Abstract:Reducing the membrane surface negative charge density and properly enlarging the pore size could benefit the selective and efficient separation of divalent cations from monovalent cations desired by many applications (e.g., Li+/Mg2+ separation) using nanofiltration (NF) by synergistically exploiting the Donnan and steric effects. This study provides a one-step tactic for the preparation of such membranes by simply introducing a small percentage of sulfuryl chloride (SO2Cl2) into the organic phase of trimesoyl chloride (TMC). This method is adaptable to the classical interfacial polymerization (IP) technique. The key conditions include a sufficient high concentration of piperazine (PIP) in the aqueous phase (e.g., 2.0 wt %) and a low-to-medium concentration ratio of sulfuryl chloride to TMC. An as-prepared membrane, which manifested a high Li+/Mg2+ selectivity of 22.2, exhibited a high rejection of MgCl2 at 92%, a low rejection of Na2SO4 at 34%, and a relatively high water permeance of 11.1 L m(-2) h(-1) bar(-1). We propose that the sulfuryl chloride monomers mainly played an interferential role rather than largely being incorporated into the polyamide matrix. This was demonstrated by the very low sulfur element composition in the active layer and the substantially enlarged membrane pore size in comparison to that of the control membrane. Adding sulfuryl chloride into the organic phase could allow more PIP monomers to diffuse through the enlarged structure to the superficial surface of the membrane, leaving more unreacted amine groups endowed with positive charges. Moreover, the addition of sulfuryl chloride could greatly change the membrane surface and structural morphologies, and in turn the surface roughness, by increasing the number of large ring-like structures and/or rougher nodules that could cover almost the entire membrane surface. Therefore, this work demonstrated that the membranes fabricated by the novel approach could have practical applications for cation separation.

Preparation of monovalent cation perm-selective membranes by controlling surface hydration energy barrier

Enhanced Monovalent Selectivity of Cation Exchange Membranes Via Adjustable Charge Density on Functional Layers

Asymmetric porous monovalent cation perm-selective membranes with an ultrathin polyamide selective layer for cations separation

Surface Coating Of A Side-Chain Type Polyelectrolyte For Endowing Perm-Selectivity Between Specific Anions To An Anion-Exchange Membrane With A Small Loss Of Membrane Conductivity

Amphiphilic Interlayer Regulated Interfacial Polymerization for Constructing Polyamide Nanofiltration Membranes with High Perm-Selectivity of Mono-/Divalent Salts

SPPO-based Cation Exchange Membranes with a Positively Charged Layer for Cation Fractionation

Cation-Permselective Membranes Enabled by Synergistic Ion Channels of Crown Ethers and Anionic Sites

Novel Electrodialysis Membranes with Hydrophobic Alkyl Spacers and Zwitterion Structure Enable High Monovalent/divalent Cation Selectivity

Layer-by-layer Assembly of Cation Exchange Membrane for Highly Efficient Monovalent Ion Selectivity

Surface-Functionalized Cation Exchange Membrane by Covalent Immobilization of Polyelectrolyte Multilayer for Effective Separation of Mono- and Multivalent Cations

Electro-Driven in Situ Construction of Functional Layer Using Amphoteric Molecule: the Role of Tryptophan in Ion Sieving

Highly Efficient Li+/Mg2+ Separation of Monovalent Cation Permselective Membrane Enhanced by 2D Metal Organic Framework Nanosheets

Simultaneously Modulating Nanofiltration Membrane Surface Charges and Pore Size in Pursuit of Effective Cation Separation Via a Bi-Functional Monomers-Interfered IP Reaction

Zwitterion Structure Membrane Provides High Monovalent/divalent Cation Electrodialysis Selectivity: Investigating the Effect of Functional Groups and Operating Parameters

Poly(alkyl-biphenyl pyridinium)-Based Anion Exchange Membranes with Alkyl Side Chains Enable High Anion Permselectivity and Monovalent Ion Flux

Physical and chemical synergistic strategy: A facile approach to fabricate monovalent ion permselective membranes

Efficient ion sieving and ion transport properties in sub-nanoporous polyetherimide membranes

Cation exchange membrane integrated with cationic and anionic layers for selective ion separation via electrodialysis

Preparation of Monovalent Cation Selective Membranes Through Annealing Treatment

Electro-nanofiltration Membranes with Positively Charged Polyamide Layer for Cations Separation

Mussel-Inspired Monovalent Selective Cation Exchange Membranes Containing Hydrophilic MIL53(Al) Framework for Enhanced Ion Flux