Abstract:Wood-based sandwich composite with a paper honeycomb core, especially for thick boards, has the advantage of high strength-to-weight ratio for the use in lightweight furniture products, interior walls etc. Employing both theoretical and experimental methods, this study investigated the influencing factors of various failure modes and its transition to obtain optimized structural parameters after a quasi-static load was applied. The results reveal that the skins of MDF are too strong for the paper honeycomb core. Both failure modes are caused by weak core properties. If the thickness or strength of the skins could be reduced or the core strength could be reinforced, then optimal failure mode of simultaneous core and skin failure could be reached. The intersection point of three transition lines is the best combination of structural parameters, meaning highest strength-to-weight ratio. At this point, failure of core shear, indentation and face fracture occurs simultaneously. The distance from a structural parameter to intersection is an effective index to express the degree of optimization for the strength-to-weight ratio of composites. Specimens close to the intersection point have optimal structural parameters and high strength-to-weight ratio. On application level, the optimum strength-to-weight ratio could be obtained easily by adjusting the surface or core thickness, if the materials were fixed first.

Compression Behavior and Failure Modes of Wood-Based Lattice Core Sandwich Structure with Improved Relative Density

Design and compressive behavior of a wood-based pyramidal lattice core sandwich structure

Compressive and Bending Behaviours of Wood-Based Two-Dimensional Lattice Truss Core Sandwich Structures

Compression Behaviour of the Wood-Based X-type Lattice Sandwich Structure

Optimization and Compressive Behavior of Composite 2-D Lattice Structure

Influence of Geometric Parameters on Flatwise Compression Properties of a Novel Lattice Sandwich

Core Configuration and Panel Reinforcement Affect Compression Properties of Wood-Based 2-D Straight Column Lattice Truss Sandwich Structure

The Edgewise Compressive Behavior and Failure Mechanism of the Composite Y-frame Core Sandwich Column

Mechanical and energy absorption properties of the composite XX-type lattice sandwich structure

Mechanical Properties and Failure Mechanisms of Sandwich Panels with Ultra-Lightweight Three-Dimensional Hierarchical Lattice Cores

Structural analysis and strength-to-weight optimization of wood-based sandwich composite with honeycomb core under three-point flexural test

Investigation on manufacturing and mechanical behavior of all-composite sandwich structure with Y-shaped cores

Compression and Bending Performances of Carbon Fiber Reinforced Lattice-Core Sandwich Composites

Dynamic Compression Failure Mechanisms and Dynamic Effects of Integrated Woven Sandwich Composites

Compression Property of a Novel Lattice Sandwich Structure

Failure of carbon fiber composite sandwich cylinders with a lattice core under axial compressive loading

Compression and energy absorption of wood-based reinforced 3D Kagome lattice structures

In-Plane Compression of Hollow Composite Pyramidal Lattice Sandwich Columns

The Flexural Behaviour of Composite Sandwich Beams with a Lattice-Web Reinforced Wood Core

An Efficient Method for Design of Lattice Core Sandwich Structures with Superior Buckling Strength under Compression

Deformation and Failure Behavior of Wooden Sandwich Composites with Taiji Honeycomb Core under a Three-Point Bending Test