Abstract:In this paper, a novel patch resonator is proposed to realize wideband and dual-band bandpass filter (BPF) with small frequency ratio. The introduction of metallic vias and slots on the patch enables the flexible control of the resonant frequencies of TM01, two degenerated modes of TM11, and TM21. Two stubs loaded on the patch and coupled with I/O feeding line can introduce two additional resonant modes, and facilitate the control of input/output coupling strength. Owing to the different coupling relationships between the stub modes and two degenerated modes of TM11, the transmission zeros (TZs) located at the center of passband can be eliminated or generated by altering their resonant order, thus realizing wideband or dual-band operation. For demonstration, two prototypes are simulated, fabricated and measured. Good agreement can be observed between simulation and measurement. The implemented wideband BPF has a passband from 1.85 GHz to 3.03 GHz with six transmission poles (TPs). While the implemented dual-band BPF operates at 1.8/2.45 GHz with three TPs within each band and two TZs between two bands. Small frequency ratio of 1.33 is achieved. Wide upper stopband and low insertion loss can be observed for both prototypes.

Design of Wideband/dual‐band Bandpass Filter Using a Vias and Slots Loaded Sector Circular Patch Resonator

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

Design of a Multilayer Dual-Band Balanced Bandpass Filter on a Circular Patch Resonator

Miniaturized Dual-Mode Dual-Band BPF Using a Single Square Patch Loaded Stepped-Impedance Square Open Loop Resonator

COMPACT MICROSTRIP DUAL-MODE DUAL-BAND BANDPASS FILTERS USING STUBS LOADED COUPLED LINE

QUASI-ELLIPTIC WIDEBAND BANDPASS FILTERS USING STUBS LOADED ANTI-PARALLEL COUPLED-LINE

Compact Dual-Band Bandpass Filter Using Stubs Loaded Ring Resonator

Highly selective microstrip bandpass filters using dual-mode patch resonator loaded with short via

Dual-Mode Dual-Band Bandpass Filter Based on a Stub-Loaded Patch Resonator

Compact Quad-Mode BPF Based on Half-Mode Short-Circuited Semicircular Patch Resonator

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Design Of Wideband Bandpass Filter Using Short-Circuited Circular Patch Resonator Loaded With Slots

A Fully Packaged Bandpass Filter on Stripline Patch Resonator With Wide Upper Stopband

Novel Bandpass Filter Based on Dual-Mode Stub-Loaded. Slotline Resonant Cell

Dual-Band Bandpass Filter with Wide Upper Stopband Using Novel Stepped Impedance Stub-Loaded Quad-Mode Resonator

Triple‐mode Bandpass Filter Based on Short‐circuited Patch Resonator

Dual-wideband Bandpass Filter Based on a Dual-Stubs Loaded Half-Wavelength Resonator

A Quad‐band Bandpass Filter Using Split‐ring Based on T‐shaped Stub‐loaded Step‐impedance Resonators

Compact Wideband Bandpass Filter Based on Double-T-shaped Stub Loaded Resonator and Loading Technique for Zero-Voltage Point

DUAL-MODE BPF WITH FOUR TRANSMISSION ZEROS USING S-L COUPLING STRUCTURE WITH QUADRATIC FUNCTION COUPLING COEFFICIENT

Novel Balanced Single/Dual-band Bandpass Filters Based on Circular Patch Resonator