Microstructure, texture, and compressive properties of TC11/TC17 linear friction welded joint at elevated temperatures
Pengkang Zhao,Yifan Tao,Kui Fang,Meiling Guo,Qiaoling Chu,Jun Tao,Qilong Yuan,Yan Li
DOI: https://doi.org/10.1016/j.msea.2022.143880
2022-09-27
Abstract:The effect of thermomechanical coupling on the microstructure, texture, and compression properties of TC11/TC17 titanium alloy joint prepared by linear friction welding was studied in this work. The results show that the increased temperature decreases the texture density, dislocation density, and deformed grain, but increases the proportions of recrystallization grain and leads to a high Schmid factor. Moreover, more fine martensite α′ phase transforms into the β phase in the TC17 welded zone, and the width of the platelet α′ phase increases slightly in the TC11 welded zone. The β phase has two key slip systems, i.e., {110} and {112} . For the α phase, there are large fractions at approximately 64° and 85°, corresponding to the {112 ̅2} contraction twin and the {101 ̅2} extension twin. As compared to the TC17 side, less deformation occurs along the TC11 side. In addition, the compression strength decreases significantly, and the microhardness values of the joint decline gradually with the increase in temperature.
materials science, multidisciplinary,nanoscience & nanotechnology,metallurgy & metallurgical engineering