Abstract:Because of the superiority in high theoretical capacity and environmental friendliness, SnO2 as an ideal anode material exhibits an application prospect in sodium-ion batteries. Nevertheless, its practical use is restricted by the poor electroconductivity and huge volume expansion. To solve these difficulties, a maneuverable and effective strategy is introduced to synthesis SnO2/C composites in this work. For the operation, the composites are prepared via a one-pot hydrothermal technique. For the effect, SnO2 particles disperse uniformly on the pitch-derived carbon matrix in nanometer size. The impacts of the pyrolysis temperature and SnO2 content are investigated in detail. It is surprising that the diameter of the SnO2 particle is ∼5 nm observed by high-resolution transmission electron microscopy, and the Sn–O–C bond exists, confirmed by X-ray photoelectron spectroscopy. In comparison to the carbonaceous substrate and pure SnO2, the composite shows higher storage capacity and greater cycle performance that SnO2/C-2 delivers a charge specific capacity of 311.8 mAh g–1 at 100 mA g–1 initially and a residual capacity of 144.2 mAh g–1 after 1000 cycles at 500 mA g–1. The remarkable electrochemical performance benefits from the nanosized SnO2 particles with high dispersion as well as the tight link between SnO2 and the carbon matrix.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.1c00887?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.1c00887</a>.SEM images of MTP and ACM (Figure S1), water contact angle of MTP and ACM (Figure S2), high-resolution XPS spectra of SnO2 powder (Figure S3), SEM images of the SnO2/C-2 electrode before and after 100 cycles (Figure S4), cycling performance of SnO2/C-2 at 0.5 A g–1 for 100 cycles (Figure S5), CV curves and charge/discharge curves of ACM-500 (Figure S6), and EIS spectra of the SnO2/C-2 anode before and after cycle (Figure S7) (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.1c00887/suppl_file/ef1c00887_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Uniform Nano-SnO2/C Composite Anodes from Coal Tar Pitch for Sodium-Ion Batteries

Uniform Nano-SnO 2 /C Composite Anodes from Coal Tar Pitch for Sodium-Ion Batteries

Honeycomb-inspired Design of Ultrafine SnO2@C Nanospheres Embedded in Carbon Film As Anode Materials for High Performance Lithium- and Sodium-Ion Battery

Facile Preparation of One-Dimensional Hollow Tin Dioxide@carbon Nanocomposite for Lithium-Ion Battery Anode

Optimization of SnO2 Nanoparticles Confined in a Carbon Matrix towards Applications as High-Capacity Anodes in Sodium-Ion Batteries

Carbon-Coated SnS Nanosheets Supported on Porous Microspheres as Negative Electrode Material for Sodium-Ion Batteries

A Robust Integrated SnOx/Carbon Composite Anode for Sodium-Ion Batteries

Nano-SnO2/Carbon Nanotube Hairball Composite As a High-Capacity Anode Material for Lithium Ion Batteries

Bulk SnOx@C Composite for Improved Lithium Storage

Nanoconfined SnO2/SnSe2 heterostructures in N-doped carbon nanotubes for high-performance sodium-ion batteries

Synthesis of CoS2 Nanoparticles/Nitrogen‐Doped Graphitic Carbon/Carbon Nanotubes Composite As an Advanced Anode for Sodium‐Ion Batteries

Facile Synthesis of Ultrasmall Tin Oxide Nanoparticles Embedded in Carbon As High-Performance Anode for Lithium-Ion Batteries

Ultrafine SnO 2 Nanoparticles Decorated on N-Doped Highly Structurally Connected Carbon Nanospheres as Anode Materials for High-Performance Sodium-Ion Batteries

Monodispersed SnO2 Nanospheres Embedded in Framework of Graphene and Porous Carbon As Anode for Lithium Ion Batteries

Sn/SnO 2 @C Composite Nanofibers As Advanced Anode for Lithium-Ion Batteries

A Nano-Rattle SnO2@carbon Composite Anode Material for High-Energy Li-ion Batteries by Melt Diffusion Impregnation

Facile synthesis of ultrafine SnO2 nanoparticles embedded in carbon networks as a high-performance anode for lithium-ion batteries

Uniform integration of amorphous SnO2 nanoparticles encapsulated into the carbon matrix as enhanced electrochemical performance anodes for lithium-ion batteries

Synthesis of SnO2/Sn@carbon Nanospheres Dispersed in the Interspaces of a Three-Dimensional SnO2/Sn@carbon Nanowires Network, and Their Application As an Anode Material for Lithium-Ion Batteries

Co3O4/carbon Allotrope Composites As Anode Material for Sodium-Ion Batteries

In Situ Synthesis of SnO2nanoparticles Encapsulated in Micro/mesoporous Carbon Foam As a High-Performance Anode Material for Lithium Ion Batteries