Abstract:Reducing the membrane surface negative charge density and properly enlarging the pore size could benefit the selective and efficient separation of divalent cations from monovalent cations desired by many applications (e.g., Li+/Mg2+ separation) using nanofiltration (NF) by synergistically exploiting the Donnan and steric effects. This study provides a one-step tactic for the preparation of such membranes by simply introducing a small percentage of sulfuryl chloride (SO2Cl2) into the organic phase of trimesoyl chloride (TMC). This method is adaptable to the classical interfacial polymerization (IP) technique. The key conditions include a sufficient high concentration of piperazine (PIP) in the aqueous phase (e.g., 2.0 wt %) and a low-to-medium concentration ratio of sulfuryl chloride to TMC. An as-prepared membrane, which manifested a high Li+/Mg2+ selectivity of 22.2, exhibited a high rejection of MgCl2 at 92%, a low rejection of Na2SO4 at 34%, and a relatively high water permeance of 11.1 L m(-2) h(-1) bar(-1). We propose that the sulfuryl chloride monomers mainly played an interferential role rather than largely being incorporated into the polyamide matrix. This was demonstrated by the very low sulfur element composition in the active layer and the substantially enlarged membrane pore size in comparison to that of the control membrane. Adding sulfuryl chloride into the organic phase could allow more PIP monomers to diffuse through the enlarged structure to the superficial surface of the membrane, leaving more unreacted amine groups endowed with positive charges. Moreover, the addition of sulfuryl chloride could greatly change the membrane surface and structural morphologies, and in turn the surface roughness, by increasing the number of large ring-like structures and/or rougher nodules that could cover almost the entire membrane surface. Therefore, this work demonstrated that the membranes fabricated by the novel approach could have practical applications for cation separation.

Physical and chemical synergistic strategy: A facile approach to fabricate monovalent ion permselective membranes

Fabrication of a Cation-Exchange Membrane Via the Blending of SPES/N-Phthaloyl Chitosan/MIL-101(Fe) Using Response Surface Methodology for Desalination

Electro-Driven in Situ Construction of Functional Layer Using Amphoteric Molecule: the Role of Tryptophan in Ion Sieving

Cation exchange membrane integrated with cationic and anionic layers for selective ion separation via electrodialysis

Cation-Permselective Membranes Enabled by Synergistic Ion Channels of Crown Ethers and Anionic Sites

Surface Modification of Anion Exchange Membrane by Covalent Grafting for Imparting Permselectivity Between Specific Anions

Anion permselective membranes with chemically-bound carboxylic polymer layer for fast anion separation

Ionic Control of Functional Zeolitic Imidazolate Framework-Based Membrane for Tailoring Selectivity toward Target Ions

Fouling Deposition As an Effective Approach for Preparing Monovalent Selective Membranes

Simultaneously Modulating Nanofiltration Membrane Surface Charges and Pore Size in Pursuit of Effective Cation Separation Via a Bi-Functional Monomers-Interfered IP Reaction

Simultaneous Manipulation of Membrane Enthalpy and Entropy Barriers towards Superior Ion Separations

SPPO-based Cation Exchange Membranes with a Positively Charged Layer for Cation Fractionation

Alternating electric field-based ionic control and layer-by-layer assembly of anion exchange membranes for enhancing target anion selectivity

Pilot-scale Poly(alkyl-Biphenyl Pyridine)-Based Monovalent Anion Perm-Selective Membranes with Exceptional Cl-/SO42- Selectivity in Ion-Distillation

Engineering “fishnet-like” structure to boost the monovalent anion selectivity of anion exchange membranes for electrodialysis applied in organic solvent systems

In-Situ Combination of Bipolar Membrane Electrodialysis with Monovalent Selective Anion-Exchange Membrane for the Valorization of Mixed Salts into Relatively High-Purity Monoprotic and Diprotic Acids.

Zwitterion Structure Membrane Provides High Monovalent/divalent Cation Electrodialysis Selectivity: Investigating the Effect of Functional Groups and Operating Parameters

Revolutionary MOF-enhanced anion exchange membrane for precise monovalent anion separation through structural optimization and doping

Highly Charged Hierarchically Structured Porous Anion Exchange Membranes with Excellent Performance

Novel Electrodialysis Membranes with Hydrophobic Alkyl Spacers and Zwitterion Structure Enable High Monovalent/divalent Cation Selectivity

Selective Electrodialysis: Opportunities and Challenges