Abstract:It is known that Ni-based superalloys possess superior mechanical properties in high-temperature and high-pressure environments. One of the drawbacks of these alloys is their tendency to oxidize at high temperatures. Improving their oxidation properties and obtaining a fundamental understanding of the underlying mechanism of their oxidation behavior are critical for high temperature applications. In this work, we manufactured IN792 Ni-based alloys with two different grain sizes to examine the effect of grain size on oxidation behavior at 850 o C and 980 o C. The oxidation rate became faster as the grain size became finer, and at 850 o C, the oxide layer was composed of external oxides (TiO 2 /NiO, Ni-Co-Cr-O, Cr 2 O 3 ), internal oxides (TiTaO 4 , non-oxidized layer, Al 2 O 3 ) and a precipitate-free zone (PFZ). At 980 o C, this structure became unstable due to the diffusion of Ni, and in particular, a lot of exfoliation of external oxides occurred in the coarse grain. Regardless of the structure of the oxide layers, the thickness of the PFZ increased significantly in the fine grains with a low  fraction. Compared to the hardness of external Cr-rich oxides of ~500 HV, the hardnesses of the internal oxides consisting of Al-rich and Ni-Al-O were approximately 1000 HV and 1500 HV, respectively. Therefore, the most vulnerable position is expected to be the interfacial boundary between the external oxide and internal oxide, and this resulted in the ease of exfoliation of the external oxide in this location, by exposing the Ni-Al-O oxide to the surface in the coarse grain at 980 o C. The current work can be a useful method in the design of Ni-based superalloys by controlling the grain size of the components.

Initial Oxidation of Ni-based Superalloy and Its Dynamic Microscopic Mechanisms: the Interface Junction Initiated Outwards Oxidation

Initial Oxidation of a Third-Generation Ni-Based Superalloy Analyzed by in Situ Environmental TEM

Oxidation Behavior and Mechanism of a Ni-based Single Crystal Superalloy with Single Α-Al2o3 Film at 1000 °C

Long-term Oxidation Behavior and Mechanism of DD6 Ni-based Single Crystal Superalloy at 1050 °C and 1100 °C in Air

In Situ Oxidation in Ni-Based Single-Crystal Superalloys with Varying Re Contents Observed by Environmental Transmission Electron Microscopy

First-principles thermodynamics and experimental study of interface oxidation in Ni/Ni 3 Al structures.

Influence of Surface Roughness on the Oxidation Behavior of a Ni-4.0Cr-5.7Al Single Crystal Superalloy

Microstructural evolution during exposure in air and oxidation behavior of a nickel-based superalloy

Understanding the Oxidation Behaviors of a Ni-Co-based Superalloy at Elevated Temperatures Through Multiscale Characterization

The high-temperature oxidation behavior and mechanism in a powder metallurgy Ni-based superalloy featuring δ-Nb3Al addition

Oxidation Behavior of Micro-Regions in Multiphase Ni<sub>3</sub>Al-Based Superalloys

Initial Oxidation Behavior of a Single Crystal Superalloy During Stress at 1150 °C

High-Temperature Oxidation Behavior of Ni-Based Superalloys with Nb and Y and the Interface Characteristics of Oxidation Scales

Effect of the Ni/Co Ratio on the Structural and Initial Oxidation Properties of NiCo-based Superalloys Revealed by in Situ Microscopy

High Temperature Oxidation Behavior of the Wrought Ni-based Superalloy GH4037 in the Solid and Semi-Solid State

Microstructure-dependent Oxidation Behavior of Ni-Al Single-Crystal Alloys

High Temperature Oxidation Behavior of a Novel Γ ′-Strengthened CoNi-Base Superalloy

High Temperature Oxidation Behavior of a Novel Cobalt-Nickel-base Superalloy

Effect of Grain Size on High Temperature Oxidation Behavior of IN792 Superalloy

Microstructural Evolution During Cyclic Oxidation of a Ni-based Singe Crystal Superalloy at 1100 °C

Isothermal oxidation behavior of micro-regions in multiphase Ni3Al-based superalloys