Abstract:This study focuses on the application of nanofluids in the context of automobile radiators. The integration of nanofluids in automotive cooling systems, particularly radiators, presents a promising avenue for enhancing heat transfer efficiency. Because they have enhanced thermal conductivity and are engineered suspensions of nanoparticles in base fluids, nanofluids are a desirable solution for addressing heat dissipation issues in car radiators. The core idea of this study is to improve the work done on radiators by selecting an ideal nanofluid with nanoparticles that have a faster rate of heat transmission, thereby reducing the additional work required to maintain the coolant temperature while concurrently achieving higher heat transfer rates between the radiator and coolant. This study also gives a comprehensive overview of nanofluids, including the types of nanofluids (unary and hybrid), methods for their preparation, and the key characteristics required for nanoparticles to be effective and safe for use in nanofluid coolants. It further discusses the properties of specific nanoparticles such as Al 2 O 3 , ZnO, SiO 2 , and CuO, highlighting their thermal characteristics and potential advantages when incorporated into nanofluids. The experimental setup for testing the industrial coolant and prepared nanofluids using an automobile radiator is described in detail. The setup includes a pump to circulate the coolant, a heat source that replicates the engine's heat, and thermocouples to detect temperature changes at both the inlet and outlet. The experimental results are presented in the form of graphs, demonstrating the average cooling performance of each nanofluid mixture. The study also addresses the importance of nanofluid stabilization and describes various tests conducted to check the quality and specific properties of the nanoparticles and nanofluids, including zeta potential, thermal conductivity, FTIR, and pH tests. To test the prepared nanofluids, a radiator setup with real-time temperature measurement has been fabricated and upon experimentation, the ethylene glycol- and water-based nanofluids, with 0.1 mass% nanoparticles show better stability and cooling performance than the nanofluids with 0.2, 0.3 mass% of nanoparticles and with propylene glycol and water-based nanofluids, with 0.1, and 0.2 mass% nanoparticles show better stability and cooling performance than the nanofluids with 0.3 mass% nanoparticles. The study's findings suggest that the optimum addition of nanoparticles in the radiator coolant will result in enhanced cooling performance of the radiator.

EXPERIMENTAL INVESTIGATION ON HEAT TRANSFER ENHANCEMENT OF A RADIATOR IN A SIMULATED PEMFC COOLING SYSTEM USING HEXAGONAL BORON NITRIDE NANOFLUIDS

Experimental investigation of the thermal performance of a radiator using various nanofluids for automotive PEMFC applications

Model-Based Performance Optimization of Thermal Management System of Proton Exchange Membrane Fuel Cell

Numerical Investigation on the Temperature Distribution Inside the Engine Compartment of a Fuel Cell Vehicle with Nanofluids As Coolant

Numerical Analysis of Static and Dynamic Heat Transfer Behaviors Inside Proton Exchange Membrane Fuel Cell

Design and Modelling of 3D Bionic Cathode Flow Field for Proton Exchange Membrane Fuel Cell

Research Progress of Heat Transfer Inside Proton Exchange Membrane Fuel Cells

Numerical and Experimental Investigation of Enhanced Heat Transfer Radiator Through Air Deflection Used in Fuel Cell Vehicles

Research on Control Algorithm of Proton Exchange Membrane Fuel Cell Cooling System

Paper Experimental Investigation on Thermal Management of Proton Exchange Membrane Fuel Cell Stack Using Micro Heat Pipe Array

Advancing heat management in proton-exchange membrane fuel cells through hybrid nano-composite phase change materials

An experimental approach to predict the effect of ethylene and propylene glycol-based hybrid nanofluids in a heat exchanger setup

Investigation of heat and mass transfer properties of the wave staggered round table cooling flow field with a three-stage forked distribution zone

Numerical study on heat transfer characteristics and performance evaluation of PEMFC based on multiphase electrochemical model coupled with cooling channel

Heat Transfer Enhancement by Hybrid Nano Additives—Graphene Nanoplatelets/Cellulose Nanocrystal for the Automobile Cooling System (Radiator)

Numerical and Experimental Analyses of a Novel Type PEMFC Coolant Channel

Augmenting the heat transfer performance of automobile radiators by combining surface modification and nanofluid techniques

Performance Prediction of Plate-Fin Radiator for Low Temperature Preheating System of Proton Exchange Membrane Fuel Cells Using CFD Simulation

Liquid Cooling Techniques in Proton Exchange Membrane Fuel Cell Stacks: A Detailed Survey

Experimental Study to Improve the Hydrodynamic and Thermal Efficiencies of a Cross-Flow Car Radiator Using a New Prepared Hybrid Nanofluid Composed of Graphene Oxide and Silicon Oxide Nanoparticles Dispersed in Water–Ethylene Glycol Fluid

A Novel Radiator Structure for Enhanced Heat Transfer Used in PEM Fuel Cell Vehicle