Abstract:Mechanical behaviour of twenty-eight longitudinal lap-welded joints made of high strength steels (HSS) under tension load was investigated by experimental and numerical study. Weaknesses due to traditional deformation measurements for fillet welded joints can be perfectly solved by digital image correlation techniques (DIC). Distribution and development of strain field throughout the specimens along the whole loading process were recorded by DIC measurement. The effect of parameters (e.g. weld size, weld length and mismatch ratio) on mechanical properties (e.g. ultimate strength, failure modes, weld ductility and fracture angle) of longitudinal fillet welds and transverse fillet welds, which was introduced in detail in previous work by the authors, were compared. Generally, because of the difference on the combination of shear force and tension force, the fracture angle of longitudinal welded specimens (around <math>50∘</math>) were much more divergent from transverse welded specimens (around <math>20∘</math>) even though both of them failed at welded zone (welded zone only refers to weld metal in this paper), resulting that the mean strength of longitudinal welded specimens were only 0.58 time of transverse welded specimens. Conversely, the mean deformation capacity of longitudinal welded specimens was almost 4.0 times of transverse welded specimens. All longitudinal welded specimens have "platform" or "decline" feature while all transverse welded specimens have "rise" or "platform" feature load-deformation curves. Generally, the specimens with "rise" feature load-deformation curve are more likely to suffer sudden fracture, while specimens with "decline" or "platform" feature have satisfactory ductility performance. Based on the strain distribution and development features provided by DIC measurement, a new strength criterion, in which the ultimate strain obtained in relevant coupon tests was an indicator, was proposed and through the comparison between the numerical results and test results, its validation was verified by FE simulation. Moreover, it was confirmed that the predicted loads of EC3 and AISC Specification were close and slightly conservative for all specimens.

Numerical Analysis of the Deformation Behavior of 2205 Duplex Stainless Steel TIG Weld Joint Based on the Microstructure and Micro-Mechanical Properties

A study of local mechanical properties of 304L SS welded joints subjected to cyclic straining using depth-sensing instrumented indentation

DIC/DSI Based Studies on the Local Mechanical Behaviors of HR3C/T92 Dissimilar Welded Joint During Plastic Deformation

Use of instrumented indentation testing to study local mechanical properties of 304L SS welded joints subjected to low-cycle fatigue loadings

Estimation of Residual Stresses by Nanoindentation in an Experimental High Strength Microalloyed Steel Subjected to Rapid Thermal Cycles

Micro-mechanics investigation of heterogeneous deformation fields and crack initiation driven by the local stored energy density in austenitic stainless steel welded joints

Micromechanical Observation and Numerical Simulation for Local Deformation Evolution of Duplex Stainless Steel

Microstructure-Based Modeling of Deformation in Steels Based on Constitutive Relationships from Micropillar Compression

Synthetical Effect of Material Inhomogeneity and Welding Defects on Fatigue Behavior of 2205 Duplex Stainless Steel Cruciform Welded Joints: Experiments and Life-prediction Model

Determination of Local Constitutive Behavior and Simulation on Tensile Test of 2219-T87 Aluminum Alloy GTAW Joints

Numerical and experimental study on thermal-metallurgical-mechanical behavior of high-strength steel welded joint

Microstructure Formation and Its Effect on Mechanical Properties for Duplex Stainless Steel 2205 Plasma Arc Welded Joint

Fatigue Failure Mechanism of Duplex Stainless Steel Welded Joints Including Role of Heterogeneous Cyclic Hardening/softening: Experimental and Modeling

Experimental and Numerical Evaluation on Deformation and Fracture Mechanism of Cast Duplex Stainless Steel Tubular Specimen

Nano-twining and Deformation-Induced Martensitic Transformation in a Duplex Stainless Steel 2205 Fabricated by Laser Powder Bed Fusion

Research on Microstructure and Mechanical Properties of Square Wave Alternating Current Tungsten Inert Gas Welded Joints in 2219-T6 Aluminum Alloy

Microstructure-Based Modeling of the PMZ Mechanical Properties in 2219-T8 Aluminum Alloy TIG Welding Joint

Microstructural evolution and its effect on mechanical properties in different regions of 2219-C10S aluminum alloy TIG-welded joint

A Numerical Simulation Method Considering Solid Phase Transformation and the Experimental Verification of Ti6Al4V Titanium Alloy Sheet Welding Processes

Mechanical behaviour of longitudinal lap-welded joints of high strength steel: Experimental and numerical analysis

The Effect Of The Variation Of Microstructure In The Friction Stir Welded Zone On The Strain And Tensile Properties Of Al2139