Abstract:Carbon-fiber reinforced composites are made up of three different phases. Tensile or compressive deformation in the longitudinal (fiber) orientation is controlled by the fibers, leading to a linear stress strain response which ends abruptly when the fibers fail by tensile fracture or kinking in compression. Conversely, major non-linear deformations can develop under transverse compression or in-plane shear because deformation is controlled by the polymeric matrix and the interphase.In this paper, first the V-notched rail shear test was used to research the mechanical properties of composite under in-plane shear loading, and the fracture surfaces of failed specimens were examined using scanning electron microscopy (SEM). The broken samples showed a large residual shear displacement. For [0/90](8s) cross-ply laminate V-notched beam test, the failure mode is the interactions of intralaminar and interlaminar failure. The intralaminar interfacial debonding, matrix cracking and interlaminar degradation occurs in succession. Then a representative volume element (RVE) of fiber random distribution was established, with two dominant damage mechanisms-matrix plastic deformation and interfacial debonding included in the simulation by the extended Drucker-Prager model and cohesive zone model respectively. The simulation results clearly reveal the damage process of the composites and the interactions of different damage mechanisms. It can be concluded that the in-plane shear fracture initiates as interfacial debonding and evolves as a result of interactions between interfacial debonding and matrix plastic deformation. The progressive damage process and final failure mode of in-plane shear model which are based on constitute are very consistent with the observed result under SEM of V-notched rail shear test. Also a transverse shear model was established as contrast in order to comprehensively understand the mechanical properties of composite materials under shear loading, and the progressive damage process and final failure mode of composite under transverse shear loading were researched.

Micromechanical Analysis of UD CFRP Composite Lamina under Multiaxial Loading with Different Loading Paths

Micro Failure Analysis of Fiber Metal Laminates

Progressive failure analysis of 2D woven composites at the meso-micro scale

Micromechanics-based Progressive Failure Analysis of Carbon FIber/epoxy Composite Vessel under Combined Internal Pressure and Thermomechanical Loading

Machine Learning and Materials Informatics Approaches for Predicting Transverse Mechanical Properties of Unidirectional CFRP Composites with Microvoids

Interaction of Multiple Micro-Defects on the Strength and Failure Mechanism of UD Composites by Computational Micromechanics

Influence of Fiber Cutting at the Composite Grid Intersection on the Compressive Performance of Laminate

Comprehensive inter-fibre failure analysis and failure criteria comparison for composite materials using micromechanical modelling under biaxial loading

Micromechanical modeling for longitudinal tensile property of unidirectional CFRP considering dispersion of fiber properties

Micromechanical Analysis of Mechanical Response for Unidirectional Fiber-Reinforced Plies

Collaborative Model in Brain-Computer Integration

Effect of resin-rich areas on failure behavior of unidirectional CFRP under transverse pure shear

An efficient micromechanics-based finite element model for failure analysis of laminated composites

Microstructure dependent transverse strength criterion for UD-CFRP composites via computational micromechanics and machine learning

An innovative computational framework for the analysis of complex mechanical behaviors of short fiber reinforced polymer composites

Micromechanical modeling of longitudinal compression behavior and failure mechanism of unidirectional carbon fiber reinforced aluminum composites involving initial fiber misalignment

A Method for Plotting Failure Envelopes of Unidirectional Polymer Composite Materials under Different Strain Rates

Microscopic Progressive Damage And Failure Analysis Of Carbon-Fiber Reinforced Composite Under Shear Loading

An integrated computational materials engineering framework to analyze the failure behaviors of carbon fiber reinforced polymer composites for lightweight vehicle applications

Development of a Numerical Material Model for Axial Crushing Mechanical Characterization of Woven CFRP Composites

3D FEA Modelling of Laminated Composites in Bending and Their Failure Mechanisms