Abstract:Lithium metal is considered as a potential anode for lithium batteries, but its commercialization process is hindered by several problems, including uncontrollable lithium dendrite growth, large volume expansion, low utilization of lithium and so on. To address these issues, in this work, lithiophilic silver layers with 80 nm thickness are coated on the commercial carbon cloth (CC) using thermal evaporation method to regulate Li growth during lithium plating process. We find that the uniformly distributed silver layers can successfully reduce lithium nucleation over-potential, thus inducing the homogeneous deposition of metal Li, supported by density functional theory calculation. Benefited from the as prepared lithiophilic Ag layers, the CC/Ag/Li anode with an ultrahigh areal capacity of 16 mAh cm(-2) is achieved adopting electrochemical deposition at 0.2 mA cm(-2) without the formation of lithium dendrites, which is confirmed by continuous detection using visual discrimination and scanning electron microscope observation. As a result, a stable dendrite-free CC/Ag/Li anode exhibits excellent electrochemical properties: (1) the assembled CC/Ag/Li symmetrical cell maintains a stable voltage hysteresis within 25 mV after cycling 750 hat a current density of 1 mA cm(-2); (2) The assembled CC/Ag/Li-LiFePO4 cell also demonstrates enhanced electrochemical behaviors in terms of rate performance and capacity retention; (3) When coupled with a carbon/sulfur cathode, the CC/Ag/Li anode also demonstrates excellent compatibility. The initial discharge capacity of the CC/Ag/Li-S cell is 899.3 mAh g(-1) at 0.2C, the reversible capacity retains a value of 587.7 mAh g(-1) after 400 cycles, corresponding to a capacity attenuation rate of 0.075% per cycle.

Lithium‐Metal Anodes Working at 60 Ma Cm−2 and 60 Mah Cm−2 Through Nanoscale Lithium‐Ion Adsorbing

Engineering Wavy‐Nanostructured Anode Interphases with Fast Ion Transfer Kinetics: Toward Practical Li‐Metal Full Batteries

An Interconnected Silver Coated Carbon Cloth Framework As a Host to Reduce Lithium Nucleation Over-Potential for Dendrite-Free Lithium Metal Anodes

Nanoarray Architecture of Ultra-Lithiophilic Metal Nitrides for Stable Lithium Metal Anodes

Metal-organic Framework Nanosheets-Guided Uniform Lithium Deposition for Metallic Lithium Batteries

An Ultrastable Lithium Metal Anode Enabled by Designed Metal Fluoride Spansules

Stable Li Metal Anode with Protected Interface for High-Performance Li Metal Batteries

Dendrites‐Free Lithium Metal Anode Enabled by Synergistic Surface Structural Engineering

Electrokinetic Phenomena Enhanced Lithium‐Ion Transport in Leaky Film for Stable Lithium Metal Anodes

Mesoporous Graphene Hosts for Dendrite-Free Lithium Metal Anode in Working Rechargeable Batteries

High-Power Li-Metal Anode Enabled by Metal-Organic Framework Modified Electrolyte

A High‐Performance Lithium Metal Battery with Ion‐Selective Nanofluidic Transport in a Conjugated Microporous Polymer Protective Layer

High‐Areal Capacity, High‐Rate Lithium Metal Anodes Enabled by Nitrogen‐Doped Graphene Mesh

Interconnected Hollow Carbon Nanospheres for Stable Lithium Metal Anodes.

A Dendrite‐Free Lithium Metal Anode Enabled by Designed Ultra‐Thin MgF 2 Nanosheets Encapsulated inside Nitrogen‐Doped Graphene‐Like Hollow Nanospheres

Lithium Induced Nano‐Sized Copper with Exposed Lithiophilic Surfaces to Achieve Dense Lithium Deposition for Lithium Metal Anode

Highly Reversible Lithium Metal Anode Enabled by 3D Lithiophilic‐Lithiophobic Dual‐Skeletons

Cation-Loaded Porous Mg2+-Zeolite Layer Direct Dendrite-Free Deposition toward Long-Life Lithium Metal Anodes

Ultrahigh-Capacity and Dendrite-free Lithium Metal Anodes enabled by Lithiophilic Bimetallic Oxides

Ultrahigh-current density anodes with interconnected Li metal reservoir through overlithiation of mesoporous AlF3 framework

Stabilized Li metal anode with robust C-Li3N interphase for high energy density batteries