel. The drying shrinkage and density of the obtained carbon aerogels are reduced to 3.22% and 0.203 g/cm 3 , respectively, and the specific surface area reaches 675.057 m 2 /g. Moreover, the large-sized sample (70 mm (d) × 25 mm (h)) can also be prepared by this method since the strength of skeleton can resist the capillary force of pore structure, and the nanoporous architecture can be perfectly retained. Therefore, this study provides a new preparation scheme for the industrial large-scale production and application of carbon aerogel.

Aerogel carbon nanotube, and methods for preparing the same, membrane and composite material containing the same

Ultralight, Elastic, Magnetic and Superhydrophobic Cellulose Nanofibril Based Aerogel with Layer-Support Structure Designed for Both Excellent Oil-Water Separation and Efficient PM2.5 Removal

Preparation of Cellulose/MWCNTs/TPU Micro-foam Composites

Facile Preparation of Carbon Nanotube Aerogels with Controlled Hierarchical Microstructures and Versatile Performance

Carbon Nanotube Spaced Graphene Aerogels with Enhanced Capacitance in Aqueous and Ionic Liquid Electrolytes

Ultralight Multiwalled Carbon Nanotube Aerogel.

Comparative Study of Aerogels Obtained from Differently Prepared Nanocellulose Fibers.

Robust Carbonaceous Nanofiber Aerogels from All Biomass Precursors

Preparing High-Quality Monolithic Carbon Nanotubes Reinforced Silica Aerogel Composites Based on a Vacuum Freeze-Drying Method

Gradient All-Nanostructured Aerogel Fibers for Enhanced Thermal Insulation and Mechanical Properties

Nanocellulose-based composite aerogels toward the environmental protection: Preparation, modification and applications

Flexible and Compressible Nanostructure-Assembled Aramid Nanofiber/Silica Composites Aerogel

Emerging Carbon-Nanofiber Aerogels: Chemosynthesis Versus Biosynthesis.

Shaping 90 wt% NanoMOFs into Robust Multifunctional Aerogels Using Tailored Bio-Based Nanofibrils

Nanocellulose-based aerogels with devisable structure and tunable properties via ice-template induced self-assembly

Aerogel nanoarchitectonics based on cellulose nanocrystals and nanofibers from eucalyptus pulp: preparation and comparative study

Low-density, high-strength and large-scaled monolithic carbon aerogels fabricated via modified ambient pressure drying

Cellulose Nanofibril (CNF) Based Aerogels Prepared by a Facile Process and the Investigation of Thermal Insulation Performance

Preparation method of carbon nanotube-silicon composite cathode material

Ambient-drying to construct unidirectional cellulose nanofibers/ carbon nanotubes aerogel with ultra-lightweight, robust, and superior microwave absorption performance

An Efficient and Economic Approach for Producing Nanocellulose-Based Aerogel from Kapok Fiber