Abstract:The demand for the power grid system's capacity to undergo peak-shaving is increasing as the proportion of renewable energy rises. In China, nuclear power units usually only provide a base load operation in the view of safety and economic considerations, but they do not provide load adjustment services, which undoubtedly increases the pressure of grid load adjustment. In this paper, a novel flexibility load adjustment strategy of the CHP nuclear unit is studied, which is achieved by introducing the thermal storage tank (TST) into the Rankine cycle without changing the output of the nuclear reactor. The AP1000 pressurized water reactor nuclear power unit for combined heat and power is taken as an example, and the thermodynamic model is established through the water vapor equation. Furthermore, the reference system is simulated for the goal of minimizing the imbalance between power supply and demand, and the flexibility–environment–economy benefits are evaluated. The results show that the heat storage/release of the TST may achieve power output flexible adjustment of the nuclear unit, and the power imbalance of the reference energy system is reduced from 1107.99 MWh to 457.24 MWh, a reduction of 58.73%. The introduction of a 600 MWh TST can enable the reference unit to contribute 335 MWh of peak electricity within the reference day. From the perspective of replacing the power generation output increment of coal-fired power units with equal amounts, it can achieve a reduction of 106.09 tons of coal consumption in the case day, which means that 277.73 tons of CO2 emissions can be reduced. The profit of the reference unit can be improved by CHY 70,125 via participating in load adjustment in the case day if following the time-of-use electricity price.

A Method for Adding Large-scale Nuclear Power Plant Units into a Limited Grid: A Case Study of the Sudanese Grid

Coordinated protection and control between largecapacity nuclear power plants and power grids

Coordination and Control Principle Between Grid-related Protection of Large-scale Nuclear Units and Security Automatic Devices of Power Grids

Interaction and Coordination among Nuclear Power Plants, Power Grids and Their Protection Systems

From Grid Feeding to Grid Supporting Converters: A Constant Power Active Distribution Network Perspective.

An Integrated Source-Grid-load Planning Model at the Macro Level: Case Study for China's Power Sector

Design and simulation of a 1-GWp solar photovoltaic power station in Sudan

Study of Load Adjustment Strategy for Nuclear Power Units Focusing on Rankine Cycle: Flexibility–Environment–Economy

Technical and Economic Aspects of Load Following with Nuclear Power Plants

Editorial for Computer Networks Special Issue on “Measurement-Based Optimization of P2P Networking and Applications”

Long-Term Scheduling of Provincial Power Grid With Rich Hydropower

Capacity Limitation of Nuclear Units in Grid Based on Analysis of Frequency Regulation

The Future Role of Nuclear Power in the Coal Dominated Power System: the Case of Shandong

A Novel Source-grid-load-storage Coordinated Power System Expansion Planning Model: A Case Study on China's Power System Transition

Efficiency and economic assessment of combining nuclear power plants with multifunctional heat accumulation systems

PowNet: a power systems analysis model for large-scale water-energy nexus studies

Modeling Low Carbon and Low-Cost Electricity Supply for Pakistan

Optimal operation strategies of pumped storage hydropower plant considering the integrated AC grids and new energy utilization

Multi-Objective Optimization Design for Nuclear-Coupled Distributed Multi-Energy System in Alpine Region

Analysis of Power Load Tracking and Regulation Performance in a Distributed Multi-Energy Coupled System with Nuclear and Solar Sources

Power transmission expansion planning considering large bulk power injection